instruction
stringlengths 28
338
| input
float64 | output
stringlengths 40
290
|
|---|---|---|
What causes the M139-CCD error code in the KM-ASSYM5-02 machine? | null | The solution for the error described as M139-CCD timed out while waiting for the left suction nozzle pickup completion signal (D218=1 not received) is to check the wiring and connections between |
What is the issue with the X axis left limit abnormality on a machine with error code M106-X axis left limit abnormality (X4) and machine code KM-ASSYM2-02 error id of 37? | null | The M106 error message usually indicates abnormalities in the X-axis motion control of your printer. One possible solution is to adjust the bed leveling procedure and calibration process to prevent the left limit of the bed from touching or going |
Some questions for you to help understand the error:
1. What does the error message "M118-Nozzle 2 return to origin time timeout machine code of KM-ASSYM2-05 error id of 49" mean?
2. What is the context | null | The M118 error occurs when the nozzle does not return to its original position within a specified time limit. To resolve this issue, you may need to adjust the nozzle's positioning parameters or limit the print speed. |
What does the M110-Y axis rear limit abnormality (X6) machine code mean in the context of a KM-ASSYM5-10 error id of 41? What possible causes could lead to this error and what can be done to fix it? | null | The solution to the M110-Y axis rear limit abnormality (X6) error may involve adjusting the rear limit switch to ensure it is properly aligned with the rear of the bed. If it is still inaccurate after |
What does the M7035 error code indicate in the work area of the conveyor belt? | null | The solution for M7035 error is to manually check if the discharge conveyor belt is jammed by inspecting the belt and clearing any obstacles or debris. If the problem persists, it may require maintenance or repair of the |
What is the likely cause of the error M131-Nozzle 1 failed to take pictures with the camera 3 times in a row in the KM-ASSYM5-07 machine code with error id of 62? | null | The solution for M131-Nozzle 1 failed to take pictures with the camera 3 times in a row may require a faulty camera or nozzle, check connections, software updates, or replace the malfunctioning component |
What error message is being displayed on the KM-ASSYM1-05 machine code? | null | M7037 error occurs when the discharging operation of the rear buffer conveyor belt times out and there is jamming between the upper and lower reaches of the machine. The solution is to clear any jamming in the machine, ensuring |
What is the M115-Nozzle 1 automatic positioning running time timeout error and what is its code identifier? | null | The solution for M115-Nozzle 1 automatic positioning running time timeout error is to check the printer's settings and configuration to ensure that the printer is set up to wait long enough for the automatic positioning process to complete |
What does the error message "M89-The material feeding operation in the work area has timed out, please check whether the machine is jammed" mean in the context of machine error codes such as KM-ASSYM2-03 error id of 20? What causes this error to | null | The solution for the M89 error is to open the work area and check for any jammed material or blockage. If there is no jam, perform a restart of the machine while observing the material feed operation. If the error repeats |
What is the material number confirmation information that M7119-CMC is reporting as incorrect?
What is the machine code (KM-ASSYM1-05) that M7119-CMC is using?
What is the error id (120 | null | The solution for M7119-CMC responding with incorrect material number confirmation information is to review and double-check the material number being entered, ensure it follows the correct format, and try resetting the device or running material verification checks. |
Did the front-end PLC1-M7000-display error code 1 related to the KM-ASSYH1-06 machine code of the work area? | null | Unfortunately, without any context or additional information provided, it's impossible to provide a specific solution to the described error. However, it is recommended to check the documentation and user manuals for the PLC1-M7000, as |
Here's a possible question related to the error you described:
What could be causing the M142-CCD waiting for product detection request signal exceeded (D207=1-12 not received) error code in the KM-ASSYM2-02 error id | null | This error message indicates a problem with the camera hardware where the camera is not receiving a valid signal from the product to initiate detection. Possible causes include issues with the camera's wiring, software, or hardware components. The solution would involve |
What is the M130 Product Marker 2 point photo failed error message and what hardware or software is generating this error? | null | Unfortunately, there is no one solution for the M130-Product Marker 2 point photo failed error as it can be caused by various issues such as incorrect photo alignment, lighting conditions, and software compatibility. To resolve it, try adjust |
What does the error message "M7001-Start detecting that there is material in the work area, please select the work area status machine code of KM-ASSYM5-01 error id of 2." mean? | null | The solution for the error "M7001-Start detecting that there is material in the work area, please select the work area status?" is to ensure that the appropriate work area is selected before starting the processing by either re-routing |
What errors may be returned for KM-ASSYM1-01 assembly units that have an error code of M7101, and what is the recommended solution for addressing these errors? | null | The solution for the error M7101 is to clean the scale pan using a cleaning tool provided by the scale manufacturer, and then to press the "Scale Pan Easy Clean Button" to reset the scale. If the problem persists, the |
What is the CAD software being used to design the KM-ASSYM5-07 robotic arm machine? | null | The M138-CCD timed out error occurs when the printer is unable to receive the left nozzle pickup request signal on D209, which may be due to a faulty nozzle, damaged wiring |
What is the M7116-Timeout error in the KM-ASSYM5-06 solution? | null | The M7116-Timeout waiting for next action error typically occurs when a software process is awaiting user input or a system event but is not receiving it within a specified timeout period. The solution may involve increasing the timeout limit, optimizing |
What kind of machine is the KM-ASSYM2-08 error related to? What type of error message is being displayed, specifically the M136-CCD reading arm Arrive signal timed out? What does the error id of 67 mean? Can you provide more information about | null | To fix the M136-CCD reading arm "Arrive signal timed out" error, you can try adjusting the timing settings of the reading arm, resetting the communication between devices, or checking for any possible interference with other |
What caused the error M7070-Y axis rear limit is abnormal, far away from the origin end (X12)? Is the slide table touching the limit? Also, was the KM-ASSYM1-01 error id of 71 detected when running machine code due to | null | There are a few possible solutions to address the error M7070-Y axis rear limit is abnormal, far away from the origin end (X12) including:
1. Adjusting the slide table position to ensure |
What is KM-ASSYM1-05 error id and what does it mean for the dispensing area detected by the upper camera to be out of range? | null | The solution for the M7089 error is to adjust the location and orientation of the upper camera to ensure it is within range of the dispensing area. If the camera cannot be moved, the error can also be resolved by adjusting the |
What does the error message "Front section PLC1-M7030-There is material on the material throwing platform, please take it away first" mean in the context of a machine code? | null | The error message "Front section PLC1-M7030: There is material on the material throwing platform, please take it away first?" usually indicates that a layer of material is jamming the platform of a material handling system. The |
What is the device or system that generated the error message with the error code 176?
What is the meaning of the error message "Later section M7015-Manual positioning ended abnormally?"
How can the error message be resolved?
What is the probable cause of | null | The solution for the error "Later section M7015-Manual positioning ended abnormally" could involve correcting any misconfigured or faulty settings related to the manual positioning of the printer, such as paper size |
What is the issue with the Front stage PLC1-M7018 in the automatic process machine code of KM-ASSYH4-06? What error id is associated with this issue? What message is displayed when this error occurs? What is the recommended action to correct this issue before starting | null | The solution for the Front stage PLC1-M7018 error described as "Please press the reset button before starting the automatic process" is as follows: Press the reset button before starting the automatic process. This process should restart and run |
What is the purpose of the KM-ASSYM4-05 electronic scale? What function does it serve? | null | M7094-PLC timed out waiting for the signal from the host computer to complete the electronic scale clearing can be resolved by checking if the host computer is properly connected and also ensuring that there are no delays or issues with the |
What is KM-ASSYM5-08 error id 39, and what does it mean specifically for the M108-Assembly point deviation is too large machine code? | null | The M108-Assembly point deviation is too large error typically occurs in assembly code when attempting to perform a modification that exceeds the amount of memory available. To fix this issue, you may need to adjust the code to allocate less memory |
Here is a sample question related to the error you provided:
What could be causing the abnormal material on the clamping jaw of a machine during startup, and how can it be resolved to prevent similar errors from occurring in the future?
The machine in question is a KM-ASSYH | null | The answer to the error described as [Later Section] M7031-Abnormal material on the clamping jaw during startup depends on the root cause of the issue. Some possible solutions include cleaning the clamping jaw, replacing |
What might be the cause of the error message "Front section PLC1-M7049-the picking clamp has dropped abnormally, please check the sensor-X61 machine code of KM-ASSYH2-06 error id of 50"? | null | The error message "Front section PLC1-M7049-the picking clamp has dropped abnormally, please check the sensor-X61" refers to a specific type of error that may occur in a machine control system |
One possible question related to this issue could be:
What steps should be taken to troubleshoot the M134-CCD timed out waiting for arm START OK signal error code 65 in KM-ASSYM3-03 machine code? | null | The M134-CCD error occurs when the Arduino attempts to communicate with the CCD module over the serial port, but the module does not respond within a specified time period. This error can be resolved by adjusting the b |
What is the safe distance for the PCB board in the KM-ASSYM4-05 machine, and what is the error being described as? Could you provide more context or details about the specific error? | null | The solution to M7098 error is to check whether the PCB board is placed correctly and not exceeding the safe distance. The board should be centered properly and securely fastened to prevent any damage to the components or the board itself |
What is the issue with Front stage PLC1-M7021 and the Z-axis not being in the safe position during reset? Can you provide more information on the return to origin machine code of KM-ASSYH2-06 error id of 22? | null | The solution to the error "Front stage PLC1-M7021-the Z-axis is not in the safe position during reset" is to perform a return to origin first, which will ensure that the axis is in its safe |
What is the error code generated when you are attempting to start the machine with KM-ASSYM5-01 error id of 20 in M7019-The device abnormality has not been eliminated before automatic startup? | null | The solution for M7019 error is to first identify and eliminate the device abnormality before automatic startup. This can be achieved through manually testing the device and resetting it if necessary. |
What does the error M7066 indicate about the jacking cylinder in the Tray area of the machine? | null | To resolve the error with the abnormal jacking cylinder at the lower level of the Tray area, it's recommended to check the cylinder's condition, ensure there is no leakage, lubrication of the worn parts and |
what is the error id of the machine code that caused the M7071-Y axis return to origin time has timed out error? | null | The M7071-Y axis return to origin time has timed out error indicates that the Y-axis slide table is not responding to commands. This can be due to a stuck or abnormal condition. To troubleshoot this issue |
What might cause the M7050-Left lifting cylinder abnormality machine code of KM-ASSYH2-07 error id of 51? | null | The solution for the error described as [Front Section] M7050-Left lifting cylinder abnormality involves troubleshooting, inspection, and repair of the affected components, including the lifting cylinder and any associated controls or components |
What is M7101 related to in the context of the KM-ASSYM4-01 error code?
What is machine code for "Scale Pan Easy Clean Button"?
What is the error id number 102 in the context of the KM-ASSYM | null | The solution for the error M7101 is to clean the scale pan using a cleaning tool provided by the scale manufacturer, and then to press the "Scale Pan Easy Clean Button" to reset the scale. If the problem persists, the |
What is the meaning of the error message M7104? | null | The M7104 error indicates that the host computer failed to read the READ signal sent by TE (Telecom Equipment) and resulted in a LINK fail. This issue may occur when the fiber optic cable is damaged, or there is |
What does the M106-X axis right limit abnormality (X4) error indicate in machine code for KM-ASSYM5-05? | null | The solution for the error "M106-X axis right limit abnormality (X4)" usually involves adjusting the position of the print bed or the extruder to ensure that the X-axis is not touching the right limit |
What is the problem with the clamping cylinder rear limit sensor in a KM-FPS machine? Can you describe the symptoms of this error? | null | The clamping cylinder rear limit sensor may be incorrectly or malfunctioning. This can be caused by damage or improper installation. To resolve this issue, check the sensor for any signs of damage or misalignment and make any necessary |
What is the purpose of scanning the machine code and what is the possible cause for M7091-Scan code OK? What is KM-ASSYM5-06 and what is the possible error code 92? What is the expected response after scanning the machine code with a timeout | null | There could be various reasons why you are encountering the M7091-Scan code OK error along with TE Read signal timeout when scanning a code. Some possible solutions include updating your firmware, ensuring that your scanner is sufficiently powered |
What is the possible cause of error M7071-Y axis return to origin time has timed out when using a KM-ASSYM2-06 machine? | null | The M7071-Y axis return to origin time has timed out error indicates that the Y-axis slide table is not responding to commands. This can be due to a stuck or abnormal condition. To troubleshoot this issue |
What error is being displayed when trying to connect the camera to the machine? Specifically, what is the M120 error and what is the error ID 51? | null | The solution to the M120-Camera connection failed error is to reconnect your camera to your computer or to the app you are using and restart the camera and app. If the issue persists, it may be necessary to update the camera |
Do you have a certain application or program that is being denied operation due to this error message? | null | The M7117 error occurs when the number of required assemblies exceeds the number of positioned cameras in a camera-based manufacturing process. To resolve this issue, you can either increase the number of positioned cameras or optimize the assembly |
What does the error message "M7019-The device abnormality has not been eliminated before automatic startup" mean? How can the device abnormality be eliminated before the device is automatically started up? | null | The solution for M7019 error is to first identify and eliminate the device abnormality before automatic startup. This can be achieved through manually testing the device and resetting it if necessary. |
What is the M7071-Y axis return to origin time has timed out error on a KM-ASSYM4-05 machine, and what are the possible reasons for this error occurring? | null | The M7071-Y axis return to origin time has timed out error indicates that the Y-axis slide table is not responding to commands. This can be due to a stuck or abnormal condition. To troubleshoot this issue |
One possible questions that you could ask about the error message "M7008-3 point detection failed, machine code of KM-ASSYM1-01 error id of 9" is:
What is the cause of this error and how can it be resolved? | null | The M7008-3 point detection failed error is typically caused by issues with the camera or computer hardware, improper software installation or settings, or insufficient light conditions. The solution may include checking for hardware malfunctions, updating software and |
What is the M028 error code for a conveyor belt machine in KM-ASSYH1-03? What is the error message associated with this code? | null | The solution to the error M028 is to follow the proper sequence of steps. This includes removing the TRAY plate from the conveyor belt before proceeding further. The system should be designed to ensure the correct order of steps are followed, |
What is the M94-The jacking cylinder in the work area rises abnormally (X24) error in KM-ASSYM5-03 error code 25? How does this problem occur and what can be done to prevent it from happening again? Is there anything | null | The solution for M94 error is to investigate whether the jacking cylinder is stuck during its rise. To do this, the operator needs to verify whether the cylinder is free to move and if it's rising smoothly. If the cyl |
What is the issue with the waiting plate position machine code of KM-BFT error id of 4? | null | The solution for the described error involves resetting the brake controller to its default settings, disconnecting the brake controller from the wiring harness, and manually lowering the cylinder using the brake pedal. If the problem pers |
One possible question about the solution for the "Jacking large cylinder lowering timeout alarm machine code of KM-BFT error id of 16" is:
what could be the underlying cause of the Jacking large cylinder lowering timeout alarm on the machine, and how might the machine code | null | The solution for the Jacking large cylinder lowering timeout alarm typically involves resetting the cylinder or implementing a workaround. It could also be due to a faulty valve or communication issue. Consult the owner's manual or contact a |
What is the meaning of the M7085-TE reply card station fail machine code in the context of a KM-ASSYM1-05 error id of 86? | null | The solution for the error described as M7085-TE may vary depending on the specific issue and configuration of the system. It could involve resetting or updating the reply card station, checking for communication issues, or consulting the system documentation for |
What could cause the error "Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first" when running machine code KM-ASSYH3-06 error id of 180? | null | The solution to the error "Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first" involves performing an equipment return to the origin first. This ensures |
What is the error message M7099 and what safety distance is specified in the error? | null | The solution to M7099 error code is to check the placement of the PCB board in a safe distance, either by physically adjusting the board or fixing the position of the jig or fixture using the appropriate tools. It is crucial |
What is the meaning of M95 and X21 machine codes in KM-ASSYM5-02?
What is the cause of the blocking cylinder abnormal descent in the work area?
How can this error be resolved using the provided machine code?
Does this error | null | The solution for M95- Abnormal descent of blocking cylinder in work area (X21) error involves checking the hydraulic cylinder, adjusting the screws and bushings, replacing or repairing the worn parts, |
What causes the error "Front section-M7068-rear suction nozzle presses down the cylinder-liter"? | null | The solution for the error described as Front section-M7068-rear suction nozzle presses down the cylinder-liter, and the extension is abnormal, please check sensor X34 is to investigate if there |
Can you explain what the error code M7033 indicates and what is a front buffer conveyor belt in this context? | null | The M7033 error message indicates that the front buffer conveyor belt is experiencing a discharging operation timeout. This occurs when the machine is jammed and prevents it from releasing its contents. To resolve this issue, please inspect the belt |
What is the purpose of the thermal paste machine code for the KM-ASSYM5-06 error id of M7000-Thermal paste is about to run out? | null | This error message usually appears on a printer to notify the user that the thermal paste is running out and the user needs to replace it before the printer will continue to function properly. The printer uses thermal paste to help maintain a consistent temperature of the printer head |
What are the possible reasons for the safety door or emergency stop machine code error in the KM-ASSYH4-07 machine? | null | The solution for the error "M7028-EMO&&DOOR is open, please check the safety door or emergency stop?" is to verify that the safety door or emergency stop is closed before operating the machine. If the safety door |
Can you explain what the error "Rear section-M7024-The conveyor belt product cannot return to the origin machine code of KM-ASSYH2-04 error id of 185" means? | null | This error occurs when a conveyor belt product is removed from its conveyor belt and cannot be returned to its original location. The solution may involve resetting the belt, verifying that the product is properly aligned, or contacting the manufacturer for assistance |
What does the Previous segment-M7028-Buffer area Tray is lost, please restart machine code of KM-ASSYH2-04 error id of 29 message mean? What could be causing this error? | null | The solution for the error "Previous segment-M7028-Buffer area Tray is lost, please restart" is to restart the printer. This error occurs when the buffer tray of the printer is full and needs to be cleared before the |
Here is a possible question related to the M122-Nozzle 2 vacuum abnormality error:
What does it mean when a machine encounters the M122-Nozzle 2 vacuum abnormality error code (PLC2-X5), and what are the | null | The M122 error code indicates a vacuum abnormality in Nozzle 2 of a PLC2-X5 machinery. The solution depends on the root cause, but it could involve cleaning the nozzle or replacing a damaged |
What is the M92 error message that you are receiving? | null | The solution for the M92 error is recommended to check the label discharging machine for an issue preventing it from functioning properly, or contact technical support for further assistance. |
What is the meaning of the message "Alarm: initial startup, there is material in the assembly line machine code of KM-ASSYM5-04 error id of 34"? | null | To fix the error described as Alarm: initial startup, there is material in the assembly line, you'll need to identify the source of the material and clear it from the assembly line. This may require adjusting your manufacturing processes or stopping production |
What is the error message "The abnormal internal product of the machine is untested machine code of KM-FPS error id of 13"? | null | Based on the description of the error, you should first identify the machine and its internal product that is causing the abnormality. Once you have identified the problem, test the product to determine the root cause of the abnormality, and take necessary |
What is the machine code of the label discharging machine that is causing the M92-The operation of the left label discharging machine has timed out error? | null | The solution for the M92 error is recommended to check the label discharging machine for an issue preventing it from functioning properly, or contact technical support for further assistance. |
What is the M135 error code for failed picture taking with the camera machine code of KM-ASSYM5-07, and what does it mean? | null | The M135 error message typically indicates a problem with the camera app on an Android device. Possible solutions include updating the app, restarting the device, clearing the cache and data of the camera app, running a virus scan, and checking |
What is the error message M7088-PLC timed out waiting for the signal from the host computer to complete the electronic scale clearing machine code of KM-ASSYM3-06 error id of 89? | null | The problem M7088-PLC timed out waiting for the signal from the host computer to complete the electronic scale clearing could be caused by a lack of a consistent connection between the PLC and the host computer. The solution may involve |
What does the M118-Nozzle 2 return to origin time timeout machine code mean?
What is the error id 49 and how does it relate to the M118-Nozzle 2 return to origin time timeout machine code?
What is the machine type KM | null | The M118 error occurs when the nozzle does not return to its original position within a specified time limit. To resolve this issue, you may need to adjust the nozzle's positioning parameters or limit the print speed. |
What is the M7075-Z axis error and what is the KM-ASSYM5-01 error code associated with it? How can the slide table be checked for abnormalities or obstructions? What is the recommended course of action to address this error? | null | To resolve the M7075 error where the Z axis return to origin has timed out, make sure to check the slide table abnormality or sticking condition. If it is normal, the problem may be with the encoder or the |
What is M99-The operation of the label discharging machine has timed out, please check the label discharging machine machine code of KM-ASSYM3-05 error id of 23? Can you provide more context on what the machine code and the error id represent? | null | The solution for the M92 error is recommended to check the label discharging machine for an issue preventing it from functioning properly, or contact technical support for further assistance. |
Can you provide more context about the error description and the equipment in question? What is the PLC model number and the type of equipment being used? What is the error ID 18? | null | The solution for the abnormal Front stage PLC1-M7017 equipment model setting is to set a new, valid model in the PLC. This can usually be done through the PLC's programming software or by physically reset |
What is the nature of the error message "M116-Nozzle 1 vacuum abnormality (PLC2-X4)" and how does it affect the operation of the KM-ASSYM3-05 machine? | null | The solution for the error M116-Nozzle 1 vacuum abnormality (PLC2-X4) typically involves checking for blockages or leaks in the nozzle and vacuum system, ensuring proper air supply, |
Possible question: A machine using a KM-ASSYM3-05 PLC is receiving error code M140-CCD reads PLC single-round completion signal timeout (read D720=1) when it attempts to communicate with a device via a DAC. What might | null | The solution for the error M140-CCD reads PLC single-round completion signal timeout (read D720=1) is to first verify that the PLC timer parameter is set correctly to match the time required for the |
What is the meaning of M7053 error and how is it related to reducing the glue amount in the assembly process? What is the context in which this error occurred (e.g., in which machine or system is it related)? What is the error id 54 and what does it indicate about | null | Reduce the current glue amount by using less adhesive, replacing damaged parts, or adjusting the bonding process to ensure proper adhesion. In some cases, the use of a different type of adhesive or solvent may |
What is the M7037 error message and what machine code is associated with it? Can you explain what a jamming between the upper and lower reaches of the machine means? What is the purpose of the rear buffer conveyor belt and how does it contribute to the machine's function? | null | M7037 error occurs when the discharging operation of the rear buffer conveyor belt times out and there is jamming between the upper and lower reaches of the machine. The solution is to clear any jamming in the machine, ensuring |
Can you provide more context on what machine or software you are experiencing the M7013-8 point detection failed error in, as well as the software version (KM-ASSYM1-01) and error id (14)? | null | M7013-8 point detection failed error can occur in AutoCAD when the program is unable to detect points accurately. One potential solution is to increase the accuracy of the point detection settings or to use a different type of point detection algorithm |
What is the purpose of the KM-ASSYM2-10 error id of 43 in a 3D printing solution? | null | The solution for error M112 could be to adjust the nozzle control parameters such as rate of speed and acceleration/deceleration or to upgrade the firmware of the printer. Additionally, you could also reduce the print speed |
What is the error code M7101 and how can it be resolved on a KM-ASSYM5-06 machine? | null | The solution for the error M7101 is to clean the scale pan using a cleaning tool provided by the scale manufacturer, and then to press the "Scale Pan Easy Clean Button" to reset the scale. If the problem persists, the |
Here are some possible questions related to this error:
1. What is the error "M107-X axis return to origin time timeout" in KM-ASSYM5-05?
2. How is this error related to the X axis return to origin time timeout machine code? | null | The error M107-X axis return to origin timeout indicates that the machine is experiencing a timing issue while returning to the origin position. This error typically occurs when there is a problem with the encoder or motor that is causing the axis to |
There are a few different possible causes for this error. Some possible questions that could help diagnose the issue are:
1. Are the two PLCs connected to each other physically? If not, this could be causing the communication connection to be interrupted.
2. Are the PLCs configured to communicate | null | The solution for the error described as "The communication connection between M84-PLC1 and PLC2 is interrupted" may involve checking the communication protocols, ensuring proper termination of the connection, checking the modems and communication cards, |
What is the M94- Abnormal rise of blocking cylinder in work area (X20) machine code? What is the function of the KM-ASSYM3-05 error id? Can you provide more information about the machinery involved and the possible causes of the error? | null | The M94 error code indicates a problem with the blocking cylinder in the work area. To fix this, follow these steps: Check that all the blocking cylinders are functioning properly and that no obstacles are blocking the work area. If |
What is the M96-The work area blocking cylinder is rising abnormally (X26) error message and what does it mean? Can you provide more details about the work area blocking cylinder in question, such as its location and function within the machine? What might cause the cylinder to rise | null | Check if the cylinder is stuck when rising. If the movement is restricted and the cylinder cannot fully extend, then the error M96-The work area blocking cylinder is rising abnormally (X26) may be caused by |
Does the error message "M7066-X axis left limit is abnormal, far away from the origin end (X6)" indicate that the X-axis of the machine has reached the left limit and is touching the slide table?
If the slide table is touching the left limit, could the | null | The M7066 error denotes that the left limit of the X axis is abnormal and far away from the origin end (X6). Checking whether the slide table touches the limit is recommended to solve this issue. |
What is the KM-ASSYH2-06 error id and what is the machine code that generated it? | null | The solution for the error "Rear section PLC2-M7030-There is material on the material throwing platform, please take it away first?" involves physical removal of any materials present on the material throw platform before continuing with the |
What is the M82 error and what is the purpose of the notification asking for a reset button before starting the automatic process machine code of KM-ASSYM2-07 with error id 13? | null | The solution to the M82 error described as "Please press the reset button before starting the automatic process" is to press the reset button and then restart the device or application that is producing the error. This will often clear any corrupted files or |
What is the cause of the descending abnormality problem with the work area blocking cylinder in the PLC1-M7037 control system? What specific sensor is being referenced in the error message, and what information can be obtained from it? What exactly does the KM-ASSYH | null | The solution for the error described could potentially involve checking sensor X53 to ensure that it is functioning properly, or it could require checking wiring connections and making any necessary repairs to the descending abnormally blocking cylinder in the front section of |
What is the safe distance of the PCB board and how is it determined? | null | The solution to M7099 error code is to check the placement of the PCB board in a safe distance, either by physically adjusting the board or fixing the position of the jig or fixture using the appropriate tools. It is crucial |
What is the product that is in the middle pressing area during startup of the machine, and how does it impact the startup process? | null | The M7021 error message indicates that there is a product in the middle pressing area during startup. To resolve the issue, remove the product from the area and check for any potential obstructions or debris that may be causing the issue. If |
What is the meaning of the error message "M7033-The discharging operation of the front Buffer conveyor belt has timed out. Please check whether there is a jam between the front Buffer and the work area in the machine."? How is this error related to machine code of KM- | null | The solution for the M7033 error described as "Discharging operation of the front Buffer conveyor belt has timed out" is to check for any jam or obstruction between the front Buffer and the work area in the machine |
Is the M7068-Y-axis servo driver experiencing an issue with its X-axis servo where it is throwing the error "ERROR"? Have you checked the machine code of the KM-ASSYM3-06 to determine if it is abnormal and causing this issue? | null | The error M7068-Y-axis servo NO readly(X15)&ERROR usually indicates that there is a failure in the communication between the X-axis servo driver and the printer. To solve the problem, it |
What is the purpose of the error message "M114-The right nozzle failed to pick up material for 3 consecutive times. Please check whether the Feeder discharging position is correct & whether the material belt is stuck?" in KM-ASSYM3-08 machine code? | null | The solution for the error M114 is to check the feeder discharging position and whether the material belt is stuck. If the feeder is discharging in the wrong position or the belt is stuck, the nozzle will |
How could the M7041 error occur, and what might it mean for the machine code of KM-ASSYM1-05 error id 42? | null | The M7041 error message indicates that the right blocking cylinder is descending abnormally and could be stuck. The solution is to check the cylinder for possible mechanical or electrical issues, such as worn or damaged seals, fault |
What is the issue being described in the M145-CCD error message? | null | The solution for the M145-CCD error is to check the communication with the CCD device and ensure that the necessary signal, D720=1, is being transmitted. The issue could also be resolved by resetting |
Can you provide more context or specifications about the machine and its intended use? | null | The solution for the described error is to check if the sensor X32 is functioning correctly. If the issue persists, then the front section-middle suction nozzle may be damaged and needs to be repaired or replaced. |
What is the nature of the M7119-CMC error, and what is the meaning of the "incorrect material number confirmation information"? How does the error code KM-ASSYM4-01 relate to this error? | null | The solution for M7119-CMC responding with incorrect material number confirmation information is to review and double-check the material number being entered, ensure it follows the correct format, and try resetting the device or running material verification checks. |
What is the issue causing the backend PLC2-M7056-Product No. 4 to fail in scanning the barcode? | null | There could be several possible reasons why the PLC2-M7056-Product No. 4 failed to scan the code. It is recommended to check if the barcode is damaged, dirty, or if there is any misalign |
1. What is the machine code of the labeling machine that is out of material?
2. What is the error id of the machine code out of material?
3. What machine is using the labeling machine?
4. What material is the machine code out of?
5. When did | null | The solution to the M70 error, "The labeling machine is out of material," can be resolved by either restocking the labeling machine with the appropriate labeling materials or by using a different labeling machine with an adequate supply of |
What steps can be taken to resolve the M7101 error message: "Please clean the scale pan and press the "Scale Pan Easy Clean Button" machine code of KM-ASSYM5-01 error id of 102"? | null | The solution for the error M7101 is to clean the scale pan using a cleaning tool provided by the scale manufacturer, and then to press the "Scale Pan Easy Clean Button" to reset the scale. If the problem persists, the |
What machine or system is experiencing the "waiting for the next camera to take pictures timed out 10S" error and what is the error code associated with it? | null | The solution for the error "Backend PLC1-M7024-waiting for the next camera to take pictures timed out 10S" could possibly involve checking if there are any conflicts with camera software or hardware, ver |
What is the reason for the M7000-Manual/Automatic Switching machine code of KM-ASSYM3-08 with error id of 115? | null | The solution for M7000-Manual/Automatic Switching Error depends on the specific error message and circumstances. Resetting the switch or modem may fix the issue, while updating firmware or contacting technical support may also resolve |
What is the error description for the M7032-buffer area conveyor belt card abnormality machine code of KM-ASSYH2-07? | null | The solution to the M7032-buffer area conveyor belt card abnormality error can be found by checking the belt speed and tension, verifying the connection between the card and the controller, and calibrating the belt position sensors |
End of preview. Expand
in Dataset Viewer.
README.md exists but content is empty.
Use the Edit dataset card button to edit it.
- Downloads last month
- 36