Datasets:

akshay0701

/

DocumentIDEFICS_QA_Test

like 0

train_100

What is described in this image?

As shown in Figure 5, it is obvious that the coating thickness and Tg first increase and then keep u

train_101

What is described in this image?

N2 solubility selectivity steadily enhances. CO2/CH4 and CO2/N2 solubility selectivity of the neat P

train_102

What is described in this image?

methodology is needed that would allow for comparing the DSC traces obtained for different samples.

train_103

What is described in this image?

~0℃, the profile between 20 and 70℃ could easily be mistaken to also include an exotherm that centre

train_104

What is described in this image?

The effect of ENR-50 on the tensile modulus (M100) of SBR/NBRr blends is presented in Fig. 2. It can

train_105

What is described in this image?

Figure 2. (a) Surface growth rates of selected compounds normalized to T. (b) Bulk growth rates of t

train_106

What is described in this image?

The wire was also heat treated at 325 ℃ for 100 min in order to separate the R and M transformations

train_107

What is described in this image?

Fig. 4. (a) Differential Scanning Calorimetry (DSC) and (b) Temperature History Method (THM) curves

train_108

What is described in this image?

Fig. 11. Fracture surface after tensile test: a) macro-structure; b) magnified microstructures of zo

train_109

What is described in this image?

Fig. 2. Crystallite size of BiFeO3 powder as a function of calcination temperature. were used for t

train_110

What is described in this image?

The two step continuous cooling procedure starts from a molten sample at 300 ℃, followed by cooling

train_111

What is described in this image?

Si Nanocomposites. Table 2 summarizes the tensile properties of the freestanding films of COPU-Si0 a

train_112

What is described in this image?

and EP/PSA composites were measured by DSC. The DSC curves of all of the samples are displayed in Fi

train_113

What is described in this image?

Figure 3 shows the stress-strain curve of virgin PLA, PP, and the uncompatibilized and compatibilize

train_114

What is described in this image?

structure models of four binders were constructed in the commercially available simulation software:

train_115

What is described in this image?

Fig. 12. Heat storage and release performance of RT21MC-5 wt. % RT58 before and after thermal cyclin

train_116

What is described in this image?

3.1. Characterization of the synthesized bare TiO2 nanoparticles Nanosized TiO2 colloids were obtain

train_117

What is described in this image?

as the donor material (Figure 3), which reduces the Tg of the Figure 3. Photographs of (a) P3HT:PCBM

train_118

What is described in this image?

A peak value of Von Mises stress of 1134 MPa at a depth of 352 µm was calculated based on the axial

train_119

What is described in this image?

therefore, an increase in elastic modulus upon addition of CNC would be expected. However, while CNC

train_120

What is described in this image?

A thermal stability of both polymorphs was studied by XRPD at variable temperature up to 170 °C. Acc

train_121

What is described in this image?

analysis. Figure 10 shows the FTIR spectra of the sample (sample e). This reformed DA polymer was fu

train_122

What is described in this image?

Figure 12. Thermal FORC in warming/cooling modes. (or down) to saturation. The HS fraction at Tb (or

train_123

What is described in this image?

Fig. 4. Cyclic voltammogram of DDH in 0.1 M Bu4NBF4 in acetonitrile solution performed in a three-e

train_124

What is described in this image?

Firstly, the dependence of Eiso on a is established using isoconversional methods. For each selected

train_125

What is described in this image?

Stress-strain curves of the neat and the modified samples in machine and in cross directions are sho

train_126

What is described in this image?

As discussed above, low-temperature DSC experiments showed two types of freezable water in coals, i.

train_127

What is described in this image?

FE-SEM images (Fig. 2) revealed a surface morphology characterized only by particles in a platelet s

train_128

What is described in this image?

Fig. 15 depicts the enlarged view of o' spectra of the (PVA-PVP)-x wt% ZnO films which exhibits dist

train_129

What is described in this image?

stacks of lamellar crystals [1,7,19,41,46] (Figs. 3a and 4a). ESEM images (Fig. 3) show that the mor

train_130

What is described in this image?

Figure 2a shows the composition-dependent o as a function of temperature, which generally decreases

train_131

What is described in this image?

In the present study we have employed a gelator (1) based on trip-phenylenevinylene (TPV) skeleton w

train_132

What is described in this image?

The glass transitions were obtained from the second heating cycle. The data is summarized in Table 2

train_133

What is described in this image?

Fig. 1. Water sorption isotherms of freeze-dried chia mucilage. The experimental sorption isotherms

train_134

What is described in this image?

Three RTILs were chosen specifically for use as electrolytes in electrochemical double layer capacit

train_135

What is described in this image?

The thermal stability and weight loss percentage of SiO2 paraffin, and the paraffin@SiO2 composite w

train_136

What is described in this image?

A linear relation should be obtained when In[T'△q/F(x)] is plotted as a function of (1/7) is shown i

train_137

What is described in this image?

maleimide )s The polymerization behavior of bis(benzoxazine-maleimide)s was studied by DSC by stepwi

train_138

What is described in this image?

Fig. 2. Process for the test of shape memory properties. The whole process was shown in Fig. 2.

train_139

What is described in this image?

In order to better clarify the metastable character of phases KII and KIII, in Fig. 7 we have compar

train_140

What is described in this image?

Figure 5. Above: Crystallization and melting temperatures (obtained from the data reported in Figure

train_141

What is described in this image?

Fig. 5. Temperature dependence of the heat capacity measured in heating DSC scans on samples of PET1

train_142

What is described in this image?

Figure 6. Results of TGA-DSC (a, c) and MS (b, d) analysis for nickel nitrate hydrate (a, c) and gly

train_143

What is described in this image?

is extruded, and then cools and recrystallizes, significantly changing bonding at least in the near

train_144

What is described in this image?

The tunability of T , of the studied system is presented in Figure 5. Figure Sa shows the storage mo

train_145

What is described in this image?

Figure 2 | SAXS/WAXS data on ZIF-4 (top) and ZIF-8 (bottom). (a) l(q/syx5 profiles of ZIF-4, with Lo

train_146

What is described in this image?

Fig. 2 shows the thermograms of DMPC and DMPE in the presence of increasing concentrations of THI. D

train_147

What is described in this image?

Figure 7. TGA curves of PVA/NaCl and PVA/Fe(NO3)3 nanocomposite fibers. Figure 7 shows the thermogra

train_148

What is described in this image?

Fig. 10(a) shows the TGA thermogram analysis of the fiber. It is observed that the fiber decomposed

train_149

What is described in this image?

Figure 5 shows the curves of the first heating on the DSC. The data regarding Tg and Tm in Table 5 w

train_150

What is described in this image?

The FTIR spectra of PEO and PEO/LiTFSI/POSS-PEG nanocomposites with different POSS-PEG concentration

train_151

What is described in this image?

Side-Chain Vibration Analysis. (a) Tryptophan Modes. The tryptophan band (760 cm-1) has been propose

train_152

What is described in this image?

The possibility of interstitial voids contributing to the measured porosity of polymer microbeads is

train_153

What is described in this image?

A typical DSC trace of SesoTe16Cu4 glass powders recorded at heating rates of 5, 10, 15 and 20 K/min

train_154

What is described in this image?

(Scheme 1). Fig. 1(a) and (b) display the 1H NMR spectra of coumarin-OH and coumarin-Py BZ, respecti

train_155

What is described in this image?

Fig. 3 Tg of NR/BR vulcanizates SMR10/50 NF; SMR10/55 NF. Normalized to the same total displacement

train_156

What is described in this image?

Figure 3. Effect of N339 carbon black filler ($ = 0.23), with and without cross-linking, on the loss

train_157

What is described in this image?

where o is a factor of pre-exponential, T is the absolute temperature, Ea stands for the activation

train_158

What is described in this image?

cylindrical specimens allowed the calculation of the compressive modulus as the slope of the linear

train_159

What is described in this image?

The PCM properties used in the analysis are given in Table 2 and results achieved are included in Ta

train_160

What is described in this image?

Fig. 7(a–d) shows SEM surface morphologies of CS-10 and CS-20 samples with and without 1.0 wt% glyce

train_161

What is described in this image?

11B MAS-NMR spectra of bismuth titanium borotellurite glasses are shown in Fig. 10. A sharp peak at

train_162

What is described in this image?

and their corresponding pure PS are shown in Figure 13a and 13b, respectively. Similarly, To of two

train_163

What is described in this image?

Coverage Effects. Figure 1 shows the adsorption isotherm from gravimetric data for PMMA adsorbed ont

train_164

What is described in this image?

The WAXD diffractograms are shown on Figure 10. On Figure 10(a) the WAXD pattern of the neat PLA and

train_165

What is described in this image?

The thermal glass transitions measured at 0.17 K/s (conventional DSC) and at 100 K/s (Flash DSC) are

train_166

What is described in this image?

The thermal behavior of the new polyurea material was studied by TGA and the thermal gravimetrical t

train_167

What is described in this image?

Solid-state 13C CP/MAS NMR analyses were performed for freeze-dried CNC and electrospun fiber webs p

train_168

What is described in this image?

increase in dielectric constant can be clarified based on the high charge carrier concentration and

train_169

What is described in this image?

Fig. 3a shows that a large amount of pores present in the sample V1, which was fabricated with scann

train_170

What is described in this image?

Transmission electron microscopy (TEM, Figure 2a) experiments confirmed that our synthetic products

train_171

What is described in this image?

Fig. 10 shows the stress dependence of the Ms, determined from the thermal cycling results shown in

train_172

What is described in this image?

Two wastewater effluent samples were extracted and measured using TGA-DSC. From the first sample (25

train_173

What is described in this image?

The optical micrographs of PLLA films annealed at 110 °C before and after alkaline hydrolysis are gi

train_174

What is described in this image?

The final fit equation is shown in Equation 17 and fitted to experimental data in Figure 39. Since t

train_175

What is described in this image?

A picture of the measurement set-up is shown in Fig. 4. A

train_176

What is described in this image?

Fig. 6. Small-angle XRD patterns of DAPAe, DAPAh and DAPAo at 20 °C. organized zones could be larger

train_177

What is described in this image?

Fig. 12 shows the results of a heating experiment with cy- Fig. 12. DSC heating curves for cyclohexa

train_178

What is described in this image?

Ionic conductivity, o, was measured as a function of salt concentration and temperature for SEO(16-1

train_179

What is described in this image?

The formation process of a mixture of two components, A and B, is illustrated by a cycle, as shown i

train_180

What is described in this image?

Thermal Stability. The TGA curves of PBS, PBSFs, and PBF are compared in Figure 7. The decomposition

train_181

What is described in this image?

Fig. 10. Tensile stress-strain behavior of PEO-15 wt% (LiCFySO3)-z (DOP) solid polymer electrolytes.

train_182

What is described in this image?

Lost heat is a systematic error that is addressed with calibration: i) for pan-style DSCs if and onl

train_183

What is described in this image?

X-ray Diffraction Studies. Figure 6 shows the XRD curves for pure PVA and the composites. The peaks

train_184

What is described in this image?

In freestanding thin polymer films, where the entire interface is available for diffusing out free v

train_185

What is described in this image?

Fig. 6. DSC - temperature program. Fig. 7. DSC - heat flow results for the temperature program from

train_186

What is described in this image?

Fig. 3 C 1s spectra of GO and DDS-GO are shown in Fig. 3 (for the spectra of HMDA-GO, see Fig. S3 in

train_187

What is described in this image?

The diffraction behavior of both the composite fibers and films is dominated by the PLA phase, which

train_188

What is described in this image?

FDSC was performed in power compensation mode using the Mettler-Toledo Flash-DSC 1. The sample suppo

train_189

What is described in this image?

Fig. 5 displays FTIR spectra, in the range 1850-1650 cm-1, that reveal the presence of specific inte

train_190

What is described in this image?

under a N2 atmosphere. Fig. 10 presents the DSC profiles of poly(MIPOSS), poly(S-alt-MIPOSS), poly(A

train_191

What is described in this image?

Fig. 7 focuses on the initial melting temperature Tm,i, as determined both from DSC and OCM. OCM ima

train_192

What is described in this image?

UV–Vis transmission spectra of control and gelatin–tannin films are shown in Fig. 3. As the tannin c

train_193

What is described in this image?

for the biodegradation study of polyethylene films with prooxidant additives [20,17]. Data recorded

train_194

What is described in this image?

Fig. 11 AFM topography images of Bit-B using various sample preparation techniques: (a) spin cast ra

train_195

What is described in this image?

Fig. 1. UV–Visible absorption characteristics of the prepared ZnS NCs dispersed in methanol. UV-Visi

train_196

What is described in this image?

HMODAz as an AB-type monomer was synthesized in four step reactions (Scheme 1), and the structure of

train_197

What is described in this image?

(Fig. 3.1) (Chen et al. 2010). Fig. 3.1 Schematic representation of MJLCPs and the formation of diff

train_198

What is described in this image?

Fig. 7. Degree of hydration for mortar specimens at the age of 28 days with different PCM fractions

train_199

What is described in this image?

The evolution of crystalline phase composition during heating of pure monoclinic rare-earth niobate