Text
stringlengths 211
1.56k
|
|---|
How do I obtain a replacement for a lost driving license? In case the primary driving license is lost, and the incident is proven by an investigation conducted by the internal security forces, a replacement driving license will be issued.
The required documents for non-expired lost driving licenses are a copy of the report organized by the internal security forces, a copy of the identity card, civil status extract, or passport copy. Non-Lebanese must show a valid residency. A certified passport-size photo.
For expired lost driving licenses (in addition to the above documents a medical certificate issued by the Medical Association, bearing the applicant's photo, not older than three months, a criminal record not older than three months, a blood type card or certificate and an application submitted to the head of the unit in Dekwaneh, Ouzai, Sidon, Nabatieh, Zahle, Tripoli, Aley, or Jounieh.
Note that if the primary license is found, the replacement license must be returned to the Market Department.
|
How to replace the military driving license for service members on active duty? Service members on active duty can obtain a civilian driving license based on their military driving license in the same category, whether the service member does not have a civilian driving license or has one and wants to add a category previously obtained by the military driving license.
The required documents are Form No. 2 (Army, General Security, and State Security) or Form No. 1 (Internal Security Forces) (a military ID must be shown upon attendance), the military license and a copy of it, a statement issued by the corps to which the applicant belongs, specifying the obtained categories, the civilian driving license, if available, two certified passport-size photos, a medical examination showing the applicant's blood type, and a military or civilian medical certificate. |
How to obtain a certificate or form for a driving license to be submitted to the relevant authorities abroad? This form enables the holder to exchange a Lebanese driving license for a foreign one, according to the foreign country's regulations. It must be signed by the head of the Vehicle and Machinery Registration Service, then translated into the required language and authenticated at the Lebanese Ministry of Foreign Affairs to become effective.
The equired documents are copy of the driving license, a copy of the identity card, provision of the necessary financial stamps valued at 5000 LBP.
|
How to obtain a form for a public driving license to be submitted for social security? A form requested by the social security for beneficiaries of its services from the category of public drivers, to ensure they regularly renew their driving licenses.
The required documents are a request for a certificate from social security, a copy of the public driving license. a copy of the identity card. |
How to register previously inspected used imported cars? This service is for used cars imported from abroad, which were previously inspected by the Mechanical Department, and need to continue their registration process in the Registration Department.
The required documents are a customs certificate + Bill of Lading, identity document copies (seller and buyer) or civil status extract or passport, or their legal representatives with properly organized power of attorney, residence certificate from the local authority for the buyer, and mandatory insurance. The registration should be done where the inspection takes place.
Note that the presence of the seller and the buyer or their legal representatives with properly organized power of attorney is required to authenticate the sale deed at the service center.
|
How to register new imported cars (km0) that do not require inspection ? This service is for cars imported from abroad that have not been used outside. The customs certificate states "New passenger car." The required documents are a customs certificate + Bill of Lading, identity document copies (seller and buyer) or civil status extract or passport, or their legal representatives with properly organized power of attorney, residence certificate from the local authority for the buyer, and mandatory insurance. The registration should be done where the inspection takes place
|
How to register used Imported Cars that Must Be Brought in or Subject to Inspection at the Mechanical Department? It is the process of registering vehicles and machinery imported from abroad, which have been used outside. The phrase "Used Passenger Car" is noted on the customs certificate. This service is limited to cars that have not been previously registered in Lebanon.
The required documents are a customs certificate a bill of Lading, a copy of the identities (a copy of the seller's and buyer's ID) or a copy of the civil status extract or passport, or for their legal representatives according to a properly organized power of attorney, a residence certificate from the local authority for the buyer, and a mandatory insurance. Registration can happen at any department or branch of the service. Noting that the car must be brought in. The presence of the seller and the buyer is required to authenticate the sale deed at the service or by their legal representatives with a properly organized power of attorney.
|
How to suspend an operation (scrapping)? This is the process of stopping the operation of vehicles and machinery, after which they cannot be operated under any circumstances.The required documents are a driving license (vehicle booklet), an identity document or civil status extract or passport, a vehicle plates, a necessary stamp duties and an application for suspension of operation, signed by the owner.The suspension should happen according to the registration place. Noting that before beginning registration, the request must be recorded at the registration clerk's office, and plates surrendered. In case of loss of license and plates due to unforeseen circumstances, a report organized by the internal security forces must be attached.
|
How to pay the annual driving fees (mechanical)? This is the process of paying the annual fees due on each vehicle or machine. The required documents are a vehicle or machine driving license, and a mandatory insurance. These fees can be paid at all external centers approved by the authority, except in cases of delay in payment of annual fees for five years, where it is necessary to attend the service center to make the payment.
|
How to do a release procedure for vehicle mortgage? When a vehicle or machinery is mortgaged to a certain entity, and its owner settles his account with the mortgaging entity and obtains a mortgage release contract from it. The required documents are the mortgage release contract signed by the mortgaging entity (bank, institution, company, or individuals) for private tourism vehicles, a vehicle driving license (vehicle booklet), an identity document copy, and a mandatory insurance in case annual driving fees (mechanics) are due.The release can take place in the section or branch where the vehicle or machinery is registered.Noting that the mortgage release contract must be recorded at the registration clerk's office.
|
How to return the vehicle to service Under the Owner's Name? This is the process of putting a vehicle or machinery back into service by its owner, who had previously suspended its operation. The required documents are a scrapping certificate, a mandatory insurance, an identity card, civil status extract, or passport copy. and a request for reinstatement to service (Appendix No. 10). The proceduce should be done in the department or branch where the vehicle or machinery is registered.Noting that in this process, the vehicle or machinery is put back into service without the need for re-registration since the ownership remains the same.
|
How to obtain a replacement vehicle operation license? When the operation license of a vehicle or machinery is lost, the owner must organize a report with the internal security forces to prove the incident, then proceed to the Registration Department. The required Documents are a report organized by the internal security forces, an identity card copy, a mandatory insurance if annual operation fees (mechanical) are due, and an pplication for a replacement.The procedure should take place at the department or branch where the vehicle or machinery is registered.
|
How to release an Impounded Vehicle? When a vehicle is impounded (unregistered / unpaid mechanical fees) by the internal security forces, the owner must go to the service center to proceed with the release procedure.The required Documents for unregistered vehicles include a release request, customs certificate, Bill of Lading + invoice, patrol report + two copies of it, mandatory insurance, residence certificate from the local authority for the buyer, identity card of the seller and buyer or their civil status extract or passport and their personal attendance or a legal representative with power of attorney, and a sale deed (from the service center) certified by both the seller and buyer. After completing the process at the service center, the owner needs to go to the place where his vehicle or machinery is impounded, carrying the release request, a copy of the sale deed certified by the Registration Department, a financial receipt (registration fee), and the patrol report + a copy. And the required documents for unpaid mechanical fees include the operation license + a copy (vehicle booklet), mandatory insurance, patrol report + two copies, and the identity card or civil status extract or passport copy. After completing the process at the service center, the owner must proceed to the impound location with the release request, a financial receipt (mechanical fees), the patrol report + a copy, and a copy of the operation license.
The procedure should take place at the department or branch where the vehicle or machinery is registered.
|
How to obtain a Deed for a Unique Number Allocation or Replacement for a Lost One? This is the process of obtaining a legal document that proves ownership of a unique number, in case the owner of the vehicle or machinery decides to sell it or stop its operation (scrapping) and keep the unique number. In case of loss, a report must be organized with the internal security forces to prove the incident. The required documents for obtaining a deed for a unique number allocation include Application Appendix No. 2, a copy of the scrapping certificate for the plate number to be allocated, and an identity card or civil status extract or passport copy. The required documents for obtaining a replacement deed for a lost unique number are similar, including Application Appendix No. 2, a report organized by the internal security forces, and an identity card or civil status extract or passport copy. The procedure can exclusively take place at the Dekwaneh center.
|
How to transfer the ownership of a Plate with a Unique Number? It is possible to transfer the ownership of a plate with a unique number from one person to another or between a person and one of his ancestors or descendants. The required documents if it's from one person to another are a deed of allocation, an application Form No. 6 for transfer from one person to another, a sale contract organized by a notary public, and a copy of the identities of both parties, or a copy of the civil status extract or passport. The required documents if it's between a person and one of their ancestors or descendants are a deed of allocation, an application Form No. 7 for transfer between a person and one of their ancestors or descendants, an officially organized waiver by a notary public, a copy of the identities of both parties, or a copy of the civil status extract or passport, and an inheritance obtained in case of the seller's death. The procedure can be exclusively take place at the Dekwaneh center.
|
How to issue new Plates? This process involves replacing old plates with new ones.
The required Documents are an application for plate replacement, and the old plates.
The procedure can be exclusively take place at the Dekwaneh center.
|
How to transfer ownership of a Vehicle in Operation? This refers to the registration of a vehicle or machinery previously registered at the department in the name of a new owner. The required Documents are the operation license, sales deed, copies of IDs (seller's and buyer's ID) or civil status extract or passport, or for their legal representatives with an officially organized power of attorney, residence proof for the buyer, a valid mandatory insurance. The procedure can take place at the department or branch where the vehicle or machinery is registered. Noting that no inspection of the vehicle or machinery is required at the Mechanical Department.
|
How to transfer the ownership of a Vehicle that has been Suspended from Operation (Scrapping)? This refers to the registration of a vehicle or machinery previously registered at the department and has been suspended from operation as per a scrapping certificate, in the name of a new owner. The required Documents are a scrapping certificate, sales deed, copies of IDs (seller's and buyer's ID) or civil status extract or passport, or for their legal representatives with an officially organized power of attorney, a residence proof for the buyer, a valid mandatory insurance.
The procedure can take place at the department or branch where the vehicle or machinery is registered. Noting that an inspection of the vehicle or machinery is required at the Mechanical Department in the registered department or branch.
|
How to do inspection of Engine Replacements, Color Changes, Cabin Modifications, and Box Shapes? Any modifications to the vehicle's or machinery's structure or engine replacement must be inspected and registered at the department. No required Documents .The procedure can take place at the department or branch where the vehicle or machinery is registered.
Noting that the inspection takes place at the Mechanical Department in the registered department or branch.
|
How to get a certificate of Ownership Sequence for a Public Plate for Submission to Social Security? This is a record of the ownership sequence of the public plate from the date of issue to its last owner. The required Documents are a request from social security, a copy of the driving license (vehicle booklet), a copy of the identity card, civil status extract, or passport.
The procedure can be exclusively take place at the Dekwaneh center.
|
How to renew transport Licenses? The transport license is renewed annually by presenting a membership certificate, agricultural statement, industrial certificate, or certificate from the relevant authority, depending on the type of transport license. The equired Documents are the original transport license, a membership certificate from the Chamber of Commerce, industrial certificate, or statement from the Ministry of Agriculture (depending on the type of transport license), a copy of the driving license (vehicle booklet), a copy of the identity card, civil status extract, or passport, fiscal stamps worth 15000 LBP. Additionalm documents are required for specific cases. If it's student transport buses a statement of the number of students from the Ministry of Education and Higher Education is required. If it's buses transporting members of associations a continuity of association operation certificate from the Ministry of Interior and Municipalities and the association's notification of formation are required. buses designated for transporting employees in private companies and institutions a certificate from the Ministry of Labor confirming the registration and number of employees is required.The procedure can be exclusively take place at the Dekwaneh center. Noting that the presence of the owner or their representative or an employee of the company or institution is required. Necessary fiscal stamps must be secured.
|
How can you apply for a driving license replacement if you lose yours?
Upon losing your driving license, report the incident to the internal security forces. After their investigation, submit a copy of their report along with a copy of your identity document and a certified photo. For non-Lebanese, a valid residency must be shown. If your lost license was expired, additional documents including a medical certificate, a recent criminal record, a blood type card, and a formal application to the unit head in specified locations are required.
|
What are the necessary steps to get a new driving license if the original is lost?
In the event of losing your driving license, initiate a formal investigation by the internal security forces. Present a copy of the investigation report, an identity document, and a certified photo for a replacement. Non-Lebanese need to show valid residency. If the license was expired, also provide a medical certificate, criminal record, blood type card, and an application to the unit head at designated locations.
|
What procedure should be followed to replace a lost driving license?
Should you lose your driving license, have it investigated by the internal security forces. Following their report, provide this along with your identity document and a certified photograph. Non-citizens must provide evidence of residency. For expired licenses, include a medical certificate, criminal record, blood type card, and an application addressed to the local unit head.
|
How do you secure a replacement for a missing driving license?
If your driving license goes missing, procure a report from the internal security forces following their investigation. Submit this report, an identity document, and a certified photograph for a replacement. Non-Lebanese individuals must also present valid residency. Include additional documents for expired licenses such as a medical certificate, criminal record, blood type card, and a formal application to specific units.
|
What is the process to obtain a replacement for a lost driving license?
Report your lost driving license to the internal security forces for investigation. After receiving their report, submit it along with an identity document and a certified photo. For non-Lebanese, valid residency is required. For expired licenses, also submit a medical certificate, criminal record, blood type card, and an application to the unit head at certain locations.
|
How can active duty service members replace a military driving license with a civilian one?
Service members on active duty should submit the appropriate form (No. 2 for Army, General Security, State Security or No. 1 for Internal Security Forces), alongside a military ID. Include the military license, a statement from your corps, any existing civilian license, two passport-size photos, and a medical document showing your blood type.
|
What steps must active duty military personnel take to convert their military driving license to a civilian format?
Active duty personnel need to provide Form No. 2 or No. 1, depending on their service branch, with a military ID at the time of application. The process includes submitting the military license and a copy, a detailed statement from the corps, the civilian license if one exists, two certified photos, and a medical certificate indicating blood type.
|
How can service members on active duty obtain a civilian driving license based on their military credentials?
Active duty members must fill out Form No. 2 or No. 1 with their military ID, present their military driving license and a copy, a corps-issued statement listing obtained categories, their civilian driving license if available, two passport-size photos, and a medical certificate of blood type.
|
What is required for a service member to transition their military driving license into a civilian one while on active duty?
Submit Form No. 2 or No. 1, based on your branch, and show your military ID. Necessary documents include your military driving license and a copy, a statement from your corps on obtained categories, your current civilian driving license, two passport-size photos, and a blood type medical certificate.
|
How do active duty service members apply for a civilian driving license using their military license?
Service members must complete Form No. 2 or No. 1 and present a military ID during application. Required materials include the military driving license, a copy, a corps statement on category qualifications, any existing civilian driving license, two certified photos, and a medical document detailing blood type.
|
How can you secure a certificate to convert a Lebanese driving license into a foreign driving license?
To convert a Lebanese driving license into a foreign one, obtain a specific form from the Vehicle and Machinery Registration Service, signed by its head. This document must be translated into the relevant language and authenticated by the Lebanese Ministry of Foreign Affairs. Required documents include a copy of the driving license, a copy of the identity card, and financial stamps worth 5000 LBP.
|
What is the process to get a form for exchanging a Lebanese driving license abroad?
For exchanging a Lebanese driving license for a foreign one, collect the necessary form from the Vehicle and Machinery Registration Service, ensuring it's signed by the head. Translate the form as needed and get it authenticated at the Lebanese Ministry of Foreign Affairs. Bring a copy of your driving license, your identity card, and 5000 LBP in financial stamps.
|
How do you obtain a certificate for converting your Lebanese driving license to use internationally?
Acquire a certificate by requesting a specific form from the head of the Vehicle and Machinery Registration Service. After obtaining the form, translate it into the required language and authenticate it through the Lebanese Ministry of Foreign Affairs. You must provide a copy of your driving license, identity card, and financial stamps valued at 5000 LBP.
|
What steps are required to prepare a Lebanese driving license for international exchange?
Begin by getting a form from the Vehicle and Machinery Registration Service, which needs to be signed by its head. Translate this form to the appropriate language and have it authenticated at the Lebanese Ministry of Foreign Affairs. You should have on hand a copy of your driving license, identity card, and financial stamps totaling 5000 LBP.
|
How to process a Lebanese driving license for exchange with a foreign license?
Request the necessary form from the Vehicle and Machinery Registration Service, making sure it is signed by the head of the service. This form must be translated into the necessary language and authenticated at the Lebanese Ministry of Foreign Affairs for it to be valid. Essential documents include a copy of the driving license, identity card, and financial stamps valued at 5000 LBP
|
How to acquire a social security form for public driving license renewal?
To obtain a social security form for public drivers, request a certificate from social security that verifies regular license renewal. Required documents include a copy of the public driving license and a copy of the identity card.
|
What is the procedure to get a form for public driving license submission to social security?
Public drivers needing to submit their license details to social security must request a specific form intended to confirm their regular license renewals. This requires providing a copy of the public driving license and the driver’s identity card.
|
How do public drivers obtain a form for submitting their driving license to social security?
Public drivers should request a form from social security that helps verify their license renewal status. They will need to submit a copy of their public driving license along with their identity card.
|
What steps must public drivers take to secure a social security form for driving license verification?
Public drivers must request a social security certificate form to ensure they are recognized for regular license renewals. They should provide a copy of their public driving license and identity card.
|
How can public drivers apply for a social security form to affirm their driving license status?
To apply, public drivers need to request a form from social security designed to confirm that their driving licenses are regularly renewed. The form requires a copy of the public driving license and a copy of the identity card.
|
What is the process to register an inspected used imported car?
For registering used imported cars that have already been inspected by the Mechanical Department, continue the process at the Registration Department. Required documents include a customs certificate, Bill of Lading, copies of identity documents (for both seller and buyer or their legal representatives with power of attorney), a residence certificate for the buyer, and mandatory insurance. Registration must be completed at the location of inspection. Both seller and buyer or their representatives must be present to authenticate the sale deed
|
How can one complete the registration of a used imported car that has been pre-inspected?
To finalize the registration of a used imported car previously inspected, gather the necessary documents—customs certificate, Bill of Lading, identity documents of the seller and buyer or their legal representatives, buyer's residence certificate, and mandatory insurance. Proceed to the Registration Department where the initial inspection occurred. It’s essential that both the seller and buyer or their legal representatives are present to authenticate the sale deed.
|
What steps are involved in registering a used imported car after it has been inspected?
Begin by collecting the required documents such as the customs certificate, Bill of Lading, copies of identity documents (seller and buyer or their legal representatives), residence certificate of the buyer, and mandatory insurance. Head to the Registration Department where the inspection was done. The presence of both the seller and buyer or their legal representatives is required to validate the sale deed.
|
How do you register an imported used car that has passed a prior inspection?
Used imported cars that have undergone prior inspection need to be registered at the Registration Department. Ensure you have a customs certificate, Bill of Lading, identity document copies, residence certificate of the buyer, and mandatory insurance. Registration must take place where the car was inspected. Both the seller and the buyer or their representatives must authenticate the sale deed at the registration.
|
What are the requirements for registering a used imported car that has been pre-inspected by the Mechanical Department?
To register a used imported car, you need a customs certificate, Bill of Lading, copies of identity documents for both parties or their representatives with power of attorney, a local authority residence certificate for the buyer, and mandatory insurance. Complete the registration at the location of the initial inspection. Both parties or their representatives must be present for the sale deed authentication.
|
How to register a new imported car that does not require mechanical inspection?
New imported cars marked as "New Passenger Car" on the customs certificate do not require mechanical inspection. To register, provide a customs certificate, shipping documents, copies of identity documents for both the seller and buyer or a copy of their civil status extract or passport, a local authority residence certificate for the buyer, and mandatory insurance. Registration can be completed at any department or branch
|
What is the procedure for registering a new imported car without needing inspection?
To register a new imported car that hasn’t been used outside and is free from inspection requirements, gather the customs certificate labeled "New Passenger Car," shipping documents, identity document copies for both seller and buyer, buyer's residence certificate, and mandatory insurance. You can register this vehicle at any service department or branch.
|
How do you register an imported new car that does not need to be checked by the Mechanical Department?
For cars imported as new and not previously used (marked on the customs certificate), registration is straightforward without the need for inspection. Submit the customs certificate, shipping documents, copies of identity documents, a residence certificate for the buyer, and ensure you have mandatory insurance. Registration is possible at any service branch
|
What steps must be taken to register a new car imported from abroad that does not require inspection?
Register a new imported car by providing a customs certificate with "New Passenger Car," shipping documents, copies of identity documents, a residence certificate, and mandatory insurance. This type of car does not require mechanical inspection and can be registered at any department or service branch.
|
How can you register a new 'km0' imported car that bypasses mechanical checks?
New 'km0' imported cars, identified by the phrase "New Passenger Car" on the customs certificate and requiring no mechanical checks, need the following for registration: customs certificate, shipping documents, identity documents of both parties, a residence certificate for the buyer, and mandatory insurance. This registration can occur at any relevant department or branch.
|
What is the registration process for used imported cars requiring inspection?
To register a used imported car that needs inspection, gather the following documents: a customs certificate noting "Used Passenger Car," a Bill of Lading, copies of identity documents (seller's and buyer's IDs or their legal representatives with power of attorney), a residence certificate from the buyer's local authority, and mandatory insurance. The car must be presented for inspection, and both the seller and buyer must be present or represented legally to authenticate the sale deed. Registration can be done at any service department or branch.
|
How do you register an imported used car that must undergo mechanical inspection?
For registration of a used imported car subject to mechanical inspection, provide a customs certificate, a Bill of Lading, identity documents or legal representatives' documents with a power of attorney, a local authority residence certificate for the buyer, and mandatory insurance. The car needs to be brought in for inspection, and the presence of both the seller and buyer or their representatives is required to validate the sale deed at any registration department or branch.
|
What steps must be followed to register a used imported car that is subject to inspection?
Begin by collecting required documents including the customs certificate labeled "Used Passenger Car," a Bill of Lading, identity document copies, a residence certificate, and mandatory insurance. The car must be physically present for inspection. Ensure that both the seller and buyer, or their authorized representatives, are present to authenticate the sale deed. Registration is possible at any branch of the service.
|
How to proceed with registering a used imported car that requires mechanical department inspection?
To register a used imported car requiring inspection, ensure you have a customs certificate with "Used Passenger Car" noted, a Bill of Lading, copies of identity documents, a residence certificate, and mandatory insurance. The vehicle must be inspected in person, and the sale deed must be authenticated by the presence of the seller and buyer or their legal representatives at any service department
|
What documents are needed to register a used imported car that must be inspected?
For the registration of a used imported car that requires inspection, submit a customs certificate marked "Used Passenger Car," a Bill of Lading, identity documents, a local authority residence certificate for the buyer, and mandatory insurance. The car should be brought to any department for inspection, and the authentication of the sale deed must involve the seller and buyer or their legal representatives.
|
How do you suspend the operation of a vehicle or machinery (scrapping)?
To suspend a vehicle’s operation, submit the following: the vehicle's driving license, identity document, vehicle plates, necessary stamp duties, and a signed application for suspension. The suspension process must be carried out at the registration place where the vehicle is registered, with the plates surrendered at the registration clerk’s office before starting. If the license and plates are lost, attach a report from the internal security forces.
|
What is the procedure for scrapping a vehicle or machinery?
Scrapping involves stopping the operation of a vehicle permanently. Required documents include the vehicle's driving license, an identity document, vehicle plates, stamp duties, and a signed suspension application. This must be done at the original registration location. Record the request and surrender the plates at the registration clerk’s office. Include a police report if the license and plates are lost.
|
How to formally scrap a vehicle or machinery?
To formally scrap a vehicle, present the driving license, an identity document, vehicle plates, stamp duties, and a completed suspension application at the place of registration. The vehicle’s plates must be surrendered at the registration clerk's office before the process begins. If there’s a loss of the license or plates, provide a report from the internal security forces.
|
What are the steps to suspend the operation of a vehicle (scrapping)?
For vehicle scrapping, provide the vehicle’s driving license, an identity document, plates, and necessary stamp duties along with a signed suspension application. The process should be initiated at the vehicle's registration office where the plates must be surrendered. In case of loss of license and plates, include a police report.
|
How can one initiate the scrapping process for a vehicle or machinery?
To initiate scrapping, submit the vehicle’s driving license, an identity document, the vehicle plates, necessary stamp duties, and an application signed by the owner at the registration office. Ensure to record the scrapping request and surrender the vehicle plates
|
How do you pay the annual mechanical fees for a vehicle?
To pay the annual mechanical fees for your vehicle or machinery, you must have the vehicle’s driving license and mandatory insurance. These fees are payable at all authorized external centers. If there is a delay in payment for five years, you must visit a service center in person to make the payment.
|
What is the process for paying annual driving fees for vehicles?
Annual driving fees can be paid by providing the vehicle or machine's driving license and proof of mandatory insurance at any approved external center. If the fees have been unpaid for five years, payment must be made in person at the service center.
|
How to handle the payment of annual mechanical fees for a vehicle?
Paying the annual mechanical fees requires the vehicle’s driving license and valid mandatory insurance. Payments can be made at designated external centers. However, if the payment has been delayed for over five years, it is necessary to attend the service center directly to settle the fees
|
What steps are involved in paying the annual fees for vehicle maintenance?
To pay the annual vehicle maintenance fees, you need to have the vehicle's driving license and mandatory insurance ready. These fees can be settled at any authorized external payment center. For delays exceeding five years in fee payment, a visit to the service center is required.
|
How do you settle the annual mechanical fees for your vehicle?
Settling the annual mechanical fees involves presenting the driving license of the vehicle or machinery along with mandatory insurance. Payment can be made at any approved external center, but if there is a delay of five years, you need to go to the service center to pay.
|
How to complete the vehicle mortgage release procedure?
To release a vehicle or machinery from a mortgage, secure a mortgage release contract from the mortgaging entity (such as a bank or institution). You will need this contract, the vehicle’s driving license, an identity document copy, and mandatory insurance if annual fees are due. The release must be recorded at the registration clerk’s office in the section or branch where the vehicle is registered.
|
What is the process for releasing a mortgage on a vehicle?
If a vehicle is mortgaged, obtain a mortgage release contract from the lender after settling the account. Required documents for the release include the contract, vehicle driving license, a copy of an identity document, and mandatory insurance if applicable. Record the release at the registration clerk's office where the vehicle is registered.
|
How do you perform a mortgage release for a vehicle or machinery?
To perform a mortgage release, first acquire a signed mortgage release contract from your mortgaging entity. Along with this contract, present the vehicle’s driving license, an identity document copy, and ensure any due annual driving fees are paid. The release procedure must be conducted at the registration branch where the vehicle is registered, and the contract must be recorded.
|
What steps must be taken to release a vehicle from its mortgage?
For releasing a vehicle from a mortgage, secure a mortgage release contract from the financing entity, and gather the vehicle’s driving license, a copy of an identity document, and mandatory insurance. The mortgage release must be processed and recorded at the vehicle registration office where it is registered.
|
How to execute a mortgage release on a vehicle?
Obtain a mortgage release contract from the entity holding the mortgage after settling your dues. Required documents include this contract, the vehicle's driving license, an identity document copy, and mandatory insurance if the annual driving fees are due. The release should take place in the registration section or branch of the vehicle, and the contract needs to be officially recorded at the registration clerk’s office.
|
How do you replace a lost vehicle operation license?
If the operation license of a vehicle or machinery is lost, report the loss to the internal security forces and obtain a report. Required documents for replacement include this report, a copy of your identity card, mandatory insurance if annual operation fees are due, and a replacement application. The replacement procedure must be carried out at the registration department or branch where the vehicle is registered.
|
What is the process for replacing a lost operation license for a vehicle or machinery?
Begin by filing a loss report with the internal security forces to document the incident. To apply for a replacement license, present the loss report, a copy of your identity card, mandatory insurance if applicable, and complete a replacement application form. This must be done at the department or branch where the vehicle or machinery is originally registered.
|
How to obtain a new operation license if the original is lost?
First, file a report with the internal security forces confirming the loss of your vehicle or machinery’s operation license. Then, proceed to the registration department with the report, an identity card copy, mandatory insurance if the mechanical fees are due, and an application for a replacement. The process should be completed at the same branch where the vehicle is registered.
|
Steps to replace a lost vehicle operation license?
Report the loss to the internal security forces and obtain an official report. With this report, go to the registration department and provide a copy of your identity card, mandatory insurance if necessary, and fill out a replacement application. Ensure this is done at the branch where the vehicle or machinery was initially registered.
|
Procedure for acquiring a replacement operation license after loss?
Secure a loss report from the internal security forces and bring this report to the registration department where your vehicle is registered. Along with the report, submit your identity card copy, mandatory insurance if applicable, and a replacement application form to obtain a new operation license.
|
How to release an impounded vehicle?
To release an impounded vehicle, first visit the service center to initiate the release procedure with the necessary documents, including a release request, customs certificate, Bill of Lading + invoice, patrol report and copies, mandatory insurance, residence certificate, identity documents of the seller and buyer, and a certified sale deed. After completing these formalities, proceed to the impound site with the release request, a copy of the certified sale deed, a financial receipt for the registration fee, and the patrol report and a copy.
|
What steps must be taken to retrieve a vehicle from impoundment?
Start by going to the service center with the required documents for the impoundment reason (unregistered or unpaid fees). These include a release request, customs documentation, patrol reports, mandatory insurance, and relevant identity documents. After handling these procedures, visit the impound location with appropriate documentation such as the release request, financial receipts, and additional copies of the patrol report.
|
How do you proceed with releasing a vehicle that has been impounded by internal security?
Visit the service center armed with documents like the release request, customs certificate, detailed invoice, patrol report, mandatory insurance, residence and identity verification documents, and a certified sale deed. After processing these at the service center, you need to carry the release request, sale deed, registration fee receipt, and patrol report to the impound location to retrieve your vehicle.
|
Procedure for retrieving an impounded vehicle due to registration or mechanical fee issues?
To release your impounded vehicle, gather documents including a release request, customs certificate, invoice, patrol report, mandatory insurance, identity and residence documents, and a certified sale deed. Complete initial formalities at the service center, then head to the impound location with a release request, a copy of the sale deed, registration fee receipt, and the patrol report.
|
How can an owner recover an impounded vehicle from the authorities?
To recover an impounded vehicle, present the required documents at the service center, including a release request, customs and shipping documents, patrol report, mandatory insurance, and identification papers. After processing at the service center, visit the impound location with necessary documents like the release request, financial receipts for fees paid, and copies of the patrol report to finalize the release.
|
What is the procedure to reactivate a vehicle or machinery under the same ownership?
To reactivate a vehicle or machinery that was previously suspended, you'll need the scrapping certificate, mandatory insurance, an identity document such as an ID card, civil status extract, or passport, along with a reinstatement request (Appendix No. 10). This process must be completed at the department or branch where the vehicle is registered, and no re-registration is required as the ownership remains unchanged.
|
How do you put a vehicle back into service under the original owner’s name?
Reactivating a vehicle or machinery involves submitting a scrapping certificate, proof of mandatory insurance, and an identity document. Additionally, fill out the request for reinstatement to service (Appendix No. 10). Carry out this procedure at the registration branch where the vehicle is registered, noting that this process will reactivate the vehicle without needing to change its registration since the owner remains the same.
|
Steps to reinstate a previously suspended vehicle under the owner's name?
To reinstate a vehicle or machinery, provide a scrapping certificate, mandatory insurance, an identity document, and complete Appendix No. 10 for service reinstatement. This should be done at the same department or branch where the vehicle was originally registered, as the vehicle will be put back into service while retaining the same ownership, thus avoiding re-registration.
|
How to resume service of a vehicle under the owner’s name after suspension?
If you wish to resume service of a vehicle or machinery under the original owner's name, submit the following: a scrapping certificate, mandatory insurance, an identity document, and a reinstatement request (Appendix No. 10). This process is conducted at the registration branch where it was initially registered, allowing the vehicle to return to service without re-registration
|
Procedure for reactivating a vehicle under the same ownership?
Reactivate your vehicle or machinery by providing a scrapping certificate, mandatory insurance, an identity document, and filling out the reinstatement request (Appendix No. 10). Complete this procedure at the department or branch of initial registration, ensuring that ownership remains unchanged and re-registration is unnecessary.
|
What are the steps to obtain a deed for a unique number allocation or replace a lost one?
To secure a deed for a unique number allocation or replace a lost one, submit Application Appendix No. 2, a scrapping certificate (for number allocation), and an identity document at the Dekwaneh center. In cases of loss, include a report from the internal security forces documenting the incident.
|
How do you secure a legal deed for owning a unique vehicle number or replacing a lost deed?
For obtaining a deed for a unique number, or replacing one that's lost, fill out Application Appendix No. 2, provide a scrapping certificate for the plate number, and an identity document at the Dekwaneh center. Add a report from the internal security forces if the deed was lost.
|
Procedure to obtain or replace a deed for a unique vehicle number?
Apply for a deed for a unique vehicle number or its replacement at the Dekwaneh center using Application Appendix No. 2. Include a copy of the scrapping certificate and an identity document. For replacements due to loss, attach a report from the internal security forces.
|
Steps for acquiring a deed for a unique number allocation or its replacement?
To obtain or replace a deed for a unique number, go to the Dekwaneh center with Application Appendix No. 2, a scrapping certificate for allocation, and an identity document. If replacing a lost deed, include a security forces report verifying the incident.
|
How to process a deed for a unique vehicle number or replace a lost deed?
Obtain a deed for a unique vehicle number or replace a lost one by submitting Application Appendix No. 2, a scrapping certificate (for number allocation), and an identity document at the Dekwaneh center. For lost deeds, a report from the internal security forces is necessary.
|
What is the procedure to replace old vehicle plates with new ones?
To replace old vehicle plates with new ones, you must submit an application for plate replacement along with the old plates. This process must be carried out exclusively at the Dekwaneh center.
|
How do you obtain new plates for your vehicle?
For obtaining new vehicle plates, provide the required application for plate replacement and surrender the old plates. This must be done at the Dekwaneh center, which exclusively handles such replacements.
|
Steps to replace vehicle plates with new ones? To replace your vehicle's plates, fill out an application for plate replacement and bring the old plates to the Dekwaneh center, where this procedure is exclusively performed.
|
How to apply for new vehicle plates at the Dekwaneh center?
Apply for new vehicle plates by submitting a plate replacement application and the old plates at the Dekwaneh center, the only location authorized for this process.
|
Procedure for issuing new plates for a vehicle?
The process of issuing new plates involves submitting a replacement application along with the old plates. This is exclusively conducted at the Dekwaneh center.
|
What are the steps to transfer ownership of an operational vehicle?
To transfer ownership of a vehicle, you'll need the operation license, sales deed, copies of IDs (seller's and buyer's) or civil status extract or passport, residence proof for the buyer, and valid mandatory insurance. The procedure can be completed at the department or branch where the vehicle or machinery is registered, with no need for a mechanical inspection.
|
How do you register a vehicle under a new owner’s name?
Registering a vehicle in the name of a new owner requires presenting the operation license, sales deed, identity documents of both parties or their legal representatives with power of attorney, proof of buyer’s residence, and mandatory insurance. This can be done at the original registration department or branch without the need for inspection.
|
Steps for transferring vehicle ownership at the registration department?
To transfer vehicle ownership, submit the operation license, a sales deed, identity documentation for both parties, buyer’s residence proof, and valid insurance. Perform this transaction at the vehicle’s registered department or branch, where no mechanical inspection is necessary.
|
How to conduct a vehicle ownership transfer without inspection?
Transfer ownership by providing the operation license, sales deed, ID copies or legal equivalents, buyer’s residence proof, and insurance at the registration department. This procedure does not require an inspection at the Mechanical Department.
|