instruction
stringlengths 126
193
| input
stringlengths 9
40
| output
stringclasses 14
values | text
stringlengths 213
293
|
|---|---|---|---|
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon G/L piping group | PAZ/FPSOT/OIL/SEP /IPN-_HC-TO20-01-D03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon G/L piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual Inspection described as BUOY COMPARTMENT | CLV/BUOY /HSG/STRUC/COMP C12 | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual Inspection described as BUOY COMPARTMENT<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as METHANOL BUFFER DRUM | PAZ/FPSOT/COF/CHEM /TO-V_-7511A | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as METHANOL BUFFER DRUM<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP3 COMPRESSOR SUCTION SCRUBBER B | CLV/FPSOT/GAS/COMP /TO-VZ-3150B | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP3 COMPRESSOR SUCTION SCRUBBER B<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as HYDROCYCLONE B OUTLET PRESS. SAFE. VALVE | CLV/FPSOT/OIL/OWAT /TO-PSV-27155B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as HYDROCYCLONE B OUTLET PRESS. SAFE. VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as AHU CONDENSING WATER COLLECTING TANK | PAZ/FPSOH/HSG/ACCOM/HU-TZ-8251 | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as AHU CONDENSING WATER COLLECTING TANK<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PRESSURE SAFETY VALVE | PAZ/FPSOT/OIL/OWAT /TO-PSV1-27066 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as FLARE & HC BLANKET PACKAG TUBE EXCHANGER | PAZ/FPSOT/GAS/COMP /TO-ES-3170 | Pressure Vessel (VII) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as FLARE & HC BLANKET PACKAG TUBE EXCHANGER<end_of_turn>
<start_of_turn>model
Pressure Vessel (VII)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as MAIN CHW UNIT A CONDENSER COOLING A | PAZ/FPSOH/CRS/HVAC /HU-EL-0911A | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as MAIN CHW UNIT A CONDENSER COOLING A<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on BV Class Intermediate Survey described as AFT PEAK TANK STARBOARD | PAZ/FPSOH/HSG/STRUC/HU-T_-8605 | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on BV Class Intermediate Survey described as AFT PEAK TANK STARBOARD<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HYDRAULIC OIL TANK | CLV/FPSOH/CRS/FWAT /HU-TZ-0110C2 | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HYDRAULIC OIL TANK<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrocarbon gas piping group | CLV/FPSOT/GAS/FLARE/IPN-_HG-TO36-53-B03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrocarbon gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as GAS METH. FILTER OUTLET PRESS SAFE VALVE | CLV/FPSOT/COF/CHEM /TO-PSV-75416 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as GAS METH. FILTER OUTLET PRESS SAFE VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydraulic fluid piping group | PAZ/FPSOH/CRS/AIR /IPN-_HH-HU07-03-_50 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydraulic fluid piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as 1ST STAGE OUTLET PRESSURE SAFETY VALVE | PAZ/FPSOH/CRS/AIR /HU-PSV-07101B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as 1ST STAGE OUTLET PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrocarbon gas piping group | CLV/FPSOT/GAS/COMP /IPN-_HG-TO31-45-B49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrocarbon gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as MAIN L.O. PUMP OUTLET PRESS. SAFE. VALVE | CLV/FPSOT/WAT/WINJ /TO-PSV-54254A | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as MAIN L.O. PUMP OUTLET PRESS. SAFE. VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as SINGLE DELUGE/AFFF PRESSURE SAFETY VALVE | PAZ/FPSOT/CRS/FWAT /TO-PSV-010101B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as SINGLE DELUGE/AFFF PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on SCD + VIE described as Hydrocarbon gas piping group | PAZ/FPSOT/GAS/TRANS/IPN-_HG-TO34-22-H49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on SCD + VIE described as Hydrocarbon gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S2 Structural Module | PAZ/FPSOT/HSG/STRUC/S2 | Structure | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S2 Structural Module<end_of_turn>
<start_of_turn>model
Structure<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as HP1 LUBE OIL PRESSURE SAFETY VALVE | CLV/FPSOT/GAS/COMP /TO-PSV-31353BB | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as HP1 LUBE OIL PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S8 Structural Module | PAZ/FPSOT/HSG/STRUC/S8 | Structure | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S8 Structural Module<end_of_turn>
<start_of_turn>model
Structure<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLASS PSV-OB-PSSV1-25309 REVISION described as TANK PRESSURE SURGE SAFETY VALVE | PAZ/BUOY /OIL/LOAD /OB-PSSV1-25309 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLASS PSV-OB-PSSV1-25309 REVISION described as TANK PRESSURE SURGE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - APT_P_CP Measurement described as PORT WING BALLAST BUFFER TANK B | CLV/FPSOH/HSG/STRUC/HU-TR-8631B | Corrosion Monitoring | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - APT_P_CP Measurement described as PORT WING BALLAST BUFFER TANK B<end_of_turn>
<start_of_turn>model
Corrosion Monitoring<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV Gas cylinders inspection campaign described as CLV-GAS CYLINDERS & ACCUMULATORS | CLV/FPSOT/CRS/SAFE /GC-ACC | Campaign | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV Gas cylinders inspection campaign described as CLV-GAS CYLINDERS & ACCUMULATORS<end_of_turn>
<start_of_turn>model
Campaign<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as MANIFOLD PRESSURE SAFETY VALVE | PAZ/FPSOT/COF/CHEM /TO-PSV1-75099C | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as MANIFOLD PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP COMPRESSOR AFTER COOLER | PAZ/FPSOT/GAS/COMP /TO-ES-3155 | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP COMPRESSOR AFTER COOLER<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/Replace described as GLYCOL CIRC PUMP A PRESSURE SAFETY VALVE | PAZ/FPSOT/GAS/DEHYD/TO-PSV-300506A | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/Replace described as GLYCOL CIRC PUMP A PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as ELECTROSTATIC DEHYDRATOR TRAIN B | PAZ/FPSOT/OIL/STAB /TO-V_-2111B | Pressure Vessel (VII) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as ELECTROSTATIC DEHYDRATOR TRAIN B<end_of_turn>
<start_of_turn>model
Pressure Vessel (VII)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as SUPERSTRUCTURE | PAZ/FPSOH/HSG/STRUC/SUPERSTRUCTURE | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as SUPERSTRUCTURE<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as FUEL GAS KO POT | CLV/FPSOT/ELE/PWG /TO-VZ-6022C | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as FUEL GAS KO POT<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PIG TRAP PRESSURE SAFETY VALVE | PAZ/FPSOT/OIL/SEP /TO-PSV-20077 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PIG TRAP PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Major Instrus.insp_LQ-FLR-0511 FL.ARREST described as EMDG FLAME ARRESTOR | PAZ/FPSOA/CRS/EPWG /LQ-FLR-0511 | Flame Arrestor | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Major Instrus.insp_LQ-FLR-0511 FL.ARREST described as EMDG FLAME ARRESTOR<end_of_turn>
<start_of_turn>model
Flame Arrestor<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary struc described as M116 Structural Module GLYCOL GENERATION | CLV/FPSOT/HSG/STRUC/M116 | Structure | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary struc described as M116 Structural Module GLYCOL GENERATION<end_of_turn>
<start_of_turn>model
Structure<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as OUTLET WATER THERMAL SAFETY VALVE B | PAZ/FPSOT/GAS/COMP /TO-TSV-31414B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as OUTLET WATER THERMAL SAFETY VALVE B<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as 1ST STAGE SEPARATOR | CLV/FPSOT/OIL/SEP /TO-VZ-2010 | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as 1ST STAGE SEPARATOR<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/Scrap described as DAMPER SEALING AIR RESERVOIR PSV | PAZ/FPSOT/ELE/PWG /TO-PSV-720513E | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/Scrap described as DAMPER SEALING AIR RESERVOIR PSV<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as SW/CW EXCHANGER A THERMAL SAFETY VALVE | CLV/FPSOT/COF/COOLW/TO-TSV-76121A | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Pre-Pop test, overhaul & recalibration described as SW/CW EXCHANGER A THERMAL SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/TO-FA-6031E1 FLAME ARRESTOR described as FLAME ARRESTOR1 | PAZ/FPSOT/ELE/PWG /TO-FA-6031E1 | Flame Arrestor | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/TO-FA-6031E1 FLAME ARRESTOR described as FLAME ARRESTOR1<end_of_turn>
<start_of_turn>model
Flame Arrestor<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as AIR START GAS VESSEL D6 | PAZ/FPSOH/CRS/FWAT /HU-VB-0101D6 | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as AIR START GAS VESSEL D6<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Produced water piping group | PAZ/FPSOT/OIL/OWAT /IPN-_PW-TO27-01-D03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Produced water piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as TO-UZ-6032E:TSV-602585E Exchange | PAZ/FPSOT/ELE/PWG /TO-TSV-602585E | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as TO-UZ-6032E:TSV-602585E Exchange<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WB4P - CP Measurement described as PORT WING BALLAST 4P | PAZ/FPSOH/HSG/STRUC/HU-T_-8611D | Corrosion Monitoring | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WB4P - CP Measurement described as PORT WING BALLAST 4P<end_of_turn>
<start_of_turn>model
Corrosion Monitoring<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Internal & External inspection described as FLAME ARRESTOR, EXHAUST DIESEL ENG FWP D | CLV/FPSOH/CRS/FWAT /TO-FA-0110D1 | Flame Arrestor | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Internal & External inspection described as FLAME ARRESTOR, EXHAUST DIESEL ENG FWP D<end_of_turn>
<start_of_turn>model
Flame Arrestor<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as PSD-2024//HU-UZ-0101C: PSV-016069C SCRAP | PAZ/FPSOH/CRS/FWAT /HU-PSV-016069C | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Scrap/replace described as PSD-2024//HU-UZ-0101C: PSV-016069C SCRAP<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Antifoam piping group | CLV/FPSOT/COF/CHEM /IPN-_AF-TO75-02-_50 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Antifoam piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as P6 Structural Module | PAZ/FPSOT/HSG/STRUC/P6 | Structure | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as P6 Structural Module<end_of_turn>
<start_of_turn>model
Structure<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Closed drain piping group | PAZ/FPSOT/OIL/DRAIN/IPN-_CD-TO28-19-H21 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Closed drain piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as MANIFOLD PRESSURE SAFETY VALVE | PAZ/FPSOT/COF/CHEM /TO-PSV2-75099A | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as MANIFOLD PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on NDT + VIE described as Produced water piping group | PAZ/FPSOT/OIL/OWAT /IPN-_PW-TO27-05-B03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on NDT + VIE described as Produced water piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as CRUDE INLET HEATER A | PAZ/FPSOT/OIL/SEP /TO-ES-2011A | Pressure Vessel (VII) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as CRUDE INLET HEATER A<end_of_turn>
<start_of_turn>model
Pressure Vessel (VII)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/SCrap described as STBY COOLER OUTLET TEMP. SAFETY VALVE D2 | CLV/FPSOT/ELE/PWG /TO-TSV-60168D2 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/SCrap described as STBY COOLER OUTLET TEMP. SAFETY VALVE D2<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+UTC described as OOL AUXILIARY WINCH HPU DIESEL TANK | CLV/BUOY /CRS/AIR /OB-TZ-0756 | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+UTC described as OOL AUXILIARY WINCH HPU DIESEL TANK<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on AFTER MOORING PLATFORM PORT SIDE described as AFTER MOORING PLATFORM PORT SIDE | CLV/FPSOH/HSG/STRUC/HU-AFT-MOOR-PLAT-PS | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on AFTER MOORING PLATFORM PORT SIDE described as AFTER MOORING PLATFORM PORT SIDE<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ-FLOR_X-RAY YEARLY CAMPAIGN described as PAZFLOR Topsides | PAZ/FPSOT | Campaign | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ-FLOR_X-RAY YEARLY CAMPAIGN described as PAZFLOR Topsides<end_of_turn>
<start_of_turn>model
Campaign<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as P.W SURGE DRUM | PAZ/FPSOT/OIL/OWAT /TO-V_-2713 | Pressure Vessel (VII) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as P.W SURGE DRUM<end_of_turn>
<start_of_turn>model
Pressure Vessel (VII)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S3 Structural Module | PAZ/FPSOT/HSG/STRUC/S3 | Structure | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Visual inspection of tertiary structure described as S3 Structural Module<end_of_turn>
<start_of_turn>model
Structure<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Insp. CLV/BUOY/OB-JZ-8660B_Buoy Side described as BUOY MOORING HAWSER ASSEMBLY | CLV/BUOY /HSG/STRUC/OB-JZ-8660B | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Insp. CLV/BUOY/OB-JZ-8660B_Buoy Side described as BUOY MOORING HAWSER ASSEMBLY<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon liquid piping group | PAZ/FPSOT/OIL/SDS /IPC-_HL-TO29-01-B03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon liquid piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PRESSURE SAFETY VALVE | PAZ/FPSOT/OIL/STAB /TO-PSV-21015A1 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WBFC - CP Measurement described as FORE PEAK TANK CENTRAL | PAZ/FPSOH/HSG/STRUC/HU-T_-8607 | Corrosion Monitoring | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WBFC - CP Measurement described as FORE PEAK TANK CENTRAL<end_of_turn>
<start_of_turn>model
Corrosion Monitoring<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Major Instrus.insp_TO-FA-6015B1 F.ARREST described as TO LIQUID FUEL SYSTEM FLAME ARRESTOR1 | PAZ/FPSOT/ELE/PWG /TO-FA-6015B1 | Flame Arrestor | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Major Instrus.insp_TO-FA-6015B1 F.ARREST described as TO LIQUID FUEL SYSTEM FLAME ARRESTOR1<end_of_turn>
<start_of_turn>model
Flame Arrestor<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLASS PSV-Overhaul described as MEOH STOR TK PRESS VACUUM SAFETY VALVE | PAZ/FPSOH/COF/CHEM /HU-PVSV-75014 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLASS PSV-Overhaul described as MEOH STOR TK PRESS VACUUM SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Methanol piping group | CLV/FPSOT/COF/CHEM /IPN-_ME-TO75-02-_03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Methanol piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as HP FUEL GAS FILTER | PAZ/FPSOT/COF/FG /TO-VF-7001B | Pressure Vessel (VII) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VII described as HP FUEL GAS FILTER<end_of_turn>
<start_of_turn>model
Pressure Vessel (VII)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as RICH TEG FLASH DRUM | CLV/FPSOT/GAS/DEHYD/TO-VZ-3020A | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as RICH TEG FLASH DRUM<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Non-Intrusive Intermediate Inspection described as HPU OIL TANK | PAZ/FPSOH/CRS/SAFE /HU-TZ-0202B | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Non-Intrusive Intermediate Inspection described as HPU OIL TANK<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as CORROSION INHIBITOR STORAGE TANK | CLV/FPSOT/COF/CHEM /TO-TZ-7506 | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as CORROSION INHIBITOR STORAGE TANK<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/SCrap described as AIR RESERVOIR PRESSURE SAFETY VALVE | CLV/FPSOT/ELE/PWG /TO-PSV-72154B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Replace/SCrap described as AIR RESERVOIR PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLOV/PSV Replacement described as CIRCUIT 2 ECONOMIZER HP PRE-SAFETY VALVE | CLV/FPSOH/CRS/HVAC /HU-PSV-092632 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLOV/PSV Replacement described as CIRCUIT 2 ECONOMIZER HP PRE-SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as TO HP COLD FLARE PRESSURE SAFETY VALVE | PAZ/FPSOT/COF/FG /TO-PSV1-70009 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as TO HP COLD FLARE PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as OIL TANK B | CLV/FPSOH/WAT/WATLF/HU-TZ-5020B | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as OIL TANK B<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as DEGASSING DRUM PRESSURE SAFETY VALVE | PAZ/FPSOT/OIL/OWAT /TO-PSV1-27023 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as DEGASSING DRUM PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HOT WATER DUMP COOLER | CLV/FPSOT/COF/HEATL/TO-EP-7210 | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HOT WATER DUMP COOLER<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as MAIN CHW UNIT C CONDENSER COOLING C | PAZ/FPSOH/CRS/HVAC /HU-EL-0911C | Pressure Vessel (VIE) | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as MAIN CHW UNIT C CONDENSER COOLING C<end_of_turn>
<start_of_turn>model
Pressure Vessel (VIE)<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as High pressure flare piping group | CLV/FPSOT/GAS/FLARE/IPN-_FH-TO36-23-D49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as High pressure flare piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as SLUDGE TANK | PAZ/FPSOH/OIL/OWAT /HU-T_-2721B | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as SLUDGE TANK<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Produced water (Oily water) piping group | CLV/FPSOH/OIL/OWAT /IPN-_PW-HU27-06-D03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Produced water (Oily water) piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Fuel gas piping group | CLV/FPSOT/COF/FG /IPN-_FG-TO70-02-D01 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Fuel gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrochloric acid piping group | CLV/FPSOT/COF/CHEM /IPN-_HA-TO75-01-_86 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Hydrochloric acid piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Hydrocarbon liquid piping group | PAZ/FPSOT/OIL/STAB /IPN-_HL-TO21-03-B03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Hydrocarbon liquid piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as DESALTING TANK 2P | PAZ/FPSOH/OIL/STAB /HU-T_-2112B | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on BV tasks & intrusive major inspection described as DESALTING TANK 2P<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WB7P - CP Measurement described as PORT WING BALLAST 7P | PAZ/FPSOH/HSG/STRUC/HU-T_-8611G | Corrosion Monitoring | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on COR - WB7P - CP Measurement described as PORT WING BALLAST 7P<end_of_turn>
<start_of_turn>model
Corrosion Monitoring<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/BUOY/OB-JZ-8660A_Tanker Side described as BUOY MOORING ASSEMBLY | CLV/BUOY /HSG/STRUC/OB-JZ-8660A | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/BUOY/OB-JZ-8660A_Tanker Side described as BUOY MOORING ASSEMBLY<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as TO LP FLARE PRESSURE SAFETY VALVE 1 | PAZ/FPSOT/COF/CHEM /TO-PSV1-75024B | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as TO LP FLARE PRESSURE SAFETY VALVE 1<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/FPSOH/JE0202B - 12 MO Inspection described as FREE FALL LIFEBOAT DAVIT (NO2) | CLV/FPSOH/CRS/SAFE /HU-JE-0202B | Lifting | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/FPSOH/JE0202B - 12 MO Inspection described as FREE FALL LIFEBOAT DAVIT (NO2)<end_of_turn>
<start_of_turn>model
Lifting<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/ TO-PSV-9143 - Replace/scrap described as HYDRAULIC PUMP PRESSURE SAFETY VALVE | PAZ/FPSOT/EXT/EWELL/TO-PSV-9143 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/ TO-PSV-9143 - Replace/scrap described as HYDRAULIC PUMP PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/FPSOT/JA7830A - 6 MO Inspection described as PEDESTAL CRANE | CLV/FPSOT/COF/LIFT /TO-JA-7830A | Lifting | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on CLV/FPSOT/JA7830A - 6 MO Inspection described as PEDESTAL CRANE<end_of_turn>
<start_of_turn>model
Lifting<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on BV Class Intermediate Survey described as FORE PEAK TANK PORT | PAZ/FPSOH/HSG/STRUC/HU-T_-8606 | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on BV Class Intermediate Survey described as FORE PEAK TANK PORT<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on TEPA Hull Side Shell GVI described as HULL FOR FPSO | PAZ/FPSOH/HSG/STRUC/HULL | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on TEPA Hull Side Shell GVI described as HULL FOR FPSO<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/BOUY-DECK/TEPA GVI described as DECK FOR OFFLOADING BUOY | PAZ/BUOY /HSG/STRUC/DECK | FU Items | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/BOUY-DECK/TEPA GVI described as DECK FOR OFFLOADING BUOY<end_of_turn>
<start_of_turn>model
FU Items<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on APZP2390 Replacement described as P20 B.F PRESSURE SAFETY VALVE | PAZ/FPSOT/EXT/EWELL/SS-PSV-2390 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on APZP2390 Replacement described as P20 B.F PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP2/HP3 COMP. B LUBE OIL RESERVOIR | CLV/FPSOT/GAS/COMP /TO-TZ-3140B-1 | Non Structural Tank | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as HP2/HP3 COMP. B LUBE OIL RESERVOIR<end_of_turn>
<start_of_turn>model
Non Structural Tank<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+SCD described as Fuel gas piping group | CLV/FPSOT/COF/FG /IPN-_FG-TO70-10-F49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+SCD described as Fuel gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Lube oil piping group | CLV/FPSOH/COF/HTOIL/IPN-_LO-HU73-01-_49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE+NDT described as Lube oil piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Hydrocarbon liquid piping group | PAZ/FPSOH/OIL/STAB /IPN-_HL-HU21-03-B03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Hydrocarbon liquid piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Produced water piping group | PAZ/FPSOT/OIL/OWAT /IPN-_PW-TO27-06-D03 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on UTC + VIE described as Produced water piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as OUTLET TO BUFFER DRUMS PSV | PAZ/FPSOT/COF/CHEM /TO-PSV-75033A | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on Overhaul described as OUTLET TO BUFFER DRUMS PSV<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/ TO-PSV-9156 - Replace/Scrap described as ACCUMULATOR PRESSURE SAFETY VALVE | PAZ/FPSOT/EXT/EWELL/TO-PSV-9156 | Pressure Safety Device | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on PAZ/ TO-PSV-9156 - Replace/Scrap described as ACCUMULATOR PRESSURE SAFETY VALVE<end_of_turn>
<start_of_turn>model
Pressure Safety Device<end_of_turn>
<eos> |
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon gas piping group | PAZ/FPSOT/GAS/COMP /IPC-_HG-TO31-05-D49 | Piping | <bos><start_of_turn>user
You are an experienced inspection methods engineer, your task is to classify the following scope on VIE described as Hydrocarbon gas piping group<end_of_turn>
<start_of_turn>model
Piping<end_of_turn>
<eos> |
End of preview. Expand
in Dataset Viewer.
README.md exists but content is empty.
Use the Edit dataset card button to edit it.
- Downloads last month
- 63