creation_sourcecode: {{
    "language": "Solidity",
    "sources": {
      "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable\n    struct OwnableStorage {\n        address _owner;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Ownable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;\n\n    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {\n        assembly {\n            $.slot := OwnableStorageLocation\n        }\n    }\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    function __Ownable_init(address initialOwner) internal onlyInitializing {\n        __Ownable_init_unchained(initialOwner);\n    }\n\n    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        OwnableStorage storage $ = _getOwnableStorage();\n        return $._owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        OwnableStorage storage $ = _getOwnableStorage();\n        address oldOwner = $._owner;\n        $._owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"
      },
      "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Storage of the initializable contract.\n     *\n     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions\n     * when using with upgradeable contracts.\n     *\n     * @custom:storage-location erc7201:openzeppelin.storage.Initializable\n     */\n    struct InitializableStorage {\n        /**\n         * @dev Indicates that the contract has been initialized.\n         */\n        uint64 _initialized;\n        /**\n         * @dev Indicates that the contract is in the process of being initialized.\n         */\n        bool _initializing;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Initializable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;\n\n    /**\n     * @dev The contract is already initialized.\n     */\n    error InvalidInitialization();\n\n    /**\n     * @dev The contract is not initializing.\n     */\n    error NotInitializing();\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint64 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any\n     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in\n     * production.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        // Cache values to avoid duplicated sloads\n        bool isTopLevelCall = !$._initializing;\n        uint64 initialized = $._initialized;\n\n        // Allowed calls:\n        // - initialSetup: the contract is not in the initializing state and no previous version was\n        //                 initialized\n        // - construction: the contract is initialized at version 1 (no reininitialization) and the\n        //                 current contract is just being deployed\n        bool initialSetup = initialized == 0 && isTopLevelCall;\n        bool construction = initialized == 1 && address(this).code.length == 0;\n\n        if (!initialSetup && !construction) {\n            revert InvalidInitialization();\n        }\n        $._initialized = 1;\n        if (isTopLevelCall) {\n            $._initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            $._initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint64 version) {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing || $._initialized >= version) {\n            revert InvalidInitialization();\n        }\n        $._initialized = version;\n        $._initializing = true;\n        _;\n        $._initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        _checkInitializing();\n        _;\n    }\n\n    /**\n     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.\n     */\n    function _checkInitializing() internal view virtual {\n        if (!_isInitializing()) {\n            revert NotInitializing();\n        }\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing) {\n            revert InvalidInitialization();\n        }\n        if ($._initialized != type(uint64).max) {\n            $._initialized = type(uint64).max;\n            emit Initialized(type(uint64).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint64) {\n        return _getInitializableStorage()._initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _getInitializableStorage()._initializing;\n    }\n\n    /**\n     * @dev Returns a pointer to the storage namespace.\n     */\n    // solhint-disable-next-line var-name-mixedcase\n    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {\n        assembly {\n            $.slot := INITIALIZABLE_STORAGE\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC1822Proxiable} from \"@openzeppelin/contracts/interfaces/draft-IERC1822.sol\";\nimport {ERC1967Utils} from \"@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol\";\nimport {Initializable} from \"./Initializable.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n */\nabstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address private immutable __self = address(this);\n\n    /**\n     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`\n     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,\n     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.\n     * If the getter returns `\"5.0.0\"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must\n     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function\n     * during an upgrade.\n     */\n    string public constant UPGRADE_INTERFACE_VERSION = \"5.0.0\";\n\n    /**\n     * @dev The call is from an unauthorized context.\n     */\n    error UUPSUnauthorizedCallContext();\n\n    /**\n     * @dev The storage `slot` is unsupported as a UUID.\n     */\n    error UUPSUnsupportedProxiableUUID(bytes32 slot);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        _checkProxy();\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        _checkNotDelegated();\n        _;\n    }\n\n    function __UUPSUpgradeable_init() internal onlyInitializing {\n    }\n\n    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view virtual notDelegated returns (bytes32) {\n        return ERC1967Utils.IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data);\n    }\n\n    /**\n     * @dev Reverts if the execution is not performed via delegatecall or the execution\n     * context is not of a proxy with an ERC1967-compliant implementation pointing to self.\n     * See {_onlyProxy}.\n     */\n    function _checkProxy() internal view virtual {\n        if (\n            address(this) == __self || // Must be called through delegatecall\n            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy\n        ) {\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Reverts if the execution is performed via delegatecall.\n     * See {notDelegated}.\n     */\n    function _checkNotDelegated() internal view virtual {\n        if (address(this) != __self) {\n            // Must not be called through delegatecall\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.\n     *\n     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value\n     * is expected to be the implementation slot in ERC1967.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {\n        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {\n                revert UUPSUnsupportedProxiableUUID(slot);\n            }\n            ERC1967Utils.upgradeToAndCall(newImplementation, data);\n        } catch {\n            // The implementation is not UUPS\n            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC721} from \"@openzeppelin/contracts/token/ERC721/IERC721.sol\";\nimport {IERC721Receiver} from \"@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\";\nimport {IERC721Metadata} from \"@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\";\nimport {ContextUpgradeable} from \"../../utils/ContextUpgradeable.sol\";\nimport {Strings} from \"@openzeppelin/contracts/utils/Strings.sol\";\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {ERC165Upgradeable} from \"../../utils/introspection/ERC165Upgradeable.sol\";\nimport {IERC721Errors} from \"@openzeppelin/contracts/interfaces/draft-IERC6093.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.ERC721\n    struct ERC721Storage {\n        // Token name\n        string _name;\n\n        // Token symbol\n        string _symbol;\n\n        mapping(uint256 tokenId => address) _owners;\n\n        mapping(address owner => uint256) _balances;\n\n        mapping(uint256 tokenId => address) _tokenApprovals;\n\n        mapping(address owner => mapping(address operator => bool)) _operatorApprovals;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC721\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant ERC721StorageLocation = 0x80bb2b638cc20bc4d0a60d66940f3ab4a00c1d7b313497ca82fb0b4ab0079300;\n\n    function _getERC721Storage() private pure returns (ERC721Storage storage $) {\n        assembly {\n            $.slot := ERC721StorageLocation\n        }\n    }\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {\n        __ERC721_init_unchained(name_, symbol_);\n    }\n\n    function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n        ERC721Storage storage $ = _getERC721Storage();\n        $._name = name_;\n        $._symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        ERC721Storage storage $ = _getERC721Storage();\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return $._balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        ERC721Storage storage $ = _getERC721Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        ERC721Storage storage $ = _getERC721Storage();\n        return $._symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        ERC721Storage storage $ = _getERC721Storage();\n        return $._operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        ERC721Storage storage $ = _getERC721Storage();\n        return $._owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        ERC721Storage storage $ = _getERC721Storage();\n        return $._tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        ERC721Storage storage $ = _getERC721Storage();\n        unchecked {\n            $._balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        ERC721Storage storage $ = _getERC721Storage();\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                $._balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                $._balances[to] += 1;\n            }\n        }\n\n        $._owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        ERC721Storage storage $ = _getERC721Storage();\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        $._tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        ERC721Storage storage $ = _getERC721Storage();\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        $._operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"
      },
      "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165 {\n    function __ERC165_init() internal onlyInitializing {\n    }\n\n    function __ERC165_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"
      },
      "@openzeppelin/contracts/interfaces/draft-IERC1822.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"
      },
      "@openzeppelin/contracts/interfaces/draft-IERC6093.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"
      },
      "@openzeppelin/contracts/proxy/beacon/IBeacon.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {UpgradeableBeacon} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"
      },
      "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Utils.sol)\n\npragma solidity ^0.8.20;\n\nimport {IBeacon} from \"../beacon/IBeacon.sol\";\nimport {Address} from \"../../utils/Address.sol\";\nimport {StorageSlot} from \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n */\nlibrary ERC1967Utils {\n    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.\n    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev The `implementation` of the proxy is invalid.\n     */\n    error ERC1967InvalidImplementation(address implementation);\n\n    /**\n     * @dev The `admin` of the proxy is invalid.\n     */\n    error ERC1967InvalidAdmin(address admin);\n\n    /**\n     * @dev The `beacon` of the proxy is invalid.\n     */\n    error ERC1967InvalidBeacon(address beacon);\n\n    /**\n     * @dev An upgrade function sees `msg.value > 0` that may be lost.\n     */\n    error ERC1967NonPayable();\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        if (newImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(newImplementation);\n        }\n        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Performs implementation upgrade with additional setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) internal {\n        _setImplementation(newImplementation);\n        emit Upgraded(newImplementation);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(newImplementation, data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function getAdmin() internal view returns (address) {\n        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        if (newAdmin == address(0)) {\n            revert ERC1967InvalidAdmin(address(0));\n        }\n        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {IERC1967-AdminChanged} event.\n     */\n    function changeAdmin(address newAdmin) internal {\n        emit AdminChanged(getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is the keccak-256 hash of \"eip1967.proxy.beacon\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        if (newBeacon.code.length == 0) {\n            revert ERC1967InvalidBeacon(newBeacon);\n        }\n\n        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;\n\n        address beaconImplementation = IBeacon(newBeacon).implementation();\n        if (beaconImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(beaconImplementation);\n        }\n    }\n\n    /**\n     * @dev Change the beacon and trigger a setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-BeaconUpgraded} event.\n     *\n     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since\n     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for\n     * efficiency.\n     */\n    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {\n        _setBeacon(newBeacon);\n        emit BeaconUpgraded(newBeacon);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract\n     * if an upgrade doesn't perform an initialization call.\n     */\n    function _checkNonPayable() private {\n        if (msg.value > 0) {\n            revert ERC1967NonPayable();\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC721} from \"../IERC721.sol\";\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n"
      },
      "@openzeppelin/contracts/token/ERC721/IERC721.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"
      },
      "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n"
      },
      "@openzeppelin/contracts/utils/Address.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error AddressInsufficientBalance(address account);\n\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedInnerCall();\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert AddressInsufficientBalance(address(this));\n        }\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        if (!success) {\n            revert FailedInnerCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {FailedInnerCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert AddressInsufficientBalance(address(this));\n        }\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an\n     * unsuccessful call.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            // only check if target is a contract if the call was successful and the return data is empty\n            // otherwise we already know that it was a contract\n            if (returndata.length == 0 && target.code.length == 0) {\n                revert AddressEmptyCode(target);\n            }\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {FailedInnerCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.\n     */\n    function _revert(bytes memory returndata) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert FailedInnerCall();\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts/utils/introspection/IERC165.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
      },
      "@openzeppelin/contracts/utils/math/Math.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n"
      },
      "@openzeppelin/contracts/utils/math/SignedMath.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts/utils/StorageSlot.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n}\n"
      },
      "@openzeppelin/contracts/utils/Strings.sol": {
        "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\npragma solidity ^0.8.20;\n\nimport {Math} from \"./math/Math.sol\";\nimport {SignedMath} from \"./math/SignedMath.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n"
      },
      "contracts/HotelOwnerNFT.sol": {
        "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport \"@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\n\ncontract HotelOwnerNFT is\n    Initializable,\n    ERC721Upgradeable,\n    OwnableUpgradeable,\n    UUPSUpgradeable\n{\n    address public recipient;\n    address public minter;\n    uint256 public issueLimit;\n    uint256 public priceLimit;\n\n    string private nlcBaseURI;\n    uint256 private nextTokenId;\n\n    event TokenMinted(\n        bytes transactionId,\n        address to,\n        uint256 tokenId,\n        address recipient,\n        uint256 price\n    );\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor()\n    {\n        _disableInitializers();\n    }\n\n    function initialize(\n        address _recipient,\n        address _minter\n    ) public initializer {\n        __ERC721_init(\"BoostWL7\", \"NLC-WL7\");\n        __Ownable_init(msg.sender);\n        __UUPSUpgradeable_init();\n        recipient = _recipient;\n        minter = _minter;\n        issueLimit = 25;\n        priceLimit = 0;\n    }\n\n    modifier onlyMinter() {\n        require(\n            msg.sender == minter,\n            \"NLC: Caller must be minter\"\n        );\n        _;\n    }\n\n    function _authorizeUpgrade(\n        address newImplementation\n    ) internal override onlyOwner {}\n\n    function _baseURI() internal view virtual override returns (string memory) {\n        return nlcBaseURI;\n    }\n\n    function setBaseURI(string memory _nlcBaseURI) public onlyOwner {\n        nlcBaseURI = _nlcBaseURI;\n    }\n\n    function updateIssueLimit(uint256 _issueLimit) public onlyOwner {\n        require(\n            nextTokenId <= _issueLimit,\n            \"NLC: New limit must be more than the existing tokens.\"\n        );\n        issueLimit = _issueLimit;\n    }\n\n    function updatePriceLimit(uint256 _priceLimit) public onlyOwner {\n        priceLimit = _priceLimit;\n    }\n\n    function updateRecipient(address _recipient) public onlyOwner {\n        require(\n            recipient != _recipient,\n            \"NLC: New recipient must be different\"\n        );\n        recipient = _recipient;\n    }\n\n    function updateMinter(address _minter) public onlyOwner {\n        require(\n            minter != _minter,\n            \"NLC: New minter must be different\"\n        );\n        minter = _minter;\n    }\n\n    function mintWithOwner(\n        bytes calldata transactionId,\n        address to\n    ) public onlyOwner {\n        uint256 tokenId = nextTokenId + 1;\n        require(\n            tokenId <= issueLimit,\n            \"NLC: Issue limit has been reached\"\n        );\n        nextTokenId = tokenId;\n        _safeMint(to, tokenId);\n        emit TokenMinted(transactionId, to, tokenId, recipient, 0);\n    }\n\n    function mintWithPiement(\n        bytes calldata transactionId,\n        address to\n    ) public payable onlyMinter {\n        uint256 tokenId = nextTokenId + 1;\n        require(\n            priceLimit <= msg.value,\n            \"NLC: Price is less than expected\"\n        );\n        require(\n            tokenId <= issueLimit,\n            \"NLC: Issue limit has been reached\"\n        );\n        nextTokenId = tokenId;\n        _safeMint(to, tokenId);\n        (bool success, ) = payable(recipient).call{value: msg.value}(\"\");\n        require(success, \"NLC: fail to transfer fee\");\n        emit TokenMinted(transactionId, to, tokenId, recipient, msg.value);\n    }\n}\n"
      }
    },
    "settings": {
      "evmVersion": "paris",
      "optimizer": {
        "enabled": false,
        "runs": 200
      },
      "outputSelection": {
        "*": {
          "*": [
            "evm.bytecode",
            "evm.deployedBytecode",
            "devdoc",
            "userdoc",
            "metadata",
            "abi"
          ]
        }
      },
      "libraries": {}
    }
  }}