text
stringlengths 1
298
|
|---|
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set system host-name R6", |
"output": "This device is called R6." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set interfaces ge-0/0/0 unit 0 family inet address 10.0.1.2/24", |
"output": "Interface ge-0/0/0.0 has an IP address of 10.0.1.2/24." |
}, |
{ |
"instruction": "What is the function of this command?", |
"input": "set interfaces ge-0/0/1 unit 0 family inet address 10.0.2.1/24", |
"output": "Interface ge-0/0/1.0 has an IP address of 10.0.2.1/24." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set interfaces ge-0/0/2 unit 0 family inet address 10.0.3.1/24", |
"output": "Interface ge-0/0/2.0 has an IP address of 10.0.3.1/24." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0", |
"output": "Interface ge-0/0/1.0 is included in ospf area 0.0.0.0." |
}, |
{ |
"instruction": "What action does this command perform?", |
"input": "set system host-name R7", |
"output": "This device is called R7." |
}, |
{ |
"instruction": "Describe what this command is used for.", |
"input": "set services nat rule NAT_TEST_RULE term LAB1 from source-address 192.168.11.10/32", |
"output": "NAT rule is applied to match traffic from source address 192.168.11.10/32." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set services nat rule NAT_TEST_RULE term LAB1 then translated source-prefix 10.0.2.3/32", |
"output": "The source address is translated to 10.0.2.3/32 as part of NAT rule NAT_TEST_RULE." |
}, |
{ |
"instruction": "Describe what this command is used for.", |
"input": "set services nat rule NAT_TEST_RULE term LAB1 then translated translation-type basic-nat44", |
"output": "The translation type is basic NAT44 as specified by the NAT rule." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set system host-name R4", |
"output": "This device is called R4." |
}, |
{ |
"instruction": "What is the function of this command?", |
"input": "set interfaces ge-0/0/0 unit 0 family inet address 192.168.30.242/24", |
"output": "Interface ge-0/0/0.0 has an IP address of 192.168.30.242/24." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.31.1/24", |
"output": "Interface ge-0/0/1.0 has an IP address of 192.168.31.1/24." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set interfaces ge-0/0/2 unit 0 family inet service input service-set NAT-SET", |
"output": "The input service-set NAT-SET is applied to the interface ge-0/0/2.0." |
}, |
{ |
"instruction": "What is the function of this command?", |
"input": "set interfaces ge-0/0/2 unit 0 family inet address 192.168.32.1/24", |
"output": "Interface ge-0/0/2.0 has an IP address of 192.168.32.1/24." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0", |
"output": "Interface ge-0/0/1.0 is included in ospf area 0.0.0.0." |
}, |
{ |
"instruction": "Explain the purpose of this command.", |
"input": "set system time-zone Asia/Seoul", |
"output": "The system time-zone is set to Asia/Seoul." |
}, |
{ |
"instruction": "What does this command achieve?", |
"input": "set interfaces lo0 unit 0 family inet filter input AdminHost-Acess", |
"output": "The loopback interface lo0.0 has an input filter named AdminHost-Acess." |
}, |
{ |
"instruction": "Clarify the operation of this command.", |
"input": "set firewall family inet filter AdminHost-Acess term allow-ssh then accept", |
"output": "The firewall filter allows SSH traffic from the source address." |
}, |
{ |
"instruction": "Can you explain the use of this command?", |
"input": "set firewall family inet filter AdminHost-Acess term default-deny then discard", |
"output": "All traffic not matching the firewall rules will be discarded." |
} |
] |