text
stringlengths 1
298
|
|---|
[ |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set system host-name R1", |
"output": "This device is called R1." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set system host-name R2", |
"output": "This device is called R2." |
}, |
{ |
"instruction": "Clarify the operation of this command.", |
"input": "set interfaces ge-0/0/0 unit 0 family inet address 100.10.30.167/24", |
"output": "Interface ge-0/0/0.0 has an IP address of 100.1.30.167/24." |
}, |
{ |
"instruction": "What is the function of this command?", |
"input": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.10.240/24", |
"output": "Interface ge-0/0/1.0 has an IP address of 192.168.10.240/24." |
}, |
{ |
"instruction": "What action does this command perform?", |
"input": "set interfaces ge-0/0/2 unit 0 family inet address 192.168.20.240/24", |
"output": "Interface ge-0/0/2.0 has an IP address of 192.168.20.240/24." |
}, |
{ |
"instruction": "Clarify the operation of this command.", |
"input": "set routing-instances Route1 instance-type forwarding", |
"output": "The routing instance of Route 1 is of type forwarding." |
}, |
{ |
"instruction": "Describe what this command is used for.", |
"input": "set routing-instances Route2 instance-type forwarding", |
"output": "The routing instance of Route 2 is of type forwarding." |
}, |
{ |
"instruction": "What action does this command perform?", |
"input": "set protocols ospf area 0.0.0.0 interface ge-0/0/2.0", |
"output": "Interface ge-0/0/2.0 is included in ospf area 0.0.0.0. In this case, the interface ge-0/0/2.0 is participating in OSPF and is part of the backbone area (area 0.0.0.0), meaning that OSPF will exchange routing information for networks connected to this interface within that area." |
}, |
{ |
"instruction": "What is the function of this command?", |
"input": "set protocols ospf area 0.0.0.0 interface ge-0/0/4.0", |
"output": "Interface ge-0/0/4.0 is included in ospf area 0.0.0.0. In this case, the interface ge-0/0/4.0 is participating in OSPF and is part of the backbone area (area 0.0.0.0), meaning that OSPF will exchange routing information for networks connected to this interface within that area." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set interfaces ge-0/0/3 unit 0 family inet filter output TEST_FILTER1", |
"output": "The output filter named TEST_FILTER1 is applied to the interface ge-0/0/3.0. The output filter controls and filters the traffic being sent out of the interface based on the rules defined in TEST_FILTER1. " |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set system host-name R8", |
"output": "This device is called R8." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set protocols ospf area 0.0.0.0 interface ge-0/0/5.0", |
"output": "Interface ge-0/0/5.0 is included in ospf area 0.0.0.0." |
}, |
{ |
"instruction": "Describe what this command is used for.", |
"input": "set interfaces lo0 unit 0 family inet address 10.0.0.1/32", |
"output": "The loopback interface lo0.0 has an IP address of 10.0.0.1/32." |
}, |
{ |
"instruction": "What action does this command perform?", |
"input": "set interfaces ge-0/0/1 unit 0 family inet filter input AdminAccess", |
"output": "The input filter named AdminAccess is applied to the interface ge-0/0/1.0." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set system time-zone UTC", |
"output": "The system time-zone is set to UTC." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set firewall family inet filter MyFilter term allow-ping then accept", |
"output": "The firewall filter named MyFilter allows ping traffic (ICMP) and accepts it." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set interfaces ge-0/0/0 unit 0 family inet address 172.16.0.1/24", |
"output": "Interface ge-0/0/0.0 has an IP address of 172.16.0.1/24." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set protocols ospf area 0.0.0.0 interface lo0.0", |
"output": "The loopback interface lo0.0 is included in ospf area 0.0.0.0." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set system services ssh protocol-version v2", |
"output": "SSH service is enabled using protocol version 2." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set routing-options static route 10.0.0.0/8 next-hop 192.168.1.1", |
"output": "A static route to 10.0.0.0/8 is set with next-hop 192.168.1.1." |
End of preview. Expand
in Dataset Viewer.
No dataset card yet
New: Create and edit this dataset card directly on the website!
Contribute a Dataset Card- Downloads last month
- 5