Datasets:

akshay0701

/

DocumentIDEFICS_QA_Test

like 0

train_0

What is described in this image?

lag [21]. First, the influence of cooling rate on structure formation was studied at subsequent heat

train_1

What is described in this image?

Figure 7. HaCaT cell growth on the electrospun PVA/PHB nanofibers mats with different blend composit

train_2

What is described in this image?

method, the total pore volume Vp is 0.564 cm3/g and an average pore radius rave = 5.0 nm. The inset

train_3

What is described in this image?

The quantitative TSM properties (Rr and Rr) for all the epoxy polymers are summarized in Table 2 and

train_4

What is described in this image?

It is known that physical ageing or crystallization can affect the barrier properties of polymeric m

train_5

What is described in this image?

Fig. 6(a) shows the XRD spectrum of pure CMC and pure PVA at ambient room temperature from 2° to 80°

train_6

What is described in this image?

This is shown by the dotted curve of the ACC component in Fig. 4. In Fig. 5(1)-(5), the ACC componen

train_7

What is described in this image?

stages of milling, flaky particles are also observed, and volume fraction of flaky particles continu

train_8

What is described in this image?

The reversing heat capacity for PET measured by the quasi-isothermal TMDSC on cooling from the melt

train_9

What is described in this image?

Fig. 5 The comparison of change in intensity of asymmetric S-N-S assigned as C-SO2-N bond manifests

train_10

What is described in this image?

Figure 2. Raman spectra of Fe2M03O12 at different temperatures. The Raman spectra of Y2M03O12 . xH2O

train_11

What is described in this image?

The glass transition temperature of the neat and MMMs were found by DSC to study the effect of the f

train_12

What is described in this image?

Fig. 6. SEM images of the fracture surface of PVA and PVA/graphene nanocomposite films. The fracture

train_13

What is described in this image?

For the calculation the measured points must be equidistant in time. In the Calisto software, it is

train_14

What is described in this image?

The thermal stability of the cured systems was investigated by TCA under nitrogen or air (Fig. 10) a

train_15

What is described in this image?

2. It is different from pure palmitic acid, solid-liquid phase transition presents two peaks at appr

train_16

What is described in this image?

The repeating unit of (I) is of mass 199 compared with 398 for (III). Oligomer spectra from these tw

train_17

What is described in this image?

We used a series of thermal treatments (Fig. 3) to demonstrate that melting and crystallization for

train_18

What is described in this image?

Fig. 4 Molecular mechanism of the quadruple-SME realized in PMMA/PEG(35) by using two gradient 7 , f

train_19

What is described in this image?

The tensile strength and Young's modulus of cured pure epoxy and its PNCs were investigated using a

train_20

What is described in this image?

The broadness of the glass transitions (ATg) Tgij, and Tg.c of poly(ST-random-nBA) and PS-block-PnBA

train_21

What is described in this image?

Three additional experiments were performed to study the photoinduced solid-to-liquid transitions. F

train_22

What is described in this image?

Various DSC protocols (Table 1) were used on the cod and tuna samples in order to detect different t

train_23

What is described in this image?

(TGA). Both studies were performed under a nitrogen atmosphere. The DSC trace and TGA thermogram are

train_24

What is described in this image?

In the environment with a water content higher than 50%, at the location of stripped coatings with

train_25

What is described in this image?

Figure 1. DSC thermograms of SessTe15_xPbx (x = 4, 6, 8 and 10) glasses at the heating rate of 20 K/

train_26

What is described in this image?

A shell-and-tube storage system is considered. It consists of one block made of graphite/salt materi

train_27

What is described in this image?

3.4.1. Circular dichroism spectroscopy Far UV-CD spectroscopy is executed to assess the changes in t

train_28

What is described in this image?

Fig. 5. Backscattered electron image of the bubble surface. other hand, the profile of 1a contains d

train_29

What is described in this image?

Fig. 4 shows the standard DSC heating traces for samples melt crystallized at different temperatures

train_30

What is described in this image?

PA, PES, PET and PU were derived from plastic packing materials, pellets and products. The purity of

train_31

What is described in this image?

Figure 1 | Phase transitions of ZIF-4 on heating. (a) Highlighting the rings and imidazolate linkage

train_32

What is described in this image?

Fig. 8 shows the results of specific modulus obtained for the samples of flax tapes. The specific mo

train_33

What is described in this image?

patterns. Fig. 5 shows the TR-XRD patterns of charged NCM and LP- NCM in the 20 range of 50–80°. Thi

train_34

What is described in this image?

A similar analysis was performed for the S-layer proteins of the studied L. kefir strains. Fig. 7 su

train_35

What is described in this image?

curves, above T , there is another endothermic peak, which could be attributed to the phase transiti

train_36

What is described in this image?

The TGA curves are presented in Figure 1 (parameters in Table SI, Supporting Information). The organ

train_37

What is described in this image?

(points B1-B5 in Figure 4), and the quadratic trend line was produced for them (Figure 4). (points B

train_38

What is described in this image?

Figure 8. (a) Local free-volume size v in propylene/ a-olefin copolymers catalyzed with zirconocene

train_39

What is described in this image?

As it can be seen in Fig. 4, the Netzsch and Mettler Toledo devices show unstable baselines. For the

train_40

What is described in this image?

Ozawa plots (Fig. 4) showing the relationship between In ß versus 1000/T can also be obtained using

train_41

What is described in this image?

The viscoelastic properties of PLA and the PLA/PCL blends were studied using DMA. A declining trend

train_42

What is described in this image?

Fig. 2 indicates the FT-IR spectra of pure blend and filled samples with different FL of BaTiO3. Fig

train_43

What is described in this image?

By homogenisation at 8000 rpm, all of the PCM-water mixtures were successfully emulsified. The avera

train_44

What is described in this image?

In order to study the electroluminescent characteristic and the effect of DDH layer thickness, the O

train_45

What is described in this image?

miscible polymer pair Thermal diffusion between two miscible polymers results in an interfacial phas

train_46

What is described in this image?

power compensation DSC 39 In heat flux DSC, which is used in the present research and its schematic

train_47

What is described in this image?

& Timm, 2012). DSC is a thermo-analytical technique that has been used for a long time to study the

train_48

What is described in this image?

The current and power efficiencies of the OLEDs are slightly related to the DDH layer thickness and

train_49

What is described in this image?

Figure 1. 1H NMR spectrum of CO, COSA, and ASCO. NMR spectra of CO, COSA, and ASCO are shown in Figu

train_50

What is described in this image?

To study the effects of cis content on Tg, PI samples with different cis contents were prepared by k

train_51

What is described in this image?

Here W1 and W2 are the mass fractions of the two polymers (in a binary mixture w1 + W2 = 1), Tg1 and

train_52

What is described in this image?

Fig. 3. Influence of T801 PPD on composition of wax precipitated from solution 1 at 15 ℃.

train_53

What is described in this image?

In order to study the electroluminescent characteristic and the effect of DDH layer thickness, the O

train_54

What is described in this image?

for bis(MI-npda) after each heating stage, as shown in Fig. 10. IR spectra indicate that the charact

train_55

What is described in this image?

Each Ca2+ cation coordinates four H2O molecules with mean Ca2+- O distance equals to 2.35 Å and four

train_56

What is described in this image?

Fig. 1 shows the X-ray diffraction patterns of as-prepared Sego -x Te20Znx (x = 2, 4, 6, 8 and 10) g

train_57

What is described in this image?

The DSC curve for [C4H5NH3]2SiF6 is presented in Fig. 1. It clearly exhibits two peaks which are loc

train_58

What is described in this image?

solution. Graphite was added during the preparation of cathode and anode to introduce the electronic

train_59

What is described in this image?

To examine the thermal events associated with the doped and undoped TiO2 powders, differential scann

train_60

What is described in this image?

(200) and (211) atomic planes in austenite. The major peak for the (110) austenite atomic plane was

train_61

What is described in this image?

respectively. Figure 12a and b present transition enthalpy and onset temperature (both melting and s

train_62

What is described in this image?

0.0017 wt.% H and balance Ti Table 1 lists the two groups of cylinders each 7 mm in diameter and 14

train_63

What is described in this image?

Figure 1 shows the heat capacity co of the sample liposomes as a function of temperature both withou

train_64

What is described in this image?

To analyze effects of the annealing temperature on enthalpy relaxation, bulk metallic glasses were a

train_65

What is described in this image?

The dependence of the crystallinity on the annealing time and the approximating curves for the studi

train_66

What is described in this image?

& is the vacuum permittivity, and C is the Curie-Weiss constant. Another feature of the temperature-

train_67

What is described in this image?

The results obtained from XRPD in combination with the TG/DTG and DSC analysis clearly identified GC

train_68

What is described in this image?

Then, graphene nanoplatelets were added to the melted sample based on the desired nano-PCM formulati

train_69

What is described in this image?

Fig. 17 Apparent specific heat capacity of the plaster with PCM addition-heating process Table 4 Res

train_70

What is described in this image?

functions as was shown in Figure 1.3752 The degree of the phase Figure 1. Examples of peak fitting a

train_71

What is described in this image?

Fig. 4. Effect of GLY concentration on the kinetics of drop volume (V) for edible films. The values

train_72

What is described in this image?

Fig. 2. FT-IR spectra of BP,, PMMA and micro-PCMs. 3. Results and discussion 3.1. Chemical structure

train_73

What is described in this image?

The authors discovered that a concentration of 10 wt% crosslinkers exhibited the best shape memory p

train_74

What is described in this image?

(LeMeste et al 1992). Starch (the main component of bread) exists as an amorphous or partially cryst

train_75

What is described in this image?

Figure 12 shows the temperature dependence on the E' for neat PP and its composites. The E' increase

train_76

What is described in this image?

The heat flow curves for a 125 nm thick polycarbonate film on Apiezon® grease are shown in Figure 1(

train_77

What is described in this image?

Figure 1. Chemical structure of N-methyl-N-propylpiperidinium Bis(trifluoromethyl sulfonyl) imide

train_78

What is described in this image?

TGA is used to estimate the thermal stability of the COPU-Si nanocomposite films as a function of si

train_79

What is described in this image?

If the structural entropy change of a continuous phase transition could be coupled to carrier transp

train_80

What is described in this image?

As shown in Fig. 3, the results obtained by visual observation indicate that binary systems are cate

train_81

What is described in this image?

The EDX local scanning was performed to investigate the surface elemental distribution of the microc

train_82

What is described in this image?

3.1.2 Effect of swelling on mechanical properties. Fig. 3 shows the temperature dependence of the st

train_83

What is described in this image?

To verify whether the trends observed for the present bitumens and related fractions are found in ot

train_84

What is described in this image?

Fig. 2(a) shows the temperature dependence of dielectric permittivity of the BHT bulk ceramics with

train_85

What is described in this image?

Figure 2. Temperatures of fusion Title as a function of the number of carbon atoms in the molecule:

train_86

What is described in this image?

A relaxation peak is clearly visible in the electric loss modulus M"(@) (orange symbols in Figure 4)

train_87

What is described in this image?

Fig. 1. Isothermal degradation of PHB. On the basis of the report from Hablot et al. (2008) the degr

train_88

What is described in this image?

and organistantinolosquaranten anto loraran matro tall organization and manas manas ministra masa ma

train_89

What is described in this image?

According to Eq. (4), a plot of ln[- ln(1 - α)] versus In β yield a straight line with slope equal t

train_90

What is described in this image?

The temperature dependence of dielectric permittivity & shows that the temperature of maximum value

train_91

What is described in this image?

Relaxation parameters Figure 1 shows the real (P = 20-200 s) and the imaginary Figure 2 shows the te

train_92

What is described in this image?

The as-cast Cu52.5Ti30Zr11.5Ni6 samples were determined, by XRD, to be fully amorphous, as shown in

train_93

What is described in this image?

The anomalous exothermal peak. Figure 1 shows the specific heat capacity, Cp, for two bulk metallic

train_94

What is described in this image?

°C. A thermocouple was embedded on the top surface of the sample, and annealing cycles were recorded

train_95

What is described in this image?

and DMA. 39 A number of studies have investigated P3HT:PCBM blends across the full composition range

train_96

What is described in this image?

Figure 2 shows a typical example. From the heat flow rate curves, as shown in Fig. 2, heat capacity,

train_97

What is described in this image?

Fig. 5. Melting temperatures and enthalpies of fatty acid based eutectic phase As evident from Fig.

train_98

What is described in this image?

(including polymers) have been clearly underlined [15-17]. Besides, the possibilities offered by the

train_99

What is described in this image?

Amorphous salicin was used as the model compound and subjected to the DSC thermal cycle illustrated