Datasets:

zeroshot

/

arxiv-biology

like 11

2009.11241

Deep learning for peptide identification from metaproteomics datasets

Metaproteomics are becoming widely used in microbiome research for gaining insights into the functional state of the microbial community. Current metaproteomics studies are generally based on high-throughput tandem mass spectrometry (MS/MS) coupled with liquid chromatography. The identification of peptides and proteins from MS data involves the computational procedure of searching MS/MS spectra against a predefined protein sequence database and assigning top-scored peptides to spectra. Existing computational tools are still far from being able to extract all the information out of large MS/MS datasets acquired from metaproteome samples. In this paper, we proposed a deep-learning-based algorithm, called DeepFilter, for improving the rate of confident peptide identifications from a collection of tandem mass spectra. Compared with other post-processing tools, including Percolator, Q-ranker, PeptideProphet, and Iprophet, DeepFilter identified 20% and 10% more peptide-spectrum-matches and proteins, respectively, on marine microbial and soil microbial metaproteome samples with false discovery rate at 1%.

2009.11531

Clustering methods and Bayesian inference for the analysis of the evolution of immune disorders

Choosing appropriate hyperparameters for unsupervised clustering algorithms in an optimal way depending on the problem under study is a long standing challenge, which we tackle while adapting clustering algorithms for immune disorder diagnoses. We compare the potential ability of unsupervised clustering algorithms to detect disease flares and remission periods through analysis of laboratory data from systemic lupus erythematosus patients records with different hyperparameter choices. To determine which clustering strategy is the best one we resort to a Bayesian analysis based on the Plackett-Luce model applied to rankings. This analysis quantifies the uncertainty in the choice of clustering methods for a given problem

2009.12338

The MetaSUB Microbiome Core Analysis Pipeline Enables Large Scale Metagenomic Analysis

Motivation: Accurate data analysis and quality control is critical for metagenomic studies. Though many tools exist to analyze metagenomic data there is no consistent framework to integrate and run these tools across projects. Currently, computational analysis of metagenomes is time consuming, often misses potentially interesting results, and is difficult to reproduce. Further, comparison between metagenomic studies is hampered by inconsistencies in tools and databases. Results: We present the MetaSUB Core Analysis Pipeline (CAP) a comprehensive tool to analyze metagenomes and summarize the results of a project. The CAP is designed in a bottom up fashion to perform QC, preprocessing, analysis and even to build relevant databases and install necessary tools. Availability and Implementation: The CAP is available under an MIT License on GitHub at https://github.com/MetaSUB/CAP2 and on the Python Package Index. Documentation and examples are available on GitHub.

2009.12984

Deep learning-based i-EEG classification with convolutional neural networks for drug-target interaction prediction

Drug-target interaction (DTI) prediction has become a foundational task in drug repositioning, polypharmacology, drug discovery, as well as drug resistance and side-effect prediction. DTI identification using machine learning is gaining popularity in these research areas. Through the years, numerous deep learning methods have been proposed for DTI prediction. Nevertheless, prediction accuracy and efficiency remain key challenges. Pharmaco-electroencephalogram (pharmaco-EEG) is considered valuable in the development of central nervous system-active drugs. Quantitative EEG analysis demonstrates high reliability in studying the effects of drugs on the brain. Earlier preclinical pharmaco-EEG studies showed that different types of drugs can be classified according to their mechanism of action on neural activity. Here, we propose a convolutional neural network for EEG-mediated DTI prediction. This new approach can explain the mechanisms underlying complicated drug actions, as it allows the identification of similarities in the mechanisms of action and effects of psychotropic drugs.

2010.00740

HIV transmission in men who have sex with men in England: on track for elimination by 2030?

Background: After a decade of a treatment as prevention (TasP) strategy based on progressive HIV testing scale-up and earlier treatment, a reduction in the estimated number of new infections in men-who-have-sex-with-men (MSM) in England had yet to be identified by 2010. To achieve internationally agreed targets for HIV control and elimination, test-and-treat prevention efforts have been dramatically intensified over the period 2010-2015, and, from 2016, further strengthened by pre-exposure prophylaxis (PrEP). Methods: Application of a novel age-stratified back-calculation approach to data on new HIV diagnoses and CD4 count-at-diagnosis, enabled age-specific estimation of HIV incidence, undiagnosed infections and mean time-to-diagnosis across both the 2010-2015 and 2016-2018 periods. Estimated incidence trends were then extrapolated, to quantify the likelihood of achieving HIV elimination by 2030. Findings: A fall in HIV incidence in MSM is estimated to have started in 2012/3, eighteen months before the observed fall in new diagnoses. A steep decrease from 2,770 annual infections (95% credible interval 2.490-3,040) in 2013 to 1,740 (1,500-2,010) in 2015 is estimated, followed by steady decline from 2016, reaching 854 (441-1,540) infections in 2018. A decline is consistently estimated in all age groups, with a fall particularly marked in the 24-35 age group, and slowest in the 45+ group. Comparable declines are estimated in the number of undiagnosed infections. Interpretation: The peak and subsequent sharp decline in HIV incidence occurred prior to the phase-in of PrEP. Definining elimination as a public health threat to be < 50 new infections (1.1 infections per 10,000 at risk), 40% of incidence projections hit this threshold by 2030. In practice, targeted policies will be required, particularly among the 45+y where STIs are increasing most rapidly.

2010.01260

Global analysis of more than 50,000 SARS-Cov-2 genomes reveals epistasis between 8 viral genes

Genome-wide epistasis analysis is a powerful tool to infer gene interactions, which can guide drug and vaccine development and lead to a deeper understanding of microbial pathogenesis. We have considered all complete SARS-CoV-2 genomes deposited in the GISAID repository until \textbf{four} different cut-off dates, and used Direct Coupling Analysis together with an assumption of Quasi-Linkage Equilibrium to infer epistatic contributions to fitness from polymorphic loci. We find \textbf{eight} interactions, of which three between pairs where one locus lies in gene ORF3a, both loci holding non-synonymous mutations. We also find interactions between two loci in gene nsp13, both holding non-synonymous mutations, and four interactions involving one locus holding a synonymous mutation. Altogether we infer interactions between loci in viral genes ORF3a and nsp2, nsp12 and nsp6, between ORF8 and nsp4, and between loci in genes nsp2, nsp13 and nsp14. The paper opens the prospect to use prominent epistatically linked pairs as a starting point to search for combinatorial weaknesses of recombinant viral pathogens.

2010.02952

Injury risk increases minimally over a large range of changes in activity level in children

Background: Limited research exists on the association between changes in physical activity levels and injury in children. Objective: To assess how well different variations of the acute:chronic workload ratio (ACWR), a measure of change in activity, predict injury in children. Methods: We conducted a prospective cohort study using data from 1670 Danish schoolchildren measured over 5.5 years (2008 to 2014). Coupled 4-week, uncoupled 4-week, and uncoupled 5-week ACWRs were calculated using activity frequency in the past week as the acute load (numerator), and average weekly activity frequency in the past 4 or 5 weeks as the chronic load (denominator). We modelled the relationship between different ACWR variations and injury using generalized linear and generalized additive models, with and without accounting for repeated measures. Results: The prognostic relationship between the ACWR and injury risk was best represented using a generalized additive mixed model for the uncoupled 5-week ACWR. It predicted an injury risk of ~3% for ACWRs between 0.8 (activity level decreased by 20%) and 1.5 (activity level increased by 50%). When activity decreased by more than 20% (ACWR< 0.8), injury risk was lower (minimum of 1.5% at ACWR=0). When activity increased by more than 50% (ACWR > 1.5), injury risk was higher (maximum of 6% at ACWR = 5). Girls were at significantly higher risk of injury than boys. Conclusion: Increases in physical activity in children are associated with much lower injury risks compared to previous results in adults.

2010.03317

Parameter estimation in FACS-seq enables high-throughput characterization of phenotypic heterogeneity

Phenotypic heterogeneity is a most fascinating property of a population of cells, which shows the differences among individuals even with the same genetic background and extracellular environmental conditions. However, the lack of high-throughput analysis of phenotypic diversity has limited our research progress. To deal with it, we constructed a novel parameter estimation method in FACS-seq, a commonly used experimental framework, to achieve simultaneous characterization of thousands of variants in a library. We further demonstrated the model's ability in estimating the expression properties of each variant, which we believe can help to decipher the mechanisms of phenotypic heterogeneity.

2010.07399

Nanopores -- a Versatile Tool to Study Protein Dynamics

Proteins are the active working horses in our body. These biomolecules perform all vital cellular functions from DNA replication and general biosynthesis to metabolic signaling and environmental sensing. While static 3D structures are now readily available, observing the functional cycle of proteins - involving conformational changes and interactions - remains very challenging, e.g., due to ensemble averaging. However, time-resolved information is crucial to gain a mechanistic understanding of protein function. Single-molecule techniques such as FRET and force spectroscopies provide answers but can be limited by the required labelling, a narrow time bandwidth, and more. Here, we describe electrical nanopore detection as a tool for probing protein dynamics. With a time bandwidth ranging from microseconds to hours, it covers an exceptionally wide range of timescales that is very relevant for protein function. First, we discuss the working principle of label-free nanopore experiments, various pore designs, instrumentation, and the characteristics of nanopore signals. In the second part, we review a few nanopore experiments that solved research questions in protein science, and we compare nanopores to other single-molecule techniques. We hope to make electrical nanopore sensing more accessible to the biochemical community, and to inspire new creative solutions to resolve a variety of protein dynamics - one molecule at a time.

2010.07506

EIC (Expert Information Criterion) not AIC: the cautious biologist's guide to model selection

1.A goal of many research programs in biology is to extract meaningful insights from large, complex data sets. Researchers in Ecology, Evolution and Behavior (EEB) often grapple with long-term, observational data sets from which they construct models to address fundamental questions about biology. Similarly, epidemiologists analyze large, complex observational data sets to understand the distribution and determinants of human health and disease. A key difference in the analytical workflows for these two distinct areas of biology is delineation of data analysis tasks and explicit use of causal inference methods, widely adopted by epidemiologists. 2.Here, we review the most recent causal inference literature and describe an analytical workflow that has direct applications for EEB researchers. 3.The first half of this commentary defines four distinct analytical tasks (description, prediction, association, and causal inference), and the corresponding approaches to data analysis and model selection. The latter half is dedicated to walking the reader through the steps of casual inference, focusing on examples from EEB. 4.Given increasing interest in causal inference and common misperceptions regarding the task of causal inference, we aim to facilitate an exchange of ideas between disciplinary silos and provide a framework for analyses of all data, though particularly relevant for observational data.

2010.09302

Comparison of surface thermal patterns of horses and donkeys in IRT images

Infrared thermography (IRT) is a valuable diagnostic tool in equine veterinary medicine however, little is known about its application in donkeys. The aim was to find patterns in thermal images of donkeys and horses, and determine if these patterns share similarities. The study was carried out on 18 donkeys and 16 horses. All equids underwent thermal imaging with an infrared camera and measuring the skin thickness and hair coat length. On the class maps of each thermal image, 15 regions of interest (ROIs) were annotated and then combined into 10 groups of ROIs (GORs). The existence of statistically significant differences between surface temperatures in GORs was tested both `globally' for all animals of a given species and `locally' for each animal. Two special cases of animals that differ from the rest were also discussed. Our results indicated that the majority of thermal patterns are similar for both species however, average surface temperatures in horses are higher than in donkeys. It may be related to differences in the skin and hair coat. We concluded, the patterns of both species are associated with GORs, rather than an individual ROI, with higher uniformity of donkeys patterns.

2010.10829

Integrating microbial electrochemical technologies with anaerobic digestion to accelerate propionate degradation

The aim of this study is to evaluate the integration of microbial electrochemical technologies (MET) with anaerobic digestion (AD) to overcome AD limitations caused by propionate accumulation. The study focuses on understanding to what extent the inoculum impacts on the behaviour of the integrated systems (AD-MET) from the perspective of propionate degradation, methane production and microbial population dynamics. Three different inocula were used: two from environmental sources (anaerobic sludge and river sediment) and another one from a pre-enriched electroactive consortium adapted to propionate degradation. Contrary to expectations, the reactor inoculated with the pre-enriched consortium was not able to maintain its initial good performance in the long run, and the bioelectrochemical activity collapsed after three months of operation. In contrast, the reactor inoculated with anaerobic sludge, although it required a relatively longer time to produce any observable current, was able to maintain the electrogenic activity operation (0.8 A.m-2) as well as the positive contribution of AD-MET integration to tackle propionate accumulation and to enhance methane yield (338 mL.gCOD-1). However, it must also be highlighted that from a purely energetic point of view the AD-MET was not favorable.

2010.12706

A damaged-informed lung model for ventilator waveforms

The acute respiratory distress syndrome (ARDS) is characterized by the acute development of diffuse alveolar damage (DAD) resulting in increased vascular permeability and decreased alveolar gas exchange. Mechanical ventilation is a potentially lifesaving intervention to improve oxygen exchange but has the potential to cause ventilator-induced lung injury (VILI). A general strategy to reduce VILI is to use low tidal volume and low-pressure ventilation, but optimal ventilator settings for an individual patient are difficult for the bedside physician to determine and mortality from ARDS remains unacceptably high. Motivated by the need to minimize VILI, scientists have developed models of varying complexity to understand diseased pulmonary physiology. However, simple models often fail to capture real-world injury while complex models tend to not be estimable with clinical data, limiting the clinical utility of existing models. To address this gap, we present a physiologically anchored data-driven model to better model lung injury. Our approach relies on using clinically relevant features in the ventilator waveform data that contain information about pulmonary physiology, patients-ventilator interaction and ventilator settings. Our lung model can reproduce essential physiology and pathophysiology dynamics of differently damaged lungs for both controlled mouse model data and uncontrolled human ICU data. The estimated parameters values that are correlated with a known measure of lung physiology agree with the observed lung damage. In future endeavors, this model could be used to phenotype ventilator waveforms and serve as a basis for predicting the course of ARDS and improving patient care.

2011.01069

Describing the movement of molecules in reduced-dimension models

When addressing spatial biological questions using mathematical models, symmetries within the system are often exploited to simplify the problem by reducing its physical dimension. In a reduced-dimension model molecular movement is restricted to the reduced dimension, changing the nature of molecular movement. This change in molecular movement can lead to quantitatively and even qualitatively different results in the full and reduced systems. Within this manuscript we discuss the condition under which restricted molecular movement in reduced-dimension models accurately approximates molecular movement in the full system. For those systems which do not satisfy the condition, we present a general method for approximating unrestricted molecular movement in reduced-dimension models. We will derive a mathematically robust, finite difference method for solving the 2D diffusion equation within a 1D reduced-dimension model. The methods described here can be used to improve the accuracy of many reduced-dimension models while retaining benefits of system simplification.

2011.01688

Imaging the Beating Heart with Macroscopic Phase Stamping

We present a novel approach for imaging the beating embryonic heart, based on combining two independent imaging channels to capture the full spatio-temporal information of the moving 3D structure. High-resolution, optically-sectioned image recording is accompanied by simultaneous acquisition of low-resolution, whole-heart recording, allowing the latter to be used in post-acquisition processing to determine the macroscopic spatio-temporal phase of the heart beating cycle. Once determined, or 'stamped', the phase information common to both imaging channels is used to reconstruct the 3D beating heart. We demonstrated our approach in imaging the beating heart of the zebrafish embryo, capturing the entire heart over its full beating cycle, and characterizing cellular dynamic behavior with sub-cellular resolution.

2011.03518

Transformer Based Molecule Encoding for Property Prediction

Neural methods of molecule property prediction require efficient encoding of structure and property relationship to be accurate. Recent work using graph algorithms shows limited generalization in the latent molecule encoding space. We build a Transformer-based molecule encoder and property predictor network with novel input featurization that performs significantly better than existing methods. We adapt our model to semi-supervised learning to further perform well on the limited experimental data usually available in practice.

2011.03767

Tree species effects on topsoil carbon stock and concentration are mediated by tree species type, mycorrhizal association, and N-fixing ability at the global scale

Selection of appropriate tree species is an important forest management decision that may affect sequestration of carbon (C) in soil. However, information about tree species effects on soil C stocks at the global scale remains unclear. Here, we quantitatively synthesized 850 observations from field studies that were conducted in a common garden or monoculture plantations to assess how tree species type (broadleaf vs. conifer), mycorrhizal association (arbuscular mycorrhizal (AM) vs. ectomycorrhizal (ECM)), and N-fixing ability (N-fixing vs. non-N-fixing), directly and indirectly, affect topsoil (with a median depth of 10 cm) C concentration and stock, and how such effects were influenced by environmental factors such as geographical location and climate. We found that (1) tree species type, mycorrhizal association, and N-fixing ability were all important factors affecting soil C, with lower forest floor C stocks under broadleaved (44%), AM (39%), or N-fixing (28%) trees respectively, but higher mineral soil C concentration (11%, 22%, and 156%) and stock (9%, 10%, and 6%) under broadleaved, AM, and N-fixing trees respectively; (2) tree species type, mycorrhizal association, and N-fixing ability affected forest floor C stock and mineral soil C concentration and stock directly or indirectly through impacting soil properties such as microbial biomass C and nitrogen; (3) tree species effects on mineral soil C concentration and stock were mediated by latitude, MAT, MAP, and forest stand age. These results reveal how tree species and their specific traits influence forest floor C stock and mineral soil C concentration and stock at a global scale. Insights into the underlying mechanisms of tree species effects found in our study would be useful to inform tree species selection in forest management or afforestation aiming to sequester more atmospheric C in soil for mitigation of climate change.

2011.05304

Label-free Raman spectroscopy and machine learning enables sensitive evaluation of differential response to immunotherapy

Cancer immunotherapy provides durable clinical benefit in only a small fraction of patients, particularly due to a lack of reliable biomarkers for accurate prediction of treatment outcomes and evaluation of response. Here, we demonstrate the first application of label-free Raman spectroscopy for elucidating biochemical changes induced by immunotherapy in the tumor microenvironment. We used CT26 murine colorectal cancer cells to grow tumor xenografts and subjected them to treatment with anti-CTLA-4 and anti-PD-L1 antibodies. Multivariate curve resolution - alternating least squares (MCR-ALS) decomposition of Raman spectral dataset obtained from the treated and control tumors revealed subtle differences in lipid, nucleic acid, and collagen content due to therapy. Our supervised classification analysis using support vector machines and random forests provided excellent prediction accuracies for both immune checkpoint inhibitors and delineated important spectral markers specific to each therapy, consistent with their differential mechanisms of action. Our findings pave the way for in vivo studies of response to immunotherapy in clinical patients using label-free Raman spectroscopy and machine learning.

2011.05521

Lamotrigine Therapy for Bipolar Depression: Analysis of Self-Reported Patient Data

Background: Depression in people with bipolar disorder is a major cause of long-term disability, possibly leading to early mortality and currently, limited safe and effective therapies exist. A double-blinded randomized placebo-controlled trial (CEQUEL study) was conducted to evaluate the efficacy of Lamotrigine plus Quetiapine versus Quetiapine monotherapy in patients with bipolar type I or type II disorders. Objective: The objective of our study was to reanalyze CEQUEL data and determine an unbiased classification accuracy for active lamotrigine versus placebo. We also wanted to establish the time it took for the drug to provide statistically significant outcomes. Methods: Between October 21, 2008 and April 27, 2012, 202 participants from 27 sites in United Kingdom were randomly assigned to two treatments; 101: lamotrigine, 101: placebo. The primary variable used for estimating depressive symptoms was based on the Quick Inventory of Depressive Symptomatology-self report version 16 (QIDS-SR16). We analyze the data using feature engineering and simple classifiers. Results: From weeks 10 to 14, the mean difference in QIDS-SR16 ratings between the groups was -1.6317 (P=.09; sample size=81, 77; 95% CI -0.2403 to 3.5036). From weeks 48 to 52, the mean difference was -2.0032 (P=.09; sample size=54, 48; 95% CI -0.3433 to 4.3497). The coefficient of variation and detrended fluctuation analysis (DFA) exponent alpha had the greatest explanatory power. The out-of-sample classification accuracy for the 138 participants who reported more than 10 times after week 12 was 62%. A consistent classification accuracy higher than the no-information benchmark was obtained in week 44. Conclusions: Lamotrigine plus Quetiapine treatment decreased depressive symptoms in patients, but with substantial temporal instability. A trial of at least 44 weeks was required to achieve consistent results.

2011.08703

Effectiveness Of Sesame Oil For The Prevention Of Pressure Ulcer In Patients With Bed Rest Undergoing Hospitalization

Pressure Ulcer is one of the most problems in patients with bed rest. Reposition and skin care are deterrent against the incidence of pressure ulcer. Objective: This study aimed to analyze the effectiveness of sesame oil for the prevention of pressure ulcer in patients with bed rest undergoing hospitalization. Method: This study used a randomized controlled trial design. Forty samples were divided groups: control and intervention groups. This study was analysed using Chi Square. Results: The results showed that there was a significant difference between two group (p=0,04). Conclusions: Skin care with sesame oil can prevention of pressure ulcers. These results recommended that sesame oil can be used for nursing intervention for the prevention of pressure ulcers.

2011.11396

THCluster: herb supplements categorization for precision traditional Chinese medicine

There has been a continuing demand for traditional and complementary medicine worldwide. A fundamental and important topic in Traditional Chinese Medicine (TCM) is to optimize the prescription and to detect herb regularities from TCM data. In this paper, we propose a novel clustering model to solve this general problem of herb categorization, a pivotal task of prescription optimization and herb regularities. The model utilizes Random Walks method, Bayesian rules and Expectation Maximization(EM) models to complete a clustering analysis effectively on a heterogeneous information network. We performed extensive experiments on the real-world datasets and compared our method with other algorithms and experts. Experimental results have demonstrated the effectiveness of the proposed model for discovering useful categorization of herbs and its potential clinical manifestations.

2011.11546

Microalgae-based bioremediation of water contaminated by pesticides in peri-urban agricultural areas

The present study evaluated the capacity of a semi-closed, tubular horizontal photobioreactor (PBR) to remove pesticides from agricultural run-off. The study was carried out in July to study its efficiency under the best conditions (highest solar irradiation). A total of 51 pesticides, including 10 transformation products, were selected and investigated based on their consumption rate and environmental relevance. Sixteen of them were detected in the agricultural run-off, and the estimated removal efficiencies ranged from negative values, obtained for 3 compounds, namely terbutryn, diuron, and imidacloprid, to 100%, achieved for 10 compounds. The acidic herbicide MCPA was removed by 88% on average, and the insecticides 2,4-D and diazinon showed variable removals, between 100% and negative values. The environmental risk associated with the compounds still present in the effluent of the PBR was evaluated using hazard quotients (HQs), calculated using the average and highest measured concentrations of the compounds. HQ values > 10 (meaning high risk) were obtained for imidacloprid (21), between 1 and 10 (meaning moderate risk) for 2,4-D (2.8), diazinon (4.6) and terbutryn (1.5), and < 1 (meaning low risk) for the remaining compounds diuron, linuron, and MCPA. The PBR treatment yielded variable removals depending on the compound, similar to conventional wastewater treatment plants. This study provides new data on the capacity of icroalgae-based treatment systems to eliminate a wide range of priority pesticides under real/environmental conditions.

2011.11638

Fungal bioremediation of diuron-contaminated waters: evaluation of its degradation and the effect of amendable factors on its removal in a trickle-bed reactor under non-sterile conditions

The occurrence of the extensively used herbicide diuron in the environment poses a severe threat to the ecosystem and human health. Four different ligninolytic fungi were studied as biodegradation candidates for the removal of diuron. Among them, T. versicolor was the most effective species, degrading rapidly not only diuron (83%) but also the major metabolite 3,4-dichloroaniline (100%), after 7-day incubation. During diuron degradation, five transformation products (TPs) were found to be formed and the structures for three of them are tentatively proposed. According to the identified TPs, a hydroxylated intermediate 3-(3,4-dichlorophenyl)-1-hydroxymethyl-1-methylurea (DCPHMU) was further metabolized into the N-dealkylated compounds 3-(3,4-dichlorophenyl)-1-methylurea (DCPMU) and 3,4-dichlorophenylurea (DCPU). The discovery of DCPHMU suggests a relevant role of hydroxylation for subsequent N-demethylation, helping to better understand the main reaction mechanisms of diuron detoxification. Experiments also evidenced that degradation reactions may occur intracellularly and be catalyzed by the cytochrome P450 system. A response surface method, established by central composite design, assisted in evaluating the effect of operational variables in a trickle-bed bioreactor immobilized with T. versicolor on diuron removal. The best performance was obtained at low recycling ratios and influent flow rates. Furthermore, results indicate that the contact time between the contaminant and immobilized fungi plays a crucial role in diuron removal. This study represents a pioneering step forward amid techniques for bioremediation of pesticides-contaminated waters using fungal reactors at a real scale.

2011.13111

A method to predict location of non-coup brain injuries

Brain injuries are a major reason for mortality and morbidity following trauma in sports, work and traffic. Apart from the trauma at the site of impact (coup injury), other regions of the brain remote from the impact locations (non-coup) are commonly affected. We show that a screw theory-based method can be used to account for the combined effect of head rotational and linear accelerations in causing brain injuries. A scalar measure obtained from the inner product of the motion screw and the impact screw is shown to be a predictor of the severity and the location of non-coup brain injuries under an impact. The predictions are consistent with head impact experiments conducted with non-human primates. The methodology is proved using finite element simulations and already published experimental results

2012.00566

Discovering novel cancer bio-markers in acquired lapatinib resistance using Bayesian methods

Genes/Proteins do not work alone within our body, rather as a group they perform certain activities indicated as pathways. Signalling transduction pathways (STPs) are some of the important pathways that transmit biological signals from protein-to-protein controlling several cellular activities. However, many diseases such as cancer target some of these signalling pathways for their growth and malignance, but demystifying their underlying mechanisms are a very complicated tasks. In this study, we use a fully Bayesian approach to develop methodologies in discovering novel driver bio-markers in aberrant STPs given two-conditional high-throughput gene expression data. This project, namely PathTurbEr (Pathway Perturbation Driver), is applied on a global gene expression dataset derived from the lapatinib (an EGFR/HER dual inhibitor) sensitive and resistant samples from breast cancer cell lines (SKBR3). Differential expression analysis revealed 512 differentially expressed genes (DEGs) and their signalling pathway enrichment analysis revealed 22 singalling pathways as aberrated including PI3K-AKT, Hippo, Chemokine, and TGF-beta singalling pathway as highly dysregulated in lapatinib resistance. Next, we model the aberrant activities in TGF-beta STP as a causal Bayesian network (BN) from given observational datasets using three Markov Chain Monte Carlo (MCMC) sampling methods, i.e. Neighbourhood sampler (NS) and Hit-and-Run (HAR) sampler, which has already proven to have more robust inference with lower chances of getting stuck at local optima and faster convergence compared to other state-of-art methods. Next, we examined the structural features of the optimal BN as a statistical process that generates the global structure using, $p_1$-model, a special class of Exponential Random Graph Models (ERGMs) and MCMC methods for their hyper-parameter sampling....

2012.00672

Dynamics-based peptide-MHC binding optimization by a convolutional variational autoencoder: a use-case model for CASTELO

An unsolved challenge in the development of antigen specific immunotherapies is determining the optimal antigens to target. Comprehension of antigen-MHC binding is paramount towards achieving this goal. Here, we present CASTELO, a combined machine learning-molecular dynamics (ML-MD) approach to design novel antigens of increased MHC binding affinity for a Type 1 diabetes (T1D)-implicated system. We build upon a small molecule lead optimization algorithm by training a convolutional variational autoencoder (CVAE) on MD trajectories of 48 different systems across 4 antigens and 4 HLA serotypes. We develop several new machine learning metrics including a structure-based anchor residue classification model as well as cluster comparison scores. ML-MD predictions agree well with experimental binding results and free energy perturbation-predicted binding affinities. Moreover, ML-MD metrics are independent of traditional MD stability metrics such as contact area and RMSF, which do not reflect binding affinity data. Our work supports the role of structure-based deep learning techniques in antigen specific immunotherapy design.

2012.04399

SimAEN -- Simulated Automated Exposure Notification

Mitigation strategies that remove infectious individuals from the greater population have to balance their efficacy with the economic effects associated with quarantine and have to contend with the limited resources available to the public health authorities. Prior strategies have relied on testing and contact tracing to find individuals before they become infectious and in order to limit their interactions with others until after their infectious period has passed. Manual contact tracing is a public health intervention where individuals testing positive are interviewed to identify other members of the community who they may have come into contact with. These interviews can take a significant amount of time that has to be tallied in the overall accounting of the outbreak cost. The concept of contact tracing has been expanded recently into Automated Exposure Notification whereby cellphones can be used as sensor platforms to log close contacts and notify the owner in the event that one of their close contacts tests positive. The intention is that this notification will prompt the person to be tested and then restrict their interactions with others until their status is determined. In this paper we describe our efforts to investigate the effectiveness of contact tracing interventions on controlling an outbreak. This is accomplished by creating a model of disease spread and then observing the impact that simulated tracing and testing have on the number of infected individuals. Model parameters are explored to identify critical transition points where interventions become effective. We estimate the benefits as well as costs in order to offer insight to public health officials as they select courses of action.

2012.05744

Markov chain Monte Carlo methods for hierarchical clustering of dynamic causal models

In this paper, we address technical difficulties that arise when applying Markov chain Monte Carlo (MCMC) to hierarchical models designed to perform clustering in the space of latent parameters of subject-wise generative models. Specifically, we focus on the case where the subject-wise generative model is a dynamic causal model (DCM) for fMRI and clusters are defined in terms of effective brain connectivity. While an attractive approach for detecting mechanistically interpretable subgroups in heterogeneous populations, inverting such a hierarchical model represents a particularly challenging case, since DCM is often characterized by high posterior correlations between its parameters. In this context, standard MCMC schemes exhibit poor performance and extremely slow convergence. In this paper, we investigate the properties of hierarchical clustering which lead to the observed failure of standard MCMC schemes and propose a solution designed to improve convergence but preserve computational complexity. Specifically, we introduce a class of proposal distributions which aims to capture the interdependencies between the parameters of the clustering and subject-wise generative models and helps to reduce random walk behaviour of the MCMC scheme. Critically, these proposal distributions only introduce a single hyperparameter that needs to be tuned to achieve good performance. For validation, we apply our proposed solution to synthetic and real-world datasets and also compare it, in terms of computational complexity and performance, to Hamiltonian Monte Carlo (HMC), a state-of-the-art Monte Carlo. Our results indicate that, for the specific application domain considered here, our proposed solution shows good convergence performance and superior runtime compared to HMC.

2012.06990

A Novel Tool for the Accurate and Affordable Early Diagnosis of Pancreatic Cancer via Machine Learning and Bioinformatics

Pancreatic cancer (PC) is the fourth leading cause of cancer death in the United States due to its five-year survival rate of 10%. Late diagnosis, affiliated with the asymptomatic nature in early stages and the location of the cancer with respect to the pancreas, makes current widely-accepted screening methods unavailable. Prior studies have achieved low (70-75%) diagnostic accuracy, possibly because 80% of PC cases are associated with diabetes, leading to misdiagnosis. To address the problems of frequent late diagnosis and misdiagnosis, we developed an accessible, accurate and affordable diagnostic tool for PC, by analyzing the expression of nineteen genes in PC and diabetes. First, machine learning algorithms were trained on four groups of subjects, depending on the occurrence of PC and Diabetes. The models were analyzed with 400 PC subjects at varying stages to ensure validity. Naive Bayes, Neural Network and K-Nearest Neighbors models achieved the highest testing accuracy of around 92.6%. Second, the biological implication of the nineteen genes was investigated using bioinformatics tools. It was found that these genes were significantly involved in regulating the cytoplasm, cytoskeleton and nuclear receptor activity in the pancreas, specifically in acinar and ductal cells. Our novel tool is the first in the literature that achieves a PC diagnostic accuracy of above 90%, having the potential to significantly improve the detection of PC in the background of diabetes and increase the five-year survival rate.

2012.09122

AMICI: High-Performance Sensitivity Analysis for Large Ordinary Differential Equation Models

Ordinary differential equation models facilitate the understanding of cellular signal transduction and other biological processes. However, for large and comprehensive models, the computational cost of simulating or calibrating can be limiting. AMICI is a modular toolbox implemented in C++/Python/MATLAB that provides efficient simulation and sensitivity analysis routines tailored for scalable, gradient-based parameter estimation and uncertainty quantification. AMICI is published under the permissive BSD-3-Clause license with source code publicly available on https://github.com/AMICI-dev/AMICI. Citeable releases are archived on Zenodo.

2012.10331

Neural network fast-classifies biological images using features selected after their random-forests-importance to power smart microscopy

Artificial intelligence is nowadays used for cell detection and classification in optical microscopy, during post-acquisition analysis. The microscopes are now fully automated and next expected to be smart, to make acquisition decisions based on the images. It calls for analysing them on the fly. Biology further imposes training on a reduced dataset due to cost and time to prepare the samples and have the datasets annotated by experts. We propose here a real-time image processing, compliant with these specifications by balancing accurate detection and execution performance. We characterised the images using a generic, high-dimensional feature extractor. We then classified the images using machine learning for the sake of understanding the contribution of each feature in decision and execution time. We found that the non-linear-classifier random forests outperformed Fisher's linear discriminant. More importantly, the most discriminant and time-consuming features could be excluded without any significant loss in accuracy, offering a substantial gain in execution time. It suggests a feature-group redundancy likely related to the biology of the observed cells. We offer a method to select fast and discriminant features. In our assay, a 79.6 $\pm$ 2.4 % accurate classification of a cell took 68.7 $\pm$ 3.5 ms (mean $\pm$ SD, 5-fold cross-validation nested in 10 bootstrap repeats), corresponding to 14 cells per second, dispatched into 8 phases of the cell cycle using 12 feature-groups and operating a consumer market ARM-based embedded system. Interestingly, a simple neural network offered similar performances paving the way to faster training and classification, using parallel execution on a general-purpose graphic processing unit. Finally, this strategy is also usable for deep neural networks paving the way to optimising these algorithms for smart microscopy.

2012.15223

Incorporating domain growth into hybrid methods for reaction-diffusion systems

Reaction--diffusion mechanism are a robust paradigm that can be used to represent many biological and physical phenomena over multiple spatial scales. Applications include intracellular dynamics, the migration of cells and the patterns formed by vegetation in semi-arid landscapes. Moreover, domain growth is an important process for embryonic growth and wound healing. There are many numerical modelling frameworks capable of simulating such systems on growing domains, however each of these may be well suited to different spatial scales and particle numbers. Recently, spatially extended hybrid methods on static domains have been produced in order to bridge the gap between these different modelling paradigms in order to represent multiscale phenomena. However, such methods have not been developed with domain growth in mind. In this paper, we develop three hybrid methods on growing domains, extending three of the prominent static domain hybrid methods. We also provide detailed algorithms to allow others to employ them. We demonstrate that the methods are able to accurately model three representative reaction-diffusion systems accurately and without bias.

2012.15268

UMAP-assisted $K$-means clustering of large-scale SARS-CoV-2 mutation datasets

Coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has a worldwide devastating effect. The understanding of evolution and transmission of SARS-CoV-2 is of paramount importance for the COVID-19 control, combating, and prevention. Due to the rapid growth of both the number of SARS-CoV-2 genome sequences and the number of unique mutations, the phylogenetic analysis of SARS-CoV-2 genome isolates faces an emergent large-data challenge. We introduce a dimension-reduced $k$-means clustering strategy to tackle this challenge. We examine the performance and effectiveness of three dimension-reduction algorithms: principal component analysis (PCA), t-distributed stochastic neighbor embedding (t-SNE), and uniform manifold approximation and projection (UMAP). By using four benchmark datasets, we found that UMAP is the best-suited technique due to its stable, reliable, and efficient performance, its ability to improve clustering accuracy, especially for large Jaccard distanced-based datasets, and its superior clustering visualization. The UMAP-assisted $k$-means clustering enables us to shed light on increasingly large datasets from SARS-CoV-2 genome isolates.

2012.15647

Indirect Measurement of Hepatic Drug Clearance by Fitting Dynamical Models

We present an indirect signal processing-based measurement method for biological quantities in humans that cannot be directly measured. We develop the method by focusing on estimating hepatic enzyme and drug transporter activity through breath-biopsy samples clinically obtained via the erythromycin breath test (EBT): a small dose of radio-labeled drug is injected and the subsequent content of radio-labeled CO$_2$ is measured repeatedly in exhaled breath; the resulting time series is analyzed. To model EBT we developed a 14-variable non-linear reduced order dynamical model that describes the behavior of the drug and its metabolites in the human body well enough to capture all biological phenomena of interest. Based on this system of coupled non-linear ordinary differential equations (ODEs) we treat the measurement problem as inverse problem: we estimate the ODE parameters of individual patients from the measured EBT time series. These estimates then provide a measurement of the liver activity of interest. The parameters are hard to estimate as the ODEs are stiff and the problem needs to be regularized to ensure stable convergence. We develop a formal operator framework to capture and treat the specific non-linearities present, and perform perturbation analysis to establish properties of the estimation procedure and its solution. Development of the method required 150,000 CPU hours at a supercomputing center, and a single production run takes CPU 24 hours. We introduce and analyze the method in the context of future precision dosing of drugs for vulnerable patients (e.g., oncology, nephrology, or pediatrics) to eventually ensure efficacy and avoid toxicity.

2101.00523

Topological data analysis distinguishes parameter regimes in the Anderson-Chaplain model of angiogenesis

Angiogenesis is the process by which blood vessels form from pre-existing vessels. It plays a key role in many biological processes, including embryonic development and wound healing, and contributes to many diseases including cancer and rheumatoid arthritis. The structure of the resulting vessel networks determines their ability to deliver nutrients and remove waste products from biological tissues. Here we simulate the Anderson-Chaplain model of angiogenesis at different parameter values and quantify the vessel architectures of the resulting synthetic data. Specifically, we propose a topological data analysis (TDA) pipeline for systematic analysis of the model. TDA is a vibrant and relatively new field of computational mathematics for studying the shape of data. We compute topological and standard descriptors of model simulations generated by different parameter values. We show that TDA of model simulation data stratifies parameter space into regions with similar vessel morphology. The methodologies proposed here are widely applicable to other synthetic and experimental data including wound healing, development, and plant biology.

2101.03125

Bee Cluster 3D: A system to monitor the temperature in a hive over time

A new system, Bee Cluster 3D, allowing the study of the time evolution of the 3D temperature distribution in a bee hive is presented. This system can be used to evaluate the cluster size and the location of the queen during winter. In summer, the device can be used to quantify the size of the brood nest and the breeding activity of the queen. The system does not disturb the activity of the colony and can be used on any hive. This electronic system was developed to be non-intrusive, miniaturized, and energy autonomous.

2101.03257

A Cloud connected NO2 and Ozone Sensor System for Personalized Pediatric Asthma Research and Management

This paper presents a cloud-connected indoor air quality sensor system that can be deployed to patients' homes to study personal microenvironmental exposure for asthma research and management. The system consists of multiple compact sensor units that can measure residential NO2, ozone, humidity, and temperature at one minute resolution and a cloud based informatic system that acquires, stores, and visualizes the microenvironmental data in real time. The sensor hardware can measure NO2 as low as 10 ppb and ozone at 15 ppb. The cloud informatic system is implemented using open-source software on Amazon Web Service for easy deployment and scalability. This system was successfully deployed to pediatric asthma patients' homes in a pilot study. In this study, we discovered that some families can have short term NO2 exposure higher than EPA's one hour exposure limit (100 ppb), and NO2 micropollution episodes often arise from natural gas appliance usage such as gas stove burning during cooking. By combining the personalized air pollutant exposure measurements with the physiological responses from a patient diary and medical record, this system can enable novel asthma research and personalized asthma management.

2101.04183

Detecting seasonal episodic-like spatiotemporal memory patterns using animal movement modelling

1. Spatial memory plays a role in the way animals perceive their environments, resulting in memory-informed movement patterns that are observable to ecologists. Developing mathematical techniques to understand how animals use memory in their environments allows for an increased understanding of animal cognition. 2. Here we describe a model that accounts for the memory of seasonal or ephemeral qualities of an animal's environment. The model captures multiple behaviors at once by allowing for resource selection in the present time as well as long-distance navigations to previously visited locations within an animal's home range. 3. We performed a set of analyses on simulated data to test our model, determining that it can provide informative results from as little as one year of discrete-time location data. We also show that the accuracy of model selection and parameter estimation increases with more location data. 4. This model has potential to identify a specific mechanism in which animals use memory to optimize their foraging, by revisiting temporally and predictably variable resources at consistent time lags.

2101.05359

A Systematic Review of the Efforts and Hindrances of Modeling and Simulation of CAR T-cell Therapy

Chimeric Antigen Receptor (CAR) T-cell therapy is an immunotherapy that has recently become highly instrumental in the fight against life-threatening diseases. A variety of modeling and computational simulation efforts have addressed different aspects of CAR T therapy, including T-cell activation, T- and malignant cell population dynamics, therapeutic cost-effectiveness strategies, and patient survival analyses. In this article, we present a systematic review of those efforts, including mathematical, statistical, and stochastic models employing a wide range of algorithms, from differential equations to machine learning. To the best of our knowledge, this is the first review of all such models studying CAR T therapy. In this review, we provide a detailed summary of the strengths, limitations, methodology, data used, and data lacking in current published models. This information may help in designing and building better models for enhanced prediction and assessment of the benefit-risk balance associated with novel CAR T therapies, as well as with the data collection essential for building such models.

2101.05522

Constructed wetlands operated as bioelectrochemical systems for the removal of organic micropollutants

The removal of organic micropollutants (OMPs) has been investigated in constructed wetlands (CWs) operated as bioelectrochemical systems (BES). The operation of CWs as BES (CW-BES), either in the form of microbial fuel cells (MFC) or microbial electrolysis cells (MEC), has only been investigated in recent years. The presented experiment used CW meso-scale systems applying a realistic horizontal flow regime and continuous feeding of real urban wastewater spiked with four OMPs (pharmaceuticals), namely carbamazepine (CBZ), diclofenac (DCF), ibuprofen (IBU) and naproxen (NPX). The study evaluated the removal efficiency of conventional CW systems (CW-control) as well as CW systems operated as closed-circuit MFCs (CW-MFCs) and MECs (CW-MECs). Although a few positive trends were identified for the CW-BES compared to the CW-control (higher average CBZ, DCF and NPX removal by 10-17% in CW-MEC and 5% in CW-MFC), these proved to be not statistically significantly different. Mesoscale experiments with real wastewater could thus not confirm earlier positive effects of CW-BES found under strictly controlled laboratory conditions with synthetic wastewaters.

2101.06266

Parameter inference in a computational model of hemodynamics in pulmonary hypertension

Pulmonary hypertension (PH), defined by a mean pulmonary arterial pressure (mPAP) $>$ 20 mmHg, is characterized by increased pulmonary vascular resistance and decreased pulmonary arterial compliance. There are few measurable biomarkers of PH progression, but a conclusive diagnosis of the disease requires invasive right heart catheterization (RHC). Patient-specific computational models of the cardiovascular system are a potential noninvasive tool for determining additional indicators of disease severity. Using computational modeling, this study quantifies physiological parameters indicative of disease severity in nine PH patients. The model includes all four heart chambers and the pulmonary and systemic circulations. We consider two sets of calibration data: static (systolic \& diastolic values) RHC data and a combination of static and continuous, time-series waveform data. We determine a subset of identifiable parameters for model calibration using sensitivity analyses and multistart inference, and carry out uncertainty quantification post-inference. Results show that additional waveform data enables accurate calibration of the right atrial reservoir and pump function across the PH cohort. Model outcomes, including stroke work and pulmonary resistance-compliance relations, reflect typical right heart dynamics in PH phenotypes. Lastly, we show that estimated parameters agree with previous, non-modeling studies, supporting this type of analysis in translational PH research.

2101.07117

SPRISS: Approximating Frequent $k$-mers by Sampling Reads, and Applications

The extraction of $k$-mers is a fundamental component in many complex analyses of large next-generation sequencing datasets, including reads classification in genomics and the characterization of RNA-seq datasets. The extraction of all $k$-mers and their frequencies is extremely demanding in terms of running time and memory, owing to the size of the data and to the exponential number of $k$-mers to be considered. However, in several applications, only frequent $k$-mers, which are $k$-mers appearing in a relatively high proportion of the data, are required by the analysis. In this work we present SPRISS, a new efficient algorithm to approximate frequent $k$-mers and their frequencies in next-generation sequencing data. SPRISS employs a simple yet powerful reads sampling scheme, which allows to extract a representative subset of the dataset that can be used, in combination with any $k$-mer counting algorithm, to perform downstream analyses in a fraction of the time required by the analysis of the whole data, while obtaining comparable answers. Our extensive experimental evaluation demonstrates the efficiency and accuracy of SPRISS in approximating frequent $k$-mers, and shows that it can be used in various scenarios, such as the comparison of metagenomic datasets and the identification of discriminative $k$-mers, to extract insights in a fraction of the time required by the analysis of the whole dataset.

2101.08346

Automatic prediction of cognitive and functional decline can significantly decrease the number of subjects required for clinical trials in early Alzheimer's disease

INTRODUCTION: Heterogeneity in the progression of Alzheimer's disease makes it challenging to predict the rate of cognitive and functional decline for individual patients. Tools for short-term prediction could help enrich clinical trial designs and focus prevention strategies on the most at-risk patients. METHOD: We built a prognostic model using baseline cognitive scores and MRI-based features to determine which subjects with mild cognitive impairment remained stable and which functionally declined (measured by a two-point increase in CDR-SB) over 2 and 3-year follow-up periods, periods typical of the length of clinical trials. RESULTS: Combining both sets of features yields 77% accuracy (81% sensitivity and 75% specificity) to predict cognitive decline at 2 years (74% accuracy at 3 years with 75% sensitivity and 73% specificity). Using this tool to select trial participants yields a 3.8-fold decrease in the required sample size for a 2-year study (2.8-fold decrease for a 3-year study) for a hypothesized 25% treatment effect to reduce cognitive decline. DISCUSSION: This cohort enrichment tool could accelerate treatment development by increasing power in clinical trials.

2101.11526

Time to revisit the endpoint dilution assay and to replace TCID$_{50}$ and PFU as measures of a virus sample's infection concentration

The infectivity of a virus sample is measured by the infections it causes, via a plaque or focus forming assay (PFU or FFU) or an endpoint dilution (ED) assay (TCID$_{50}$, CCID$_{50}$, EID$_{50}$, etc., hereafter collectively ID$_{50}$). The counting of plaques or foci at a given dilution intuitively and directly provides the concentration of infectious doses in the undiluted sample. However, it has many technical and experimental limitations. For example, it relies on one's judgement in distinguishing between two merged plaques and a larger one, or between small plaques and staining artifacts. In this regard, ED assays are more robust because one need only determine whether infection occurred. The output of the ED assay, the 50% infectious dose (ID$_{50}$), is calculated using either the Spearman-Karber (SK, 1908,1931) or Reed-Muench (RM, 1938) mathematical approximations. However, these are often miscalculated and their ID$_{50}$ approximation is biased. We propose that the PFU and FFU assays be abandoned, and that the measured output of the ED assay, the ID$_{50}$, be replaced by a more useful measure we coined Specific INfections (SIN). We introduce a free, open-source web-application, midSIN, that computes the SIN concentration in a virus sample from a standard ED assay, requiring no changes to current experimental protocols. We demonstrate that the SIN/mL of a sample reliably corresponds to the number of infections the sample will cause per unit volume, and directly relates to the multiplicity of infection. midSIN estimates are shown to be more accurate and robust than those using the RM and SK approximations. The impact of ED plate design choices (dilution factor, replicates per dilution) on measurement accuracy is also explored. The simplicity of SIN as a measure and the greater accuracy of midSIN make them an easy, superior replacement for the PFU, FFU, and ID$_{50}$ measures.

2101.12342

Comment on "A compilation and bioenergetic evaluation of syntrophic microbial growth yields in anaerobic digestion" by Pat\'on, M. and Rodr\'iguez, J. [Water Research 162 (2019), 516-517]

Recent efforts have focused on providing a systematic analysis of syntrophic microbial growth yields. These biokinetic parameters are key to developing an accurate mathematical description of the anaerobic digestion process. The agreement between experimentally determined growth yields and those obtained from bioenergetic estimations is therefore of great interest. Considering five important syntrophic groups, including acetoclastic and hydrogenotrophic methanogens, as well as propionate, butyrate and lactate oxidizers, previous findings suggest that measured and estimated growth yields were consistent only for acetoclastic methanogens. A re-analysis revealed that data are also consistent for lactate oxidizers and hydrogenotrophic methanogens, whereas the limited data available for propionate and butyrate oxidizers are unsupportive of firm conclusions. These results highlight pertinent challenges in the analysis of microbial syntrophy and encourage more accurate measurements of syntrophic microbial growth yields in the future.

2101.12360

Benchmarking real-time monitoring strategies for ethanol production from lignocellulosic biomass

The goal of this paper is to review and critically assess different methods to monitor key process variables for ethanol production from lignocellulosic biomass. Because cellulose-based biofuels cannot yet compete with non-cellulosic biofuels, process control and optimization are of importance to lower the production costs. This study reviews different monitoring schemes, to indicate what the added value of real-time monitoring is for process control. Furthermore, a comparison is made on different monitoring techniques to measure the off-gas, the concentrations of dissolved components in the inlet to the process, the concentrations of dissolved components in the reactor, and the biomass concentration. Finally, soft sensor techniques and available models are discussed, to give an overview of modeling techniques that analyze data, with the aim of coupling the soft sensor predictions to the control and optimization of cellulose to ethanol fermentation. The paper ends with a discussion of future needs and developments.

2102.01521

Pathogenesis, Symptomatology, and Transmission of SARS-CoV-2 through Analysis of Viral Genomics and Structure

The novel coronavirus SARS-CoV-2, which emerged in late 2019, has since spread around the world and infected hundreds of millions of people with coronavirus disease 2019 (COVID-19). While this viral species was unknown prior to January 2020, its similarity to other coronaviruses that infect humans has allowed for rapid insight into the mechanisms that it uses to infect human hosts, as well as the ways in which the human immune system can respond. Here, we contextualize SARS-CoV-2 among other coronaviruses and identify what is known and what can be inferred about its behavior once inside a human host. Because the genomic content of coronaviruses, which specifies the virus's structure, is highly conserved, early genomic analysis provided a significant head start in predicting viral pathogenesis and in understanding potential differences among variants. The pathogenesis of the virus offers insights into symptomatology, transmission, and individual susceptibility. Additionally, prior research into interactions between the human immune system and coronaviruses has identified how these viruses can evade the immune system's protective mechanisms. We also explore systems-level research into the regulatory and proteomic effects of SARS-CoV-2 infection and the immune response. Understanding the structure and behavior of the virus serves to contextualize the many facets of the COVID-19 pandemic and can influence efforts to control the virus and treat the disease.

2102.01883

Effect of stress on cardiorespiratory synchronization of Ironmen athletes

The aim of this paper is to investigate the cardiorespiratory synchronization in athletes subjected to extreme physical stress combined with a cognitive stress tasks. ECG and respiration were measured in 14 athletes before and after the Ironmen competition. Stroop test was applied between the measurements before and after the Ironmen competition to induce cognitive stress. Synchrogram and empirical mode decomposition analysis were used for the first time to investigate the effects of physical stress, induced by the Ironmen competition, on the phase synchronization of the cardiac and respiratory systems of Ironmen athletes before and after the competition. A cognitive stress task (Stroop test) was performed both pre- and post-Ironman event in order to prevent the athletes from cognitively controlling their breathing rates. Our analysis showed that cardiorespiratory synchronization increased post-Ironman race compared to pre-Ironman. The results suggest that the amount of stress the athletes are recovering from post-competition is greater than the effects of the Stroop test. This indicates that the recovery phase after the competition is more important for restoring and maintaining homeostasis, which could be another reason for stronger synchronization.

2102.02250

Dietary Supplements and Nutraceuticals Under Investigation for COVID-19 Prevention and Treatment

Coronavirus disease 2019 (COVID-19) has caused global disruption and a significant loss of life. Existing treatments that can be repurposed as prophylactic and therapeutic agents could reduce the pandemic's devastation. Emerging evidence of potential applications in other therapeutic contexts has led to the investigation of dietary supplements and nutraceuticals for COVID-19. Such products include vitamin C, vitamin D, omega 3 polyunsaturated fatty acids, probiotics, and zinc, all of which are currently under clinical investigation. In this review, we critically appraise the evidence surrounding dietary supplements and nutraceuticals for the prophylaxis and treatment of COVID-19. Overall, further study is required before evidence-based recommendations can be formulated, but nutritional status plays a significant role in patient outcomes, and these products could help alleviate deficiencies. For example, evidence indicates that vitamin D deficiency may be associated with greater incidence of infection and severity of COVID-19, suggesting that vitamin D supplementation may hold prophylactic or therapeutic value. A growing number of scientific organizations are now considering recommending vitamin D supplementation to those at high risk of COVID-19. Because research in vitamin D and other nutraceuticals and supplements is preliminary, here we evaluate the extent to which these nutraceutical and dietary supplements hold potential in the COVID-19 crisis.

2102.02342

Rate-dependent effects of lidocaine on cardiac dynamics: Development and analysis of a low-dimensional drug-channel interaction model

State-dependent Na+ channel blockers are often prescribed to treat cardiac arrhythmias, but many Na+ channel blockers are known to have pro-arrhythmic side effects. While the anti and proarrhythmic potential of a Na+ channel blocker is thought to depend on the characteristics of its rate-dependent block, the mechanisms linking these two attributes are unclear. Furthermore, how specific properties of rate-dependent block arise from the binding kinetics of a particular drug is poorly understood. Here, we examine the rate-dependent effects of the Na+ channel blocker lidocaine by constructing and analyzing a novel drug-channel interaction model. First, we identify the predominant mode of lidocaine binding in a 24 variable Markov model for lidocaine-Na+ channel interaction by Moreno et al. We then develop a novel 3-variable lidocaine-Na+ channel interaction model that incorporates only the predominant mode of drug binding. Our low-dimensional model replicates the extensive voltage-clamp data used to parameterize the Moreno et al. model. Furthermore, the effects of lidocaine on action potential upstroke velocity and conduction velocity in our model are similar to those predicted by the Moreno et al. model. By exploiting the low-dimensionality of our model, we derive an algebraic expression for level of rate-dependent block as a function of pacing frequency, restitution properties, diastolic and plateau potentials, and drug binding rate constants. Our model predicts that the level of rate-dependent block is sensitive to alterations in restitution properties and increases in diastolic potential, but it is insensitive to variations in the shape of the action potential waveform and lidocaine binding rates.

2102.02412

Sarc-Graph: Automated segmentation, tracking, and analysis of sarcomeres in hiPSC-derived cardiomyocytes

A better fundamental understanding of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) has the potential to advance applications ranging from drug discovery to cardiac repair. Automated quantitative analysis of beating hiPSC-CMs is an important and fast developing component of the hiPSC-CM research pipeline. Here we introduce "Sarc-Graph," a computational framework to segment, track, and analyze sarcomeres in fluorescently tagged hiPSC-CMs. Our framework includes functions to segment z-discs and sarcomeres, track z-discs and sarcomeres in beating cells, and perform automated spatiotemporal analysis and data visualization. In addition to reporting good performance for sarcomere segmentation and tracking with little to no parameter tuning and a short runtime, we introduce two novel analysis approaches. First, we construct spatial graphs where z-discs correspond to nodes and sarcomeres correspond to edges. This makes measuring the network distance between each sarcomere (i.e., the number of connecting sarcomeres separating each sarcomere pair) straightforward. Second, we treat tracked and segmented components as fiducial markers and use them to compute the approximate deformation gradient of the entire tracked population. This represents a new quantitative descriptor of hiPSC-CM function. We showcase and validate our approach with both synthetic and experimental movies of beating hiPSC-CMs. By publishing Sarc-Graph, we aim to make automated quantitative analysis of hiPSC-CM behavior more accessible to the broader research community.

2102.03180

Fine-tuning neural excitation/inhibition for tailored ketamine use in treatment-resistant depression

The glutamatergic modulator ketamine has been shown to rapidly reduce depressive symptoms in patients with treatment-resistant major depressive disorder (TRD). Although its mechanisms of action are not fully understood, changes in cortical excitation/inhibition (E/I) following ketamine administration are well documented in animal models and could represent a potential biomarker of treatment response. Here, we analyse neuromagnetic virtual electrode timeseries collected from the primary somatosensory cortex in 18 unmedicated patients with TRD and in an equal number of age-matched healthy controls during a somatosensory 'airpuff' stimulation task. These two groups were scanned as part of a clinical trial of ketamine efficacy under three conditions: a) baseline; b) 6-9 hours following subanesthetic ketamine infusion; and c) 6-9 hours following placebo-saline infusion. We obtained estimates of E/I interaction strengths by using Dynamic Causal Modelling (DCM) on the timeseries, thereby allowing us to pinpoint, under each scanning condition, where each subject's dynamics lie within the Poincar\'e diagram - as defined in dynamical systems theory. We demonstrate that the Poincar\'e diagram offers classification capability for TRD patients, in that the further the patients' coordinates were shifted (by virtue of ketamine) toward the stable (top-left) quadrant of the Poincar\'e diagram, the more their depressive symptoms improved. The same relationship was not observed by virtue of a placebo effect - thereby verifying the drug-specific nature of the results. We show that the shift in neural dynamics required for symptom improvement necessitates an increase in both excitatory and inhibitory coupling. We present accompanying MATLAB code made available in a public repository, thereby allowing for future studies to assess individually-tailored treatments of TRD.

2102.03676

An overview of continuous and discrete phasor analysis of binned or time-gated periodic decays

Time-resolved analysis of periodically excited luminescence decays by the phasor method in the presence of time-gating or binning is revisited. Analytical expressions for discrete configurations of square gates are derived and the locus of the phasors of such modified periodic single-exponential decays is compared to the canonical universal semicircle. The effects of IRF offset, decay truncation and gate shape are also discussed. Finally, modified expressions for the phase and modulus lifetimes are provided for some simple cases. A discussion of a modified phasor calibration approach is presented.

2102.04194

GC-MS Profile of Diodella sarmentosa (SW) Bacigalupo El Cabral ex Borhidi Ethanol Leaf Extract and its Total Dehydrogenase Inhibitory Potential

Phytochemical composition of ethanol leaf extract of Diodella sarmentosa was profiled with GC-MS and the inhibitory property of the extract against total microbial dehydrogenases were assessed. The major constituents of the extract were squalene (29.50%), Phytol (24.68%), phenol, 3-pentadecyl- (18.58%), 1-Butanol, 3-methyl- (9.09%) and n-Hexadecanoic acid (7.78%). The minimum inhibitory concentration (MIC) of the extract against broad spectrum of microbial population was assessed. Bacillus subtilis, Candidas spp, and Penicillium spp were more sensitive to the treatment and thus; were further investigated using Dehydrogenase activity assay method. Total dehydrogenase activities of Bacillus subtilis, Candidas spp, and Penicillium spp at the extract concentration range of 0 to 2000mg/ml were progressively inhibited at increasing extract concentrations. The threshold inhibitory concentrations (IC50) of the extracts against Candidas spp, Penicillium spp and Bacillus subtilis were 275micro. g/ml, 322 micro. g/ml and 411 micro. g/ml respectively. Our findings suggested the extract as a useful source of antimicrobial phytochemicals for pharmaceutical use.

2102.04882

Unmasking the mask studies: why the effectiveness of surgical masks in preventing respiratory infections has been underestimated

Face masks have been widely used as a protective measure against COVID-19. However, pre-pandemic empirical studies have produced mixed statistical results on the effectiveness of masks against respiratory viruses. The implications of the studies' recognized limitations have not been quantitatively and statistically analyzed, leading to confusion regarding the effectiveness of masks. Such confusion may have contributed to organizations such as the WHO and CDC initially not recommending that the general public wear masks. Here we show that when the adherence to mask-usage guidelines is taken into account, the empirical evidence indicates that masks prevent disease transmission: all studies we analyzed that did not find surgical masks to be effective were under-powered to such an extent that even if masks were 100% effective, the studies in question would still have been unlikely to find a statistically significant effect. We also provide a framework for understanding the effect of masks on the probability of infection for single and repeated exposures. The framework demonstrates that more frequently wearing a mask provides super-linearly compounding protection, as does both the susceptible and infected individual wearing a mask. This work shows (1) that both theoretical and empirical evidence is consistent with masks protecting against respiratory infections and (2) that nonlinear effects and statistical considerations regarding the percentage of exposures for which masks are worn must be taken into account when designing empirical studies and interpreting their results.

2102.05326

Evaluation of the Penetration Process of Fluorescent Collagenase Nanocapsules in a 3D Collagen Gel

One of the major limitations of nanomedicine is the scarce penetration of nanoparticles in tumoral tissues. These constrains have been tried to be solved by different strategies, such as the employ of polyethyleneglycol (PEG) to avoid the opsonization or reducing the extracellular matrix (ECM) density. Our research group has developed some strategies to overcome these limitations such as the employ of pH-sensitive collagenase nanocapsules for the digestion of the collagen-rich extracellular matrix present in most of tumoral tissues. However, a deeper understanding of physicochemical kinetics involved in the nanocapsules degradation process is needed to understand the nanocapsule framework degradation process produced during the penetration in the tissue. For this, in this work it has been employed a double-fluorescent labelling strategy of the polymeric enzyme nanocapsule as a crucial chemical tool which allowed the analysis of nanocapsules and free collagenase during the diffusion process throughout a tumour-like collagen matrix. This extrinsic label strategy provides far greater advantages for observing biological processes. For the detection of enzyme, collagenase has been labelled with fluorescein Isothiocyanate (FITC), whereas the nanocapsule surface was labelled with rhodamine Isothiocyanate (RITC). Thus, it has been possible to monitor the hydrolysis of nanocapsules and their diffusion throughout a thick 3D Collagen gel during the time, obtaining a detailed temporal evaluation of the pH-sensitive collagenase nanocapsule behaviour. These collagenase nanocapsules displayed a high enzymatic activity in low concentrations at acidic pH, and their efficiency to penetrate into tissue models pave the way to a wide range of possible nanomedical applications, especially in cancer therapy.

2102.05452

From sleep medicine to medicine during sleep: A clinical perspective

Sleep has a profound influence on the physiology of body systems and biological processes. Molecular studies have shown circadian-regulated shifts in protein expression patterns across human tissues, further emphasizing the unique functional, behavioral and pharmacokinetic landscape of sleep. Thus, many pathological processes are also expected to exhibit sleep-specific manifestations. Nevertheless, sleep is seldom utilized for the study, detection and treatment of non-sleep-specific pathologies. Modern advances in biosensor technologies have enabled remote, non-invasive recording of a growing number of physiologic parameters and biomarkers. Sleep is an ideal time frame for the collection of long and clean physiological time series data which can then be analyzed using data-driven algorithms such as deep learning. In this perspective paper, we aim to highlight the potential of sleep as an auspicious time for diagnosis, management and therapy of nonsleep-specific pathologies. We introduce key clinical studies in selected medical fields, which leveraged novel technologies and the advantageous period of sleep to diagnose, monitor and treat pathologies. We then discuss possible opportunities to further harness this new paradigm and modern technologies to explore human health and disease during sleep and to advance the development of novel clinical applications: From sleep medicine to medicine during sleep.

2102.06178

Structural identifiability analysis of PDEs: A case study in continuous age-structured epidemic models

Computational and mathematical models rely heavily on estimated parameter values for model development. Identifiability analysis determines how well the parameters of a model can be estimated from experimental data. Identifiability analysis is crucial for interpreting and determining confidence in model parameter values and to provide biologically relevant predictions. Structural identifiability analysis, in which one assumes data to be noiseless and arbitrarily fine-grained, has been extensively studied in the context of ordinary differential equation (ODE) models, but has not yet been widely explored for age-structured partial differential equation (PDE) models. These models present additional difficulties due to increased number of variables and partial derivatives as well as the presence of boundary conditions. In this work, we establish a pipeline for structural identifiability analysis of age-structured PDE models using a differential algebra framework and derive identifiability results for specific age-structured models. We use epidemic models to demonstrate this framework because of their wide-spread use in many different diseases and for the corresponding parallel work previously done for ODEs. In our application of the identifiability analysis pipeline, we focus on a Susceptible-Exposed-Infected model for which we compare identifiability results for a PDE and corresponding ODE system and explore effects of age-dependent parameters on identifiability. We also show how practical identifiability analysis can be applied in this example.

2102.07610

Application of Quantitative Systems Pharmacology to guide the optimal dosing of COVID-19 vaccines

Optimal use and distribution of Covid-19 vaccines involves adjustments of dosing. Due to the rapidly-evolving pandemic, such adjustments often need to be introduced before full efficacy data are available. As demonstrated in other areas of drug development, quantitative systems pharmacology (QSP) is well placed to guide such extrapolation in a rational and timely manner. Here we propose for the first time how QSP can be applied real time in the context of COVID-19 vaccine development.

2102.07653

Prediction of Influenza A virus infections in humans using an Artificial Neural Network learning approach

The Influenza type A virus can be considered as one of the most severe viruses that can infect multiple species with often fatal consequences to the hosts. The Haemagglutinin (HA) gene of the virus has the potential to be a target for antiviral drug development realised through accurate identification of its sub-types and possible the targeted hosts. In this paper, to accurately predict if an Influenza type A virus has the capability to infect human hosts, by using only the HA gene, is therefore developed and tested. The predictive model follows three main steps; (i) decoding the protein sequences into numerical signals using EIIP amino acid scale, (ii) analysing these sequences by using Discrete Fourier Transform (DFT) and extracting DFT-based features, (iii) using a predictive model, based on Artificial Neural Networks and using the features generated by DFT. In this analysis, from the Influenza Research Database, 30724, 18236 and 8157 HA protein sequences were collected for Human, Avian and Swine, respectively. Given this set of the proteins, the proposed method yielded 97.36% (+- 0.04%), 97.26% (+- 0.26%), 0.978 (+- 0.004), 0.963 (+- 0.005) and 0.945 (+- 0.005) for the training accuracy validation accuracy, precision, recall and Mathews Correlation Coefficient (MCC) respectively, based on a 10-fold cross-validation. The classification model generated by using one of the largest dataset, if not the largest, yields promising results that could lead to early detection of such species and help develop precautionary measurements for possible human infections.

2102.07743

The effects of temperature acclimation on swimming performance in the pelagic Mahi-mahi (Coryphaena hippurus)

Mahi-mahi (Coryphaena hippurus) are a highly migratory pelagic fish, but little is known about what environmental factors drive their broad distribution. This study examined how temperature influences aerobic scope and swimming performance in mahi. Mahi were acclimated to four temperatures spanning their natural range (20, 24, 28, and 32{\deg}C; 5-27 days) and critical swimming speed (Ucrit), metabolic rates, aerobic scope, and optimal swim speed were measured. Aerobic scope and Ucrit were highest in 28{\deg}C-acclimated fish. 20{\deg}C-acclimated mahi experienced significantly decreased aerobic scope and Ucrit relative to 28{\deg}C-acclimated fish (57 and 28% declines, respectively). 32{\deg}C-acclimated mahi experienced increased mortality and a significant 23% decline in Ucrit, and a trend for a 26% decline in factorial aerobic scope relative to 28{\deg}C-acclimated fish. Absolute aerobic scope showed a similar pattern to factorial aerobic scope. Our results are generally in agreement with previously observed distribution patterns for wild fish. Although thermal performance can vary across life stages, the highest tested swim performance and aerobic scope found in the present study (28{\deg}C), aligns with recently observed habitat utilization patterns for wild mahi and could be relevant for climate change predictions.

2102.09335

Metabolic alterations caused by smoking: the use of 1H-NMR in blood plasma analysis to unravel underlying mechanisms of lung cancers leading risk factor

Nowadays, the screening methods for the early detection of lung cancer struggle with several limitations such as many false positive results and low sensitivity. The detection of specific biomarkers is of high interest to complement these conventional screening methods. The objective of this study is to prove the power of 1H-NMR in metabolomics for the detection of smoking behavior, which is the leading risk factor for lung cancer, and as such gain more insights in the metabolic alterations that are caused by smoking. In this research, 1H-NMR spectra of human blood plasma samples were divided in 110 integration regions, from which the integration values were used to train an OPLS-DA classification model that underwent further data reduction. Results show that a classification model could discriminate between individuals based on their smoking status with a sensitivity of 96 percent and a specificity of 94 percent. This study also demonstrates that by performing a pathway-specific variable reduction of almost 50 percent, the sensitivity and specificity of the model almost remains the same. To conclude, 1H-NMR analyses show that the bloods metabolic profile of a smoker is altered compared to that of a non-smoker. Also, pathway-specific variable reduction shows great potential to perform overall data reduction. This workflow could be interesting to apply in the identification of lung cancer, to potentially detect specific biomarkers.

2102.11053

Interpretation of the Area Under the ROC Curve for Risk Prediction Models

The area under the curve (AUC) of the receiver operating characteristics curve (ROC) evaluates the separation between patients and nonpatients or discrimination. For risk prediction models these risk distributions can be derived from the population risk distribution so are not independent as in diagnosis. A ROC curve AUC formula based on the underlying population risk distribution clarifies how discrimination is defined mathematically and that generation of the equivalent c-statistic effects a Monte Carlo integration of the formula. For a selection of continuous risk distributions, exact analytic formulas or numerical results for the ROC curve AUC and overlap measure are presented and demonstrate a linear or near-linear dependence on their standard deviation. The ROC curve AUC is also shown to be highly dependent on the mean population risk, a distinction from the independence from disease prevalence for diagnostic tests. The converse of discrimination, overlap, has been quantified by the overlap measure, which appears to provide equivalent information. As achieving wider population risk distributions is the goal of risk prediction modeling for clinical risk stratification, interpreting the ROC curve AUC as a measure of dispersion, rather than discrimination, when comparing risk prediction models may be more relevant.

2102.11629

Bayesian uncertainty quantification for data-driven equation learning

Equation learning aims to infer differential equation models from data. While a number of studies have shown that differential equation models can be successfully identified when the data are sufficiently detailed and corrupted with relatively small amounts of noise, the relationship between observation noise and uncertainty in the learned differential equation models remains unexplored. We demonstrate that for noisy data sets there exists great variation in both the structure of the learned differential equation models as well as the parameter values. We explore how to combine data sets to quantify uncertainty in the learned models, and at the same time draw mechanistic conclusions about the target differential equations. We generate noisy data using a stochastic agent-based model and combine equation learning methods with approximate Bayesian computation (ABC) to show that the correct differential equation model can be successfully learned from data, while a quantification of uncertainty is given by a posterior distribution in parameter space.

2102.11750

The tipping effect of delayed interventions on the evolution of COVID-19 incidence

We combine infectious disease transmission and the non-pharmaceutical intervention (NPI) response to disease incidence into one closed model consisting of two coupled delay differential equations for the incidence rate and the time-dependent reproduction number. The model contains three free parameters, the initial reproduction number, the intervention strength, and the response delay relative to the time of infection. The NPI response is modeled by assuming that the rate of change of the reproduction number is proportional to the negative deviation of the incidence rate from an intervention threshold. This delay dynamical system exhibits damped oscillations in one part of the parameter space, and growing oscillations in another, and these are separated by a surface where the solution is a strictly periodic nonlinear oscillation. For parameters relevant for the COVID-19 pandemic, the tipping transition from damped to growing oscillations occurs for response delays of the order of one week, and suggests that effective control and mitigation of successive epidemic waves cannot be achieved unless NPIs are implemented in a precautionary manner, rather than merely as a response to the present incidence rate.

2103.00182

Verification of an agent-based disease model of human mycobacterium tuberculosis infection

Agent-Based Models are a powerful class of computational models widely used to simulate complex phenomena in many different application areas. However, one of the most critical aspects, poorly investigated in the literature, regards an important step of the model credibility assessment: solution verification. This study overcomes this limitation by proposing a general verification framework for Agent-Based Models that aims at evaluating the numerical errors associated with the model. A step-by-step procedure, which consists of two main verification studies (deterministic and stochastic model verification), is described in detail and applied to a specific mission critical scenario: the quantification of the numerical approximation error for UISS-TB, an ABM of the human immune system developed to predict the progression of pulmonary tuberculosis. Results provide indications on the possibility to use the proposed model verification workflow to systematically identify and quantify numerical approximation errors associated with UISS-TB and, in general, with any other ABMs.

2103.00408

Absolute quantification of real-time PCR data with stage signal difference analysis

Real-time PCR, or Real-time Quantitative PCR (qPCR) is an effective approach to quantify nucleic acid samples. Given the complicated reaction system along with thermal cycles, there has been long-term confusion on accurately calculating the initial nucleic acid amounts from the fluorescence signals. Although many improved algorithms had been proposed, the classical threshold method is still the primary choice in the routine application. In this study, we will first illustrate the origin of the linear relationship between the threshold value and logarithm of the initial nucleic acid amount by reconstructing the PCR reaction process with stochastic simulations. We then develop a new method for the absolute quantification of nucleic acid samples with qPCR. By monitoring the fluorescence signal changes in every stage of the thermal cycle, we are able to calculate a representation of the step-wise efficiency change. This is the first work calculated PCR efficiency change directly from the fluorescence signal, without fitting or sophisticated analysis. Our results revealed that the efficiency change during the PCR process is complicated and can not be modeled simply by monotone function model. Based on the calculated efficiency, we illustrate a new absolute qPCR analysis method for accurately determining nucleic acid amount. The efficiency problem is completely avoided in this new method.

2103.00761

Betti Curves of Rank One Symmetric Matrices

Betti curves of symmetric matrices were introduced in (Giusti et. al., 2015) as a new class of matrix invariants that depend only on the relative ordering of matrix entries. These invariants are computed using persistent homology, and can be used to detect underlying structure in biological data that may otherwise be obscured by monotone nonlinearities. Here we prove three theorems that fully characterize the Betti curves of rank 1 symmetric matrices. We then illustrate how these Betti curve signatures arise in natural data obtained from calcium imaging of neural activity in zebrafish.

2103.01014

Beat-to-Beat Fetal Heart Rate Analysis Using Portable Medical Device and Wavelet Transformation Technique

A beat-to-beat Tele-fetal Monitoring and comparison with clinical data are studied with a wavelet transformation approach. Tele-fetal monitoring is a big progress toward a wearable medical device for a pregnant woman capable of obtaining prenatal care at home. We apply a wavelet transformation algorithm for fetal cardiac monitoring using a portable fetal Doppler medical device. Choosing an appropriate mother wavelet, 85 different mother wavelets are investigated. The efficiency of the proposed method is evaluated using two data sets including public and clinical. From publicly available data on PhysioBank, and simultaneous clinical measurement, we prove that the comparison between obtained fetal heart rate by the algorithm and the baselines yields a promising accuracy beyond 95%. Finally, we conclude that the proposed algorithm would be a robust technique for any similar tele-fetal monitoring approach.

2103.02723

Identification and Development of Therapeutics for COVID-19

After emerging in China in late 2019, the novel Severe acute respiratory syndrome-like coronavirus 2 (SARS-CoV-2) spread worldwide and as of early 2021, continues to significantly impact most countries. Only a small number of coronaviruses are known to infect humans, and only two are associated with the severe outcomes associated with SARS-CoV-2: Severe acute respiratory syndrome-related coronavirus, a closely related species of SARS-CoV-2 that emerged in 2002, and Middle East respiratory syndrome-related coronavirus, which emerged in 2012. Both of these previous epidemics were controlled fairly rapidly through public health measures, and no vaccines or robust therapeutic interventions were identified. However, previous insights into the immune response to coronaviruses gained during the outbreaks of severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) have proved beneficial to identifying approaches to the treatment and prophylaxis of novel coronavirus disease 2019 (COVID-19). A number of potential therapeutics against SARS-CoV-2 and the resultant COVID-19 illness were rapidly identified, leading to a large number of clinical trials investigating a variety of possible therapeutic approaches being initiated early on in the pandemic. As a result, a small number of therapeutics have already been authorized by regulatory agencies such as the Food and Drug Administration (FDA) in the United States, and many other therapeutics remain under investigation. Here, we describe a range of approaches for the treatment of COVID-19, along with their proposed mechanisms of action and the current status of clinical investigation into each candidate. The status of these investigations will continue to evolve, and this review will be updated as progress is made.

2103.03512

Amino acid frequency and domain features serve well for random forest based classification of thermophilic and mesophilic protein; a case study on serine proteases

Thermostability is an important prerequisite for enzymes employed for industrial applications. Several machine learning based models have thus been formulated for protein classification based on this particular trait. These models have employed features derived from sequences, structures or both resulting in a >93% accuracy based on a 10-fold cross-validation. Besides using various proteins from a wide range of organisms, such studies also rely on hundreds of features. In the present study, an enzyme specific classification model was created using significantly less number of features that provides a similar accuracy of classification for thermophilic and non-thermophilic enzyme serine proteases. For building the classifier, 219 thermophilic and 200 mesophilic bacterial genomes were mined for their respective serine protease sequences. Features were extracted for 800 sequences followed by feature selection. We deployed a random forest based classifier that identified thermophilic and non-thermophilic serine proteases with an accuracy of 95.71%. Knowledge of thermostability along with amino acid positional shifts can be vital for downstream protein engineering techniques. Thus, to emphasize the real time application of the enzyme specific classification model, a web platform has been designed. Combining the sequence data and the classification model, this prototype can allow users to align their query serine protease sequence against the custom database and identify its thermophilic nature.

2103.10033

Quantitative predictions of neoadjuvant chemotherapy effects in breast cancer by individual patient data assimililation

Neoadjuvant chemotherapy has been used for breast cancer aiming at downgrading before surgery. In this article we propose a new quantitative analysis of the effects of the neoadjuvant therapy to obtain numerical, personalized, predictions on the shrinkage of the tumor size after the drug doses, by data assimilation of the individual patient. The algorithm has been validated by a sample of 37 patients with histological diagnosis of locally advanced primary breast carcinoma. The biopsy specimen, the initial tumor size and its reduction after each treatment were known for all patients. We find that: a) the measure of tumor size at the diagnosis and after the first dose permits to predict the size reduction for the follow up; b) the results are in agreement with our data sample, within 10-20 %, for about 90% of the patients. The quantitative indications suggest the best time for surgery. The analysis is patient oriented, weakly model dependent and can be applied to other cancer phenotypes.

2103.10795

Sleep quality, chronotype and social jet lag of adolescents from a population with a very late chronotype

Sleep disorders can be a negative factor both for learning as for the mental and physical development of adolescents. It has been shown that, in many populations, adolescents tend to have a poor sleep quality, and a very late chronotype. Furthermore, these features peak at adolescence, in the sense that adults tend to sleep better and have an earlier chronotype. But what happens when we consider adolescents in a population where already adults have poor sleep quality and a very late chronotype? We have conducted two non-clinical studies in the city of Bariloche, Argentina aimed at measuring sleep quality, chronotype, and social jet lag, using the Pittsburgh and Munich questionnaires. These were administered individually to groups of high school students, as well as to smaller samples of adults and preadolescents, in order to study differences between adolescents and these groups. The results show that in this population sleep quality is much poorer than in most other healthy populations recorded elsewhere. Furthermore, sleep quality is consistently worse for adolescents than for the other groups. The difference with adults seems to be due mainly to increased daytime sleepiness and sleep latency, whereas the difference with preadolescents seems to be due mainly to shorter sleep duration. We also found that the chronotypes of all the groups are very late, with a peak at an age between 18 and 24 ys. Social jet lag and sleep onset latency are also large, and they peak at adolescence, which suggests that they might be closely related to the large prevalence of poor sleep quality that we find in adolescents.

2103.11461

Development and evaluation of copper-containing mesoporous bioactive glasses for bone defects therapy

Mesoporous bioactive glasses, MBG, are gaining increasing interest in the design of new biomaterials for bone defects treatment. An important research trend to enhance their biological behavior is the inclusion of moderate amounts of oxides with therapeutical action such as CuO. In this paper, MBG with composition were synthesized, investigating the influence of the CuO content and some synthesis parameters in their properties. Two batch were developed; first one using HCl as catalyst and chlorides as CaO and CuO precursors, second one, using HNO3 and nitrates. MBG of chlorides batch exhibited calcium/copper phosphate nanoparticles, between 10 and 20 nm. Nevertheless, CuO- containing MBG of nitrates batch showed nuclei of metallic copper nanoparticles larger than 50 nm and quicker in vitro bioactive responses. Thus, they were coated by an apatite-like layer after 24 h soaked in simulated body fluid, a remarkably short period for MBG containing up to 5 % of CuO. A model, focused in the copper location in the glass network, was proposed to relate nanostructure and in vitro behaviour. Moreover, after 24 h in MEM or THB culture media, all the MBG released therapeutic amounts of Ca2+ and Cu2+ ions. Because the quick bioactive response in SBF, the capacity to host biomolecules in their pores and to release therapeutic concentrations of Ca2+ and Cu2+ ions, MBG of the nitrate batch are considered as excellent biomaterials for bone regeneration.

2103.11664

OnionNet-2: A Convolutional Neural Network Model for Predicting Protein-Ligand Binding Affinity based on Residue-Atom Contacting Shells

One key task in virtual screening is to accurately predict the binding affinity ($\triangle$$G$) of protein-ligand complexes. Recently, deep learning (DL) has significantly increased the predicting accuracy of scoring functions due to the extraordinary ability of DL to extract useful features from raw data. Nevertheless, more efforts still need to be paid in many aspects, for the aim of increasing prediction accuracy and decreasing computational cost. In this study, we proposed a simple scoring function (called OnionNet-2) based on convolutional neural network to predict $\triangle$$G$. The protein-ligand interactions are characterized by the number of contacts between protein residues and ligand atoms in multiple distance shells. Compared to published models, the efficacy of OnionNet-2 is demonstrated to be the best for two widely used datasets CASF-2016 and CASF-2013 benchmarks. The OnionNet-2 model was further verified by non-experimental decoy structures from docking program and the CSAR NRC-HiQ data set (a high-quality data set provided by CSAR), which showed great success. Thus, our study provides a simple but efficient scoring function for predicting protein-ligand binding free energy.

2103.12481

Multifunctional antibiotic- and zinc-containing mesoporous bioactive glass scaffolds to fight bone infection

Bone regeneration is a clinical challenge that requires multiple approaches. Sometimes, it also includes the development of new osteogenic and antibacterial biomaterials to treat the occurrence of possible infection processes derived from surgery. This study evaluates the antibacterial properties of meso-macroporous scaffolds coated with gelatin and based on a bioactive glass and after being doped with 4% ZnO (4ZN-GE) and loaded with saturated and minimally inhibitory concentrations of one of the antibiotics levofloxacin (LEVO), vancomycin (VANCO), rifampicin (RIFAM) or gentamicin (GENTA). After the physicochemical characterization of the materials, inorganic ion and antibiotic release studies were performed from the scaffolds. In addition, molecular modeling allowed the determination of electrostatic potential density maps and hydrogen bonds of the antibiotics and the glass matrix. In vitro antibacterial studies (in plankton, inhibition halos and biofilm destruction) with S. aureus and E. coli as model bacteria showed a synergistic effect of zinc ions and antibiotics. The effect was especially noticeable in planktonic cultures of S. aureus with 4ZN-GE scaffolds loaded with VANCO, LEVO or RIFAM and in cultures of E. coli with LEVO or GENTA. Furthermore, S. aureus biofilms were completely destroyed by 4ZN-GE scaffolds loaded with VANCO, LEVO or RIFAM and total destruction of E. coli biofilm was achieved with 4ZN-GE scaffolds loaded with GENTA or LEVO. This approach could be an important step in the fight against microbial resistance and provide much needed options for the treatment of bone infection.

2103.12822

Putting the dynamic pathosome in practice: a novel way of analyzing longitudinal data

Previously we have developed the concept of the dynamic pathosome, which suggests that individual patterns of phenotype development, i.e., phenotypic trajectories, contain more information than is commonly appreciated and that a phenotype's past trajectory predicts its future development. In this article, we present a pathosome-inspired approach to analyzing longitudinal data by functional linear models. We demonstrate how to use this approach and compare it with classical linear models on data from the Czech section of the European Longitudinal Study of Pregnancy and Childhood (ELSPAC). Our results show that functional linear models explain more observed variance in age at menarche from height and weight data than the commonly used approaches. Furthermore, we demonstrate that functional linear models can be used to identify crucial time points that can be used to create linear models achieving almost the same performance as functional linear models. In addition, we use data from the Berkeley growth study (BGS) to demonstrate that growth trajectories from birth to 15 years can be used to explain 97% of observed variance of height at 18 years, thus supporting the notion that a phenotype's past trajectory affects its future course. Overall, this article presents experimental support for the concept of the dynamic pathosome and presents a method that can be used as a powerful tool for analyzing quantitative longitudinal data.

2103.15572

Inferring, comparing and exploring ecological networks from time-series data through R packages constructnet, disgraph and dynet

Network inference is a major field of interest for the ecological community, especially in light of the high cost and difficulty of manual observation, and easy availability of remote, long term monitoring data. In addition, comparing across similar network structures, especially with spatial, environmental, or temporal variability and, simulating processes on networks to create toy models and hypotheses - are topics of considerable interest to the researchers. A large number of methods are being developed in the network science community to achieve these objectives but either don't have their code available or an implementation in R, the language preferred by ecologists and other biologists. We provide a suite of three packages which will provide a central suite of standardized network inference methods from time-series data (constructnet), distance metrics (disgraph) and (process) simulation models (dynet) to the growing R network analysis environment and would help ecologists and biologists to perform and compare methods under one roof. These packages are implemented in a coherent, consistent framework - making comparisons across methods and metrics easier. We hope that these tools in R will help increase the accessibility of network tools to ecologists and other biologists, who the language for most of their analysis.

2104.01468

Neural Representations of Cryo-EM Maps and a Graph-Based Interpretation

Advances in imagery at atomic and near-atomic resolution, such as cryogenic electron microscopy (cryo-EM), have led to an influx of high resolution images of proteins and other macromolecular structures to data banks worldwide. Producing a protein structure from the discrete voxel grid data of cryo-EM maps involves interpolation into the continuous spatial domain. We present a novel data format called the neural cryo-EM map, which is formed from a set of neural networks that accurately parameterize cryo-EM maps and provide native, spatially continuous data for density and gradient. As a case study of this data format, we create graph-based interpretations of high resolution experimental cryo-EM maps. Normalized cryo-EM map values interpolated using the non-linear neural cryo-EM format are more accurate, consistently scoring less than 0.01 mean absolute error, than a conventional tri-linear interpolation, which scores up to 0.12 mean absolute error. Our graph-based interpretations of 115 experimental cryo-EM maps from 1.15 to 4.0 Angstrom resolution provide high coverage of the underlying amino acid residue locations, while accuracy of nodes is correlated with resolution. The nodes of graphs created from atomic resolution maps (higher than 1.6 Angstroms) provide greater than 99% residue coverage as well as 85% full atomic coverage with a mean of than 0.19 Angstrom root mean squared deviation (RMSD). Other graphs have a mean 84% residue coverage with less specificity of the nodes due to experimental noise and differences of density context at lower resolutions. This work may be generalized for transforming any 3D grid-based data format into non-linear, continuous, and differentiable format for the downstream geometric deep learning applications.

2104.01554

Finding Nano-\"Otzi: Semi-Supervised Volume Visualization for Cryo-Electron Tomography

Cryo-Electron Tomography (cryo-ET) is a new 3D imaging technique with unprecedented potential for resolving submicron structural detail. Existing volume visualization methods, however, cannot cope with its very low signal-to-noise ratio. In order to design more powerful transfer functions, we propose to leverage soft segmentation as an explicit component of visualization for noisy volumes. Our technical realization is based on semi-supervised learning where we combine the advantages of two segmentation algorithms. A first weak segmentation algorithm provides good results for propagating sparse user provided labels to other voxels in the same volume. This weak segmentation algorithm is used to generate dense pseudo labels. A second powerful deep-learning based segmentation algorithm can learn from these pseudo labels to generalize the segmentation to other unseen volumes, a task that the weak segmentation algorithm fails at completely. The proposed volume visualization uses the deep-learning based segmentation as a component for segmentation-aware transfer function design. Appropriate ramp parameters can be suggested automatically through histogram analysis. Finally, our visualization uses gradient-free ambient occlusion shading to further suppress visual presence of noise, and to give structural detail desired prominence. The cryo-ET data studied throughout our technical experiments is based on the highest-quality tilted series of intact SARS-CoV-2 virions. Our technique shows the high impact in target sciences for visual data analysis of very noisy volumes that cannot be visualized with existing techniques.

2104.01649

Mesoporous silica nanoparticles containing silver as novel antimycobacterial agents against Mycobacterium tuberculosis

Tuberculosis remains today a major public health issue with a total of 9 million new cases and 2 million deaths annually. The lack of an effective vaccine and the increasing emergence of new strains of Mycobacterium tuberculosis (Mtb) highly resistant to antibiotics, anticipate a complicated scenario in the near future. The use of nanoparticles features as an alternative to antibiotics in tackling this problem due to their potential effectiveness in resistant bacterial strains. In this context, silver nanoparticles have demonstrated high bactericidal efficacy, although their use is limited by their relatively high toxicity, which calls for the design of nanocarriers that allow silver based nanoparticles to be safely delivered to the target cells or tissues. In this work mesoporous silica nanoparticles are used as carriers of silver based nanoparticles as antimycobacterial agent against Mtb. Two different synthetic approaches have been used to afford, on the one hand, a 2D hexagonal mesoporous silica nanosystem which contains silver bromide nanoparticles distributed all through the silica network and, on the other hand, a core@shell nanosystem with metallic silver nanoparticles as core and mesoporous silica shell in a radial mesoporous rearrangement. Both materials have demonstrated good antimycobacterial capacity in in vitro test using Mtb, being lower the minimum inhibitory concentration for the nanosystem which contains silver bromide. Therefore, the interaction of this material with the mycobacterial cell has been studied by cryo-electron microscopy, establishing a direct connection between the antimycobactericidal effect observed and the damage induced in the cell envelope.

2104.02023

Utilizing a Mathematical Model to Estimate Abortion Decline Scenario

Abortion is one of the biggest causes of maternal deaths, accounting for 15% of maternal deaths in Southeast Asia. The increase in and effectiveness of using contraception are still considered to be the effective method to reduce abortion rate. Data pertaining to abortion incidence and effective efforts to reduce abortion rate in Indonesia is limited and difficult to access. Meanwhile such supporting information is necessary to enable the planning and evaluation of abortion control programs. This paper exemplifies the use of a mathematical model to explain an abortion decline scenario. The model employs determinants proposed by Bongaarts, which include average reproductive period, contraceptive prevalence and effectiveness, total fertility rate (TFR), and intended total fertility rate (ITFR), as well as birth and abortion intervals. The data used is from the 1991-2007 Indonesian Demography and Health Survey (Survei Demografi dan Kesehatan Indonesia/SDKI), and the unit of analysis is women who had been married and aged 15-49 years old. Based on the current contraceptive prevalence level in Indonesia at 59-61%, the estimated total abortion rate is 1.9-2.2. Based on the plot of this total abortion rate, an abortion decline scenario can be estimated. At the current TFR level of 2.6, the required contraceptive prevalence is 69% (9% increase) for a decrease of one abortion case per woman. With a delay of one year in the age of the first marriage and a birth interval of three years, it is estimated that the abortion rate will decline from 3.05 to 0.69 case per woman throughout her reproductive period. Based on the assumption of contraceptive prevalence growth at 1-1.4%, it can be estimated that abortion rate will reach nearly 0 between 2018 and 2022.

2104.02174

A Machine Learning Model for Nowcasting Epidemic Incidence

Due to delay in reporting, the daily national and statewide COVID-19 incidence counts are often unreliable and need to be estimated from recent data. This process is known in economics as nowcasting. We describe in this paper a simple random forest statistical model for nowcasting the COVID - 19 daily new infection counts based on historic data along with a set of simple covariates, such as the currently reported infection counts, day of the week, and time since first reporting. We apply the model to adjust the daily infection counts in Ohio, and show that the predictions from this simple data-driven method compare favorably both in quality and computational burden to those obtained from the state-of-the-art hierarchical Bayesian model employing a complex statistical algorithm.

2104.02957

Conductance-based Dynamic Causal Modeling: A mathematical review of its application to cross-power spectral densities

Dynamic Causal Modeling (DCM) is a Bayesian framework for inferring on hidden (latent) neuronal states, based on measurements of brain activity. Since its introduction in 2003 for functional magnetic resonance imaging data, DCM has been extended to electrophysiological data, and several variants have been developed. Their biophysically motivated formulations make these models promising candidates for providing a mechanistic understanding of human brain dynamics, both in health and disease. However, due to their complexity and reliance on concepts from several fields, fully understanding the mathematical and conceptual basis behind certain variants of DCM can be challenging. At the same time, a solid theoretical knowledge of the models is crucial to avoid pitfalls in the application of these models and interpretation of their results. In this paper, we focus on one of the most advanced formulations of DCM, i.e. conductance-based DCM for cross-spectral densities, whose components are described across multiple technical papers. The aim of the present article is to provide an accessible exposition of the mathematical background, together with an illustration of the model's behavior. To this end, we include step-by-step derivations of the model equations, point to important aspects in the software implementation of those models, and use simulations to provide an intuitive understanding of the type of responses that can be generated and the role that specific parameters play in the model. Furthermore, all code utilized for our simulations is made publicly available alongside the manuscript to allow readers an easy hands-on experience with conductance-based DCM.

2104.04567

Light-weight sleep monitoring: electrode distance matters more than placement for automatic scoring

Modern sleep monitoring development is shifting towards the use of unobtrusive sensors combined with algorithms for automatic sleep scoring. Many different combinations of wet and dry electrodes, ear-centered, forehead-mounted or headband-inspired designs have been proposed, alongside an ever growing variety of machine learning algorithms for automatic sleep scoring. In this paper, we compare 13 different, realistic sensor setups derived from the same data set and analysed with the same pipeline. We find that all setups which include both a lateral and an EOG derivation show similar, state-of-the-art performance, with average Cohen's kappa values of at least 0.80. This indicates that electrode distance, rather than position, is important for accurate sleep scoring. Finally, based on the results presented, we argue that with the current competitive performance of automated staging approaches, there is an urgent need for establishing an improved benchmark beyond current single human rater scoring.

2104.05057

Tree species, crown cover, and age as determinants of the vertical distribution of airborne LiDAR returns

Light detection and ranging (LiDAR) provides information on the vertical structure of forest stands enabling detailed and extensive ecosystem study. The vertical structure is often summarized by scalar features and data-reduction techniques that limit the interpretation of results. Instead, we quantified the influence of three variables, species, crown cover, and age, on the vertical distribution of airborne LiDAR returns from forest stands. We studied 5,428 regular, even-aged stands in Quebec (Canada) with five dominant species: balsam fir (Abies balsamea (L.) Mill.), paper birch (Betula papyrifera Marsh), black spruce (Picea mariana (Mill.) BSP), white spruce (Picea glauca Moench) and aspen (Populus tremuloides Michx.). We modeled the vertical distribution against the three variables using a functional general linear model and a novel nonparametric graphical test of significance. Results indicate that LiDAR returns from aspen stands had the most uniform vertical distribution. Balsam fir and white birch distributions were similar and centered at around 50% of the stand height, and black spruce and white spruce distributions were skewed to below 30% of stand height (p<0.001). Increased crown cover concentrated the distributions around 50% of stand height. Increasing age gradually shifted the distributions higher in the stand for stands younger than 70-years, before plateauing and slowly declining at 90-120 years. Results suggest that the vertical distributions of LiDAR returns depend on the three variables studied.

2104.06109

Optimization of Sequential Microwave-Ultrasound-Assisted Extraction for Maximum Recovery of Quercetin and Total Flavonoids from Red Onion (Allium cepa L.) Skin Wastes

This study aimed to optimize the extraction conditions in order to maximize the recovery yields of quercetin and total flavonoids from red onion skin wastes using sequential microwave-ultrasound-assisted extraction. Five effective factors on quercetin extraction yield were investigated using response surface methodology. The method was successfully performed under optimal conditions of 60 s microwave irradiation followed by 15 min sonication at 70 {\deg}C, 70% ethanol with solvent to solid ratio of 30 mL/g. Based on the optimization results, ultrasound temperature was found to be a highly significant and influential factor for the recovery. The maximum recovery yields of quercetin and total flavonoids from red onion skin were estimated to be 10.32 and 12.52%, respectively. The predicted values for quercetin (10.05%) and total flavonoids (12.72%) were very close to the experimental results. The recovery yields obtained from different extraction methods were as follows: ultrasound-microwave-assisted extraction (7.66% quercetin and 10.18% total flavonoids), ultrasound-assisted extraction (5.36% quercetin and 8.34% total flavonoids), and microwave-assisted extraction (5.03% quercetin and 7.91 % total flavonoids). The validity of the projected model was examined by the obtained experimental data; in which, the validated model was suitable for the recovery of the valuable products from onion skin wastes for further scale-up in the food processes.

2104.06275

Mixed-horizon optimal feedback control as a model of human movement

Computational optimal feedback control (OFC) models in the sensorimotor control literature span a vast range of different implementations. Among the popular algorithms, finite-horizon, receding-horizon or infinite-horizon linear-quadratic regulators (LQR) have been broadly used to model human reaching movements. While these different implementations have their unique merits, all three have limitations in simulating the temporal evolution of visuomotor feedback responses. Here we propose a novel approach - a mixed-horizon OFC - by combining the strengths of the traditional finite-horizon and the infinite-horizon controllers to address their individual limitations. Specifically, we use the infinite-horizon OFC to generate durations of the movements, which are then fed into the finite-horizon controller to generate control gains. We then demonstrate the stability of our model by performing extensive sensitivity analysis of both re-optimisation and different cost functions. Finally, we use our model to provide a fresh look to previously published studies by reinforcing the previous results, providing alternative explanations to previous studies, or generating new predictive results for prior experiments.

2104.06640

Classifying herbal medicine origins by temporal and spectral data mining of electronic nose

The origins of herbal medicines are important for their treatment effect, which could be potentially distinguished by electronic nose system. As the odor fingerprint of herbal medicines from different origins can be tiny, the discrimination of origins can be much harder than that of different categories. Better feature extraction methods are significant for this task to be more accurately done, but there lacks systematic studies on different feature extraction methods. In this study, we classified different origins of three categories of herbal medicines with different feature extraction methods: manual feature extraction, mathematical transformation, deep learning algorithms. With 50 repetitive experiments with bootstrapping, we compared the effectiveness of the extractions with a two-layer neural network w/o dimensionality reduction methods (principal component analysis, linear discriminant analysis) as the three base classifiers. Compared with the conventional aggregated features, the Fast Fourier Transform method and our novel approach (longitudinal-information-in-a-line) showed an significant accuracy improvement(p < 0.05) on all 3 base classifiers and all three herbal medicine categories. Two of the deep learning algorithm we applied also showed partially significant improvement: one-dimensional convolution neural network(1D-CNN) and a novel graph pooling based framework - multivariate time pooling(MTPool).

2104.07071

Prospector: a mobile app for high-throughput NIRS phenotyping

Quality traits are some of the most important and time-consuming phenotypes to evaluate in plant breeding programs. These traits are often evaluated late in the breeding pipeline due to their cost, resulting in the potential advancement of many lines that are not suitable for release. Near-infrared spectroscopy (NIRS) is a non-destructive tool that can rapidly increase the speed at which quality traits are evaluated. However, most spectrometers are non-portable or prohibitively expensive. Recent advancements have led to the development of consumer-targeted, inexpensive spectrometers with demonstrated potential for breeding applications. Unfortunately, the mobile applications for these spectrometers are not designed to rapidly collect organized samples at the scale necessary for breeding programs. To that end, we developed Prospector, a mobile application that connects with LinkSquare portable NIR spectrometers and allows breeders to efficiently capture NIR data. In this report, we outline the core functionality of the app and how it can easily be integrated into breeding workflows as well as the opportunities for further development. Prospector and other high throughput phenotyping tools and technologies are required for plant breeders to develop the next generation of improved varieties necessary to feed a growing global population.

2104.08961

A cross-study analysis of drug response prediction in cancer cell lines

To enable personalized cancer treatment, machine learning models have been developed to predict drug response as a function of tumor and drug features. However, most algorithm development efforts have relied on cross validation within a single study to assess model accuracy. While an essential first step, cross validation within a biological data set typically provides an overly optimistic estimate of the prediction performance on independent test sets. To provide a more rigorous assessment of model generalizability between different studies, we use machine learning to analyze five publicly available cell line-based data sets: NCI60, CTRP, GDSC, CCLE and gCSI. Based on observed experimental variability across studies, we explore estimates of prediction upper bounds. We report performance results of a variety of machine learning models, with a multitasking deep neural network achieving the best cross-study generalizability. By multiple measures, models trained on CTRP yield the most accurate predictions on the remaining testing data, and gCSI is the most predictable among the cell line data sets included in this study. With these experiments and further simulations on partial data, two lessons emerge: (1) differences in viability assays can limit model generalizability across studies, and (2) drug diversity, more than tumor diversity, is crucial for raising model generalizability in preclinical screening.

2104.11644

Quantitative mapping of the brain's structural connectivity using diffusion MRI tractography: a review

Diffusion magnetic resonance imaging (dMRI) tractography is an advanced imaging technique that enables in vivo mapping of the brain's white matter connections at macro scale. Over the last two decades, the study of brain connectivity using dMRI tractography has played a prominent role in the neuroimaging research landscape. In this paper, we provide a high-level overview of how tractography is used to enable quantitative analysis of the brain's structural connectivity in health and disease. We first provide a review of methodology involved in three main processing steps that are common across most approaches for quantitative analysis of tractography, including methods for tractography correction, segmentation and quantification. For each step, we aim to describe methodological choices, their popularity, and potential pros and cons. We then review studies that have used quantitative tractography approaches to study the brain's white matter, focusing on applications in neurodevelopment, aging, neurological disorders, mental disorders, and neurosurgery. We conclude that, while there have been considerable advancements in methodological technologies and breadth of applications, there nevertheless remains no consensus about the "best" methodology in quantitative analysis of tractography, and researchers should remain cautious when interpreting results in research and clinical applications.

2105.00448

A scalable solver for a stochastic, hybrid cellular automaton model of personalized breast cancer therapy

Mathematical modeling and simulation is a promising approach to personalized cancer medicine. Yet, the complexity, heterogeneity and multi-scale nature of cancer pose significant computational challenges. Coupling discrete cell-based models with continuous models using hybrid cellular automata is a powerful approach for mimicking biological complexity and describing the dynamical exchange of information across different scales. However, when clinically relevant cancer portions are taken into account, such models become computationally very expensive. While efficient parallelization techniques for continuous models exist, their coupling with discrete models, particularly cellular automata, necessitates more elaborate solutions. Building upon FEniCS, a popular and powerful scientific computing platform for solving partial differential equations, we developed parallel algorithms to link stochastic cellular automata with differential equations ( https://bitbucket.org/HTasken/cansim ). The algorithms minimize the communication between processes that share cellular automata neighborhood values while also allowing for reproducibility during stochastic updates. We demonstrated the potential of our solution on a complex hybrid cellular automaton model of breast cancer treated with combination chemotherapy. On a single-core processor, we obtained nearly linear scaling with an increasing problem size, whereas weak parallel scaling showed moderate growth in solving time relative to increase in problem size. Finally we applied the algorithm to a problem that is 500 times larger than previous work, allowing us to run personalized therapy simulations based on heterogeneous cell density and tumor perfusion conditions estimated from magnetic resonance imaging data on an unprecedented scale.

2105.03903

Rough Set Microbiome Characterisation

Microbiota profiles measure the structure of microbial communities in a defined environment (known as microbiomes). In the past decade, microbiome research has focused on health applications as a result of which the gut microbiome has been implicated in the development of a broad range of diseases such as obesity, inflammatory bowel disease, and major depressive disorder. A key goal of many microbiome experiments is to characterise or describe the microbial community. High-throughput sequencing is used to generate microbiota profiles, but data gathered via this method are extremely challenging to analyse, as the data violate multiple strong assumptions of standard models. Rough Set Theory (RST) has weak assumptions that are less likely to be violated, and offers a range of attractive tools for extracting knowledge from complex data. In this paper we present the first application of RST for characterising microbiomes. We begin with a demonstrative benchmark microbiota profile and extend the approach to gut microbiomes gathered from depressed subjects to enable knowledge discovery. We find that RST is capable of excellent characterisation of the gut microbiomes in depressed subjects and identifying previously undescribed alterations to the microbiome-gut-brain axis. An important aspect of the application of RST is that it provides a possible solution to an open research question regarding the search for an optimal normalisation approach for microbiome census data, as one does not currently exist.

2105.04042

A modified two-leaf light use efficiency model for improving the simulation of GPP using a radiation scalar

A TL-LUE model modified with a radiation scalar (RTL-LUE) is developed in this paper. The same maximum LUE is used for both sunlit and shaded leaves, and the difference in LUE between sunlit and shaded leaf groups is determined by the same radiation scalar. The RTL-LUE model was calibrated and validated at global 169 FLUXNET eddy covariance (EC) sites. Results indicate that although GPP simulations from the TL-LUE model match well with the EC GPP, the RTL-LUE model can further improve the simulation, for half-hour, 8-day, and yearly time scales. The TL-LUE model tends to overestimate GPP under conditions of high incoming photosynthetically active radiation (PAR), because the radiation-independent LUE values for both sunlit and shaded leaves are only suitable for low-medium (e.g. average) incoming PAR conditions. The errors in the RTL-LUE model show lower sensitivity to PAR, and its GPP simulations can better track the diurnal and seasonal variations of EC GPP by alleviating the overestimation at noon and growing seasons associated with the TL-LUE model. This study demonstrates the necessity of considering a radiation scalar in GPP simulation in LUE models even if the first-order effect of radiation is already considered through differentiating sunlit and shaded leaves. The simple RTL-LUE developed in this study would be a useful alternative to complex process-based models for global carbon cycle research.

2105.10365

Dynamical models for metabolomics data integration

As metabolomics datasets are becoming larger and more complex, there is an increasing need for model-based data integration and analysis to optimally leverage these data. Dynamical models of metabolism allow for the integration of heterogeneous data and the analysis of dynamical phenotypes. Here, we review recent efforts in using dynamical metabolic models for data integration, focusing on approaches that are not restricted to steady-state measurements or that require flux distributions as inputs. Furthermore, we discuss recent advances and current challenges. We conclude that much progress has been made in various areas, such as the development of scalable simulation tools, and that, although challenges remain, dynamical modeling is a powerful tool for metabolomics data analysis that is not yet living up to its full potential.

2105.10627

Centralizing data to unlock whole-cell models

Despite substantial potential to transform bioscience, medicine, and bioengineering, whole-cell models remain elusive. One of the biggest challenges to whole-cell models is assembling the large and diverse array of data needed to model an entire cell. Thanks to rapid advances in experimentation, much of the necessary data is becoming available. Furthermore, investigators are increasingly sharing their data due to increased emphasis on reproducibility. However, the scattered organization of this data continues to hamper modeling. Toward more predictive models, we highlight the challenges to assembling the data needed for whole-cell modeling and outline how we can overcome these challenges by working together to build a central data warehouse.

2105.12008

A protocol for dynamic model calibration

Ordinary differential equation models are nowadays widely used for the mechanistic description of biological processes and their temporal evolution. These models typically have many unknown and non-measurable parameters, which have to be determined by fitting the model to experimental data. In order to perform this task, known as parameter estimation or model calibration, the modeller faces challenges such as poor parameter identifiability, lack of sufficiently informative experimental data, and the existence of local minima in the objective function landscape. These issues tend to worsen with larger model sizes, increasing the computational complexity and the number of unknown parameters. An incorrectly calibrated model is problematic because it may result in inaccurate predictions and misleading conclusions. For non-expert users, there are a large number of potential pitfalls. Here, we provide a protocol that guides the user through all the steps involved in the calibration of dynamic models. We illustrate the methodology with two models, and provide all the code required to reproduce the results and perform the same analysis on new models. Our protocol provides practitioners and researchers in biological modelling with a one-stop guide that is at the same time compact and sufficiently comprehensive to cover all aspects of the problem.

2105.12163

Optimizing the location of vaccination sites to stop a zoonotic epidemic

The mainstay of canine rabies control is fixed point mass dog vaccination campaigns (MDVC). However, in some regions, ideal vaccination coverage in dogs is not obtained due to low participation in the MDVC. Travel distance to the vaccination sites has been identified as an important barrier to participation. We aim to increase MDVC participation by optimally placing fixed point vaccination locations to minimize walking distance to the nearest vaccination location. We quantified participation probability based on walking distance to the nearest vaccination point using a Poisson regression model. The regression was fit with survey data collected from 2016-2019. We then used a computational recursive interchange technique to solve the facility location problem to find a set of optimal placements of fixed point vaccination locations. Finally, we compared predicted participation of optimally placed vaccination sites to historical participation data from surveys collected from 2016-2019. We identified the p-median algorithm to solve the facility location problem as ideal for fixed point vaccination placement. We found a predicted increase in MDVC participation if vaccination locations are placed optimally. We also found a more even vaccination coverage with optimized vaccination sites; however, the workload in some optimized locations increased significantly. We developed a data-driven computational algorithm to combat an ongoing rabies epidemic by optimally using limited resources to maximize vaccination coverage. The main positive effects we expect if this algorithm is to be implemented would be increased overall vaccination coverage and increased spatial evenness of coverage. A potential negative effect could be the presence of long waiting lines as participation increases.

2105.12809

Prenatal stress perturbs fetal iron homeostasis in a sex-specific manner

What is the influence of chronic maternal prenatal stress (PS) on fetal iron homeostasis? In a prospective case-control study in 164 pregnant women, we show that cord blood transferrin saturation is lower in male stressed neonates. The total effect of PS exposure on fetal ferritin revealed a decrease of 15.4% compared with controls. Electrocardiogram-based Fetal Stress Index (FSI) identified affected fetuses non-invasively during the third trimester of gestation. FSI-based timely detection of fetuses affected by PS can support early individualized iron supplementation and neurodevelopmental follow-up to prevent long-term sequelae due to PS-exacerbated impairment of the iron homeostasis.